Remove TCP/IP Remote System (RMVTCPRSI)
| Where allowed to run: All environments (*ALL) Threadsafe: No |
Parameters Examples Error messages |
The Remove TCP/IP Remote System (RMVTCPRSI) command removes a remote system information entry that associates an internet address with an X.25 network address in the TCP/IP configuration.
If you attempt to remove a remote system information entry that is associated with an internet address that is active on an X.25 network's SVC or PVC, the remove operation fails.
Restrictions:
- You must have input/output system configuration (*IOSYSCFG) special authority to run this command.
| Top |
Parameters
| Keyword | Description | Choices | Notes |
|---|---|---|---|
| INTNETADR | Internet address | Character value | Required, Positional 1 |
| Top |
Internet address (INTNETADR)
Specifies the internet address of the remote system. The internet address is specified in the form nnn.nnn.nnn.nnn, where nnn is a decimal number ranging from 0 through 255. An internet address is not valid if it has a value of all binary ones or all binary zeros for the network identifier (ID) portion or the host ID portion of the address. If the internet address is entered from a command line, the address must be enclosed in apostrophes.
| Top |
Examples
RMVTCPRSI INTNETADR('128.1.1.10')
This command removes the internet address named 128.1.1.10 from the TCP/IP configuration remote system information data, along with its corresponding X.25 network address and other data.
| Top |
Error messages
*ESCAPE Messages
- TCP1D03
- &1 member record length not correct.
- TCP1D04
- Error occurred processing member &1 of &2/&3.
- TCP1901
- Internet address &2 not valid.
- TCP1902
- Internet address &1 not valid.
- TCP1908
- Internet address &1 not valid.
- TCP26D4
- Remote system information not removed.
- TCP26D5
- Error occurred processing file.
- TCP8050
- *IOSYSCFG authority required to use &1.
- TCP9999
- Internal system error in program &1.
| Top |