Initialize IBM i Access (INZPCS)
| Where allowed to run: All environments (*ALL) Threadsafe: No |
Parameters Examples Error messages |
The Initialize IBM i Access (INZPCS) command allows you to establish an operating environment for IBM i Access applications by creating various control documents on the IBM i Access folders. These control documents include code page mapping tables, keyboard tables, and font files used for displaying information on the personal computer display.
Note: Do not precede an entry with an asterisk unless that entry is a "special value" that is shown (on the display itself or in the help information) with an asterisk.
Error messages for INZPCS
*ESCAPE Messages
- IWS16D0
- Initialize IBM i Access (INZPCS command) failed.
- IWS16DD
- Error getting message &1 from message file &2 in library &3.
- IWS16E1
- INZPCS command successfully completed.
- IWS16E2
- Error retrieving data area &1 in library &2.
- IWS16E3
- Error creating data area QINZPCSDA in library QUSRSYS.
- IWS16E4
- Error updating data area QINZPCSDA in library QUSRSYS.
- IWS16EE
- Failed to delete data area &1 in library &2.
| Top |
Parameters
| Keyword | Description | Choices | Notes |
|---|---|---|---|
| KBDTYPE | Keyboard type | *DFT, AGB, AGI, ALI, BGB, BLI, BRB, CAB, CAI, CLB, CSB, DMB, DMI, ESB, FNB, FNI, FAB, FAI, FQB, FQI, GKB, GNB, HNB, ICB, ICI, INB, INI, IRB, ITB, ITI, JEB, JEI, JKB, JPB, JUB, KAB, KOB, LAB, LTB, LVB, MKB, NCB, NEB, NEI, NWB, NWI, PKB, PLB, PRB, PRI, RCB, RMB, RUB, SKB, SPB, SPI, SQB, SSB, SSI, SWB, SWI, SFI, SGI, TAB, THB, TKB, TRB, UAB, UKB, UKI, USB, USI, VNB, YGI | Optional, Positional 1 |
| ASCII | ASCII code page number | *DFT, 437, 720, 737, 775, 813, 819, 850, 851, 852, 855, 856, 857, 860, 861, 862, 863, 864, 865, 866, 868, 869, 874, 891, 897, 903, 904, 912, 915, 916, 920, 921, 922, 1004, 1006, 1008, 1040, 1041, 1042, 1043, 1046, 1088, 1089, 1098, 1114, 1115, 1124, 1125, 1127, 1129, 1131, 1133 | Optional |
| EBCDIC | EBCDIC code page number | *DFT, 037, 256, 273, 277, 278, 280, 284, 285, 290, 297, 420, 423, 424, 500, 833, 836, 838, 870, 871, 875, 880, 918, 1025, 1026, 1027, 1047, 1097, 1112, 1122, 1123, 1130, 1132 | Optional |
| LANGUAGE | Language feature code | *DFT, *ALL, 2902, 2903, 2904, 2905, 2906, 2909, 2911, 2912, 2913, 2914, 2922, 2923, 2924, 2925, 2926, 2928, 2929, 2930, 2931, 2932, 2933, 2937, 2938, 2939, 2940, 2942, 2950, 2954, 2956, 2957, 2958, 2961, 2962, 2963, 2966, 2972, 2974, 2975, 2976, 2978, 2979, 2980, 2981, 2984, 2986, 2987, 2989, 2992, 2994, 2995, 2996, 2998 | Optional |
| Top |
Keyboard type (KBDTYPE)
Specifies the keyboard type used.
The possible values are:
- *DFT
- The default keyboard type is used. When the command is run initially, the default value comes from the system value QKBDTYPE. When the command is run after the initial time, the default takes the value specified at the previous running of the command.
- keyboard-type
- Specify the 3-character keyboard type to use. Values are listed in the Character Translation Table.
Character Translation Table
- Identifier
- Language
- AGB
- Austria/Germany
- AGI
- Austria/Germany Multinational
- ALI
- Albania
- BGB
- Bulgaria
- BLI
- Belgium Multinational
- BRB
- Brazil
- CAB
- Canadian/French
- CAI
- Canadian/French Multinational
- CLB
- Arabic X/Basic
- CSB
- Czech Republic
- DMB
- Denmark
- DMI
- Denmark Multinational
- ESB
- Estonia
- FNB
- Finland/Sweden
- FNI
- Finland/Sweden Multinational
- FAB
- France (Azerty)
- FAI
- France (Azerty) Multinational
- FQB
- France (Qwerty)
- FQI
- France (Qwerty) Multinational
- GKB
- Greece
- GNB
- Greece
- HNB
- Hungary
- ICB
- Iceland
- ICI
- Iceland Multinational
- INB
- International
- INI
- International Multinational
- IRB
- Iran (Farsi)
- ITB
- Italy
- ITI
- Italy Multinational
- JEB
- Japan (English)
- JEI
- Japan (English) Multinational
- JKB
- Japan (Kanji)
- JPB
- Japan (Latin Extended)
- JUB
- Japan (U.S. Basic)
- KAB
- Japan (Katakana)
- KOB
- Korea
- LAB
- Laos
- LTB
- Lithuania
- LVB
- Latvia
- MKB
- FYR Macedonia Former Yugoslavia Republic
- NCB
- Hebrew
- NEB
- Netherlands
- NEI
- Netherlands Multinational
- NWB
- Norway
- NWI
- Norway Multinational
- PKB
- Pakistan (Urdu)
- PLB
- Poland
- PRB
- Portugal
- PRI
- Portugal Multinational
- RCB
- Simplified Chinese
- RMB
- Romania
- RUB
- Russia
- SKB
- Slovakia
- SPB
- Spain
- SPI
- Spain Multinational
- SQB
- Serbia (Cyrillic)
- SSB
- Spanish Speaking
- SSI
- Spanish Speaking Multinational
- SWB
- Sweden
- SWI
- Sweden Multinational
- SFI
- Switzerland/France Multinational
- SGI
- Switzerland/Germany Multinational
- TAB
- Traditional Chinese
- THB
- Thailand (used only with language 2924)
- TKB
- Turkey (Qwerty)
- TRB
- Turkey (F)
- UAB
- Ukraine
- UKB
- United Kingdom
- UKI
- United Kingdom Multinational
- USB
- United States/Canada
- USI
- United States/Canada Multinational
- VNB
- Vietnam
- YGI
- Languages of the Former Yugoslavia (Latin)
| Top |
ASCII code page number (ASCII)
Specifies the ASCII code page number to use.
Note: When you are running the INZPCS command for a double byte language, use the single byte code page for this language. INZPCS only needs to process single byte code pages. Double byte code page support is available without the use of INZPCS.
The possible values are:
- *DFT
- The default code page number is used. When the command is run initially, the default value is 437 for keyboard types USB and USI, and 850 for most others. When the command is run after the initial time, the default takes the value specified at the previous running of the command.
- code-page-number
- Specify the ASCII code page number to use.
| Top |
EBCDIC code page number (EBCDIC)
Specifies the EBCDIC (or host) code page number to use.
Note: When you are running the INZPCS command for a double byte language, use the single byte code page for this language. INZPCS only needs to process single byte code pages. Double byte code page support is available without the use of INZPCS.
- *DFT
- The default system code page number is used. When the command is run initially, the default value comes from the code page portion of the system value QCHRID. When the command is run after the initial time, the default takes the value specified at the previous running of the command.
- code-page-number
- Specify the EBCDIC (or host) page number to use.
| Top |
Language feature code (LANGUAGE)
Specifies the language feature identifier (ID) of the secondary language to be processed.
The possible values are:
- *DFT
- The primary language of IBM i Access should be processed.
- language-feature-code
- Specify the language feature code of the language to process. Values are listed in the Language Feature Identifier Table.
Language Feature Identifier Table
- Identifier
- Language
- 2902
- Estonian
- 2903
- Lithuanian
- 2904
- Latvian
- 2905
- Vietnamese
- 2906
- Lao
- 2909
- Belgian English
- 2911
- Slovenian
- 2912
- Croatian
- 2913
- Macedonian
- 2914
- Serbian
- 2922
- Portuguese
- 2923
- Dutch
- 2924
- English
- 2925
- Finnish
- 2926
- Danish
- 2928
- French
- 2929
- German
- 2930
- Japanese Universal
- 2931
- Spanish
- 2932
- Italian
- 2933
- Norwegian
- 2937
- Swedish
- 2938
- English Uppercase/DBCS
- 2939
- German-MNCS
- 2940
- French-MNCS
- 2942
- Italian-MNCS
- 2950
- English Uppercase
- 2954
- Arabic
- 2956
- Turkish
- 2957
- Greek
- 2958
- Icelandic
- 2961
- Hebrew
- 2962
- Japanese (DBCS)
- 2963
- Belgium Dutch
- 2966
- Belgium French
- 2972
- Thai
- 2974
- Bulgarian
- 2975
- Czech
- 2976
- Hungarian
- 2978
- Polish
- 2979
- Russian
- 2980
- Brazilian Portuguese
- 2981
- Canadian French
- 2984
- English U/L (DBCS)
- 2986
- Korean (DBCS)
- 2987
- Traditional Chinese (DBCS)
- 2989
- Simplified Chinese (DBCS)
- 2992
- Romanian
- 2994
- Slovakian
- 2995
- Albanian
- 2996
- Portuguese-MNCS
- 2998
- Farsi
| Top |
Examples
None| Top |
Error messages
*ESCAPE Messages
- IWS16D0
- Initialize IBM i Access (INZPCS command) failed.
- IWS16DD
- Error getting message &1 from message file &2 in library &3.
- IWS16E1
- INZPCS command successfully completed.
- IWS16E2
- Error retrieving data area &1 in library &2.
- IWS16E3
- Error creating data area QINZPCSDA in library QUSRSYS.
- IWS16E4
- Error updating data area QINZPCSDA in library QUSRSYS.
- IWS16EE
- Failed to delete data area &1 in library &2.
| Top |