Set Keyboard Map (SETKBDMAP)

The Set Keyboard Map (SETKBDMAP) command allows the user to override the PA (Program Attention) and PF (Program Function) key assignment defaults provided by the system.

This command assigns the specified F-to-PF map to the device where the command was entered (if it is a 3270 display station device) or to the 3270 display station specified if the user has authority to that device. More information on the user-assignment keyboard mapping is in Remote Work Station Support book, SC41-5402 book.

Parameters

Keyword Description Choices Notes
DEV Device Name, *REQUESTER Optional, Positional 1
PF1 PF1 key value *HELP, *ATTN, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF2 PF2 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF3 PF3 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF4 PF4 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF5 PF5 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF6 PF6 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF7 PF7 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF8 PF8 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF9 PF9 key value *NONE, *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF10 PF10 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF11 PF11 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF12 PF12 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF13 PF13 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF14 PF14 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF15 PF15 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF16 PF16 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF17 PF17 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF18 PF18 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF19 PF19 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF20 PF20 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF21 PF21 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF22 PF22 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF23 PF23 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PF24 PF24 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF1 PA1-PF1 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF2 PA1-PF2 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF3 PA1-PF3 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF4 PA1-PF4 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF5 PA1-PF5 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF6 PA1-PF6 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF7 PA1-PF7 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF8 PA1-PF8 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF9 PA1-PF9 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF10 PA1-PF10 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF11 PA1-PF11 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA1PF12 PA1-PF12 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF1 PA2-PF1 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF2 PA2-PF2 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF3 PA2-PF3 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF4 PA2-PF4 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF5 PA2-PF5 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF6 PA2-PF6 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF7 PA2-PF7 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF8 PA2-PF8 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF9 PA2-PF9 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF10 PA2-PF10 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF11 PA2-PF11 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional
PA2PF12 PA2-PF12 key value *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12 Optional

Device (DEV)

Specifies a valid 3270 display station that is assigned this keyboard mapping function.

The possible values are:

*REQUESTER
This mapping is assigned to the device where the command is entered.
device-name
Specify the name of the device to which the new keyboard mapping is to apply. You must have allocation rights to the specified device.

PF1 key value (PF1)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF2 key value (PF2)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF3 key value (PF3)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF4 key value (PF4)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF5 key value (PF5)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF6 key value (PF6)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF7 key value (PF7)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF8 key value (PF8)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF9 key value (PF9)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF10 key value (PF10)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF11 key value (PF11)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF12 key value (PF12)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF13 key value (PF13)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF14 key value (PF14)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF15 key value (PF15)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF16 key value (PF16)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF17 key value (PF17)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF18 key value (PF18)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF19 key value (PF19)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF20 key value (PF20)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF21 key value (PF21)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF22 key value (PF22)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF23 key value (PF23)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PF24 key value (PF24)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF1 key value (PA1PF1)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF2 key value (PA1PF2)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF3 key value (PA1PF3)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF4 key value (PA1PF4)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF5 key value (PA1PF5)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF6 key value (PA1PF6)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF7 key value (PA1PF7)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF8 key value (PA1PF8)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF9 key value (PA1PF9)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF10 key value (PA1PF10)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF11 key value (PA1PF11)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA1-PF12 key value (PA1PF12)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF1 key value (PA2PF1)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF2 key value (PA2PF2)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF3 key value (PA2PF3)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF4 key value (PA2PF4)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF5 key value (PA2PF5)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF6 key value (PA2PF6)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF7 key value (PA2PF7)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF8 key value (PA2PF8)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF9 key value (PA2PF9)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF10 key value (PA2PF10)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF11 key value (PA2PF11)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

PA2-PF12 key value (PA2PF12)

Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.

The possible functions that can be assigned are:

*HELP
5250 Help
*HLP3270
3270 Help Text (Display Active Keyboard Map)
*CLEAR
Clear Screen
*PRINT
Print Screen
*DSPATR
Display Imbedded Attributes
*TEST
Test Request
*DOWN
Roll Down
*UP
Roll Up
*NONE
No Assignment
*RESET
Error Reset
*SYSREQ
System Request
*BCKSPC
Record Backspace
*ATTN
Attention
*F1-*F24
F1 through F24 Function Keys

Restrictions:

*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:

The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.

It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.

The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.

Examples 

SETKBDMAP   PF1(*F1)  PF2(*F2)  PF3(*F3)
            PF4(*F4)  PF5(*HLP3270)  PF9(*HELP)

This command reassigns the keyboard primarily for an application that makes frequent use of the 5250 CF keys F1, F2, F3, F4. All other PF key sequences are set to the default shown on the command prompt. The above command is started in the program that started the application (thus tailoring the display station to whatever application is run).

Error messages

*ESCAPE Messages

CPF8701
Specified device &1 not a 3270 device type.
CPF8702
&1 function key not correctly defined.
CPF8703
Device &1 not ready.