Change Keyboard Map (CHGKBDMAP)
Where allowed to run: All environments (*ALL) Threadsafe: No |
Parameters Examples Error messages |
The Change Keyboard Map (CHGKBDMAP) command allows the user to change the PA (Program Attention) and PF (Program Function) key assignment defaults. This command changes the specified F-to-PF map to the device on which the command was entered (if it is a 3270 work station device), or to the 3270 work station specified if the user has authority to that device. More information on user-assignable keyboard mapping is in Remote Work Station Support book, SC41-5402 book.
Top |
Parameters
Keyword | Description | Choices | Notes |
---|---|---|---|
DEV | Device | Name, *REQUESTER | Optional, Positional 1 |
PF1 | PF1 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF2 | PF2 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF3 | PF3 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF4 | PF4 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF5 | PF5 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF6 | PF6 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF7 | PF7 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF8 | PF8 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF9 | PF9 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF10 | PF10 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF11 | PF11 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF12 | PF12 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF13 | PF13 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF14 | PF14 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF15 | PF15 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF16 | PF16 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF17 | PF17 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF18 | PF18 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF19 | PF19 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF20 | PF20 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF21 | PF21 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF22 | PF22 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF23 | PF23 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PF24 | PF24 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF1 | PA1-PF1 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF2 | PA1-PF2 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF3 | PA1-PF3 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF4 | PA1-PF4 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF5 | PA1-PF5 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF6 | PA1-PF6 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF7 | PA1-PF7 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF8 | PA1-PF8 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF9 | PA1-PF9 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF10 | PA1-PF10 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF11 | PA1-PF11 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA1PF12 | PA1-PF12 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF1 | PA2-PF1 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF2 | PA2-PF2 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF3 | PA2-PF3 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF4 | PA2-PF4 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF5 | PA2-PF5 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF6 | PA2-PF6 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF7 | PA2-PF7 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF8 | PA2-PF8 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF9 | PA2-PF9 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF10 | PA2-PF10 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF11 | PA2-PF11 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
PA2PF12 | PA2-PF12 key value | *ATTN, *HELP, *HLP3270, *CLEAR, *PRINT, *DSPATR, *TEST, *DOWN, *UP, *NONE, *RESET, *SYSREQ, *BCKSPC, *F13, *F14, *F15, *F16, *F17, *F18, *F19, *F20, *F21, *F22, *F23, *F24, *F1, *F2, *F3, *F4, *F5, *F6, *F7, *F8, *F9, *F10, *F11, *F12, *SAME | Optional |
Top |
Device (DEV)
Specifies a valid 3270 display station that is assigned keyboard changes by using the keyboard mapping command. The user must have allocation authority to the specified device before entering the command. In a program environment, the user should either acquire or allocate the specified device before entering this command.
The possible values are:
- *REQUESTER
- These PF key changes are assigned to the device on which the command was entered.
- device-name
- Specify the name of the device to which the new keyboard mapping is to apply. You must have allocation rights to the specified device.
Top |
PF1 key value (PF1)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF2 key value (PF2)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF3 key value (PF3)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF4 key value (PF4)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF5 key value (PF5)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF6 key value (PF6)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF7 key value (PF7)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF8 key value (PF8)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF9 key value (PF9)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF10 key value (PF10)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF11 key value (PF11)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF12 key value (PF12)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF13 key value (PF13)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF14 key value (PF14)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF15 key value (PF15)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF16 key value (PF16)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF17 key value (PF17)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF18 key value (PF18)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF19 key value (PF19)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF20 key value (PF20)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF21 key value (PF21)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF22 key value (PF22)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF23 key value (PF23)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PF24 key value (PF24)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF1 key value (PA1PF1)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF2 key value (PA1PF2)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF3 key value (PA1PF3)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF4 key value (PA1PF4)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF5 key value (PA1PF5)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF6 key value (PA1PF6)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF7 key value (PA1PF7)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF8 key value (PA1PF8)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF9 key value (PA1PF9)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF10 key value (PA1PF10)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF11 key value (PA1PF11)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA1-PF12 key value (PA1PF12)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF1 key value (PA2PF1)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF2 key value (PA2PF2)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF3 key value (PA2PF3)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF4 key value (PA2PF4)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF5 key value (PA2PF5)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF6 key value (PA2PF6)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF7 key value (PA2PF7)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF8 key value (PA2PF8)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF9 key value (PA2PF9)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF10 key value (PA2PF10)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF11 key value (PA2PF11)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
PA2-PF12 key value (PA2PF12)
Each valid key or key sequence is a separate parameter which, except for restrictions as noted, can be assigned any function. If you do not specify a function for a particular key or key sequence, the function currently assigned to that key or key sequence remains the same.
The possible functions that can be assigned are:
- *HELP
- 5250 Help
- *HLP3270
- 3270 Help Text (Display Active Keyboard Map)
- *CLEAR
- Clear Screen
- Print Screen
- *DSPATR
- Display Imbedded Attributes
- *TEST
- Test Request
- *DOWN
- Roll Down
- *UP
- Roll Up
- *NONE
- No Assignment
- *RESET
- Error Reset
- *SYSREQ
- System Request
- *BCKSPC
- Record Backspace
- *ATTN
- Attention
- *F1-*F24
- F1 through F24 Function Keys
Restrictions:
*HELP, *HLP3270, and *RESET must be assigned to one of the following 12-key sets of function keys:
- PF1 through PF12
- PA1/PF1 through PF12
- PA2/PF1 through PF12
The *HELP, *HLP3270, and *RESET functions are required for 3270 display station device support to function properly. Since not all 3270 keyboards have 24 PF keys, *HELP, *HLP3270, or *RESET may not be assigned to keys PF13 through PF24, unless these functions are also assigned to one of the three sets listed above.
It is recommended that *F1 and *SYSREQ both also be assigned to one of the three sets.
The value *ATTN cannot be explicitly assigned to a 3270 remote attach display station. If the default value *ATTN is taken, the value *NONE is substituted. However, if the value *ATTN is explicitly chosen, a diagnostic message is sent.
Top |
Examples
CHGKBDMAP PF1(*F1) PA1PF1(*HELP)
This command would be entered if the user is generally satisfied with the keyboard mapping (either the default mapping or a user-defined mapping) except for one or two PF key assignments. No other PF key sequences are affected by this command. The above command could also be started in the program that started the application (thus tailoring the work station to whatever application is run).
Top |
Error messages
*ESCAPE Messages
- CPF8701
- Specified device &1 not a 3270 device type.
- CPF8702
- &1 function key not correctly defined.
- CPF8703
- Device &1 not ready.
Top |