Change HyperSwap Storage Desc (CHGHYSSTGD)
| Where allowed to run: All environments (*ALL) Threadsafe: No |
Parameters Examples Error messages |
The Change HyperSwap Storage Description command is used to change the defined association between a physical system and its preferred IBM System Storage device.
Restrictions:
- You must have input/output system configuration (*IOSYSCFG) special authority to use this command.
| Top |
Parameters
| Keyword | Description | Choices | Notes |
|---|---|---|---|
| SERIAL | System serial number | Character value | Required, Positional 1 |
| STGDEV | IBM System Storage device | Character value, *SAME | Optional, Positional 2 |
| Top |
System serial number (SERIAL)
Specifies the serial number of the system for the HyperSwap storage description.
This is a required parameter.
- character-value
- Specify the serial number of the system for the HyperSwap storage description.
| Top |
IBM System Storage device (STGDEV)
Specifies the name of the IBM System Storage device for the HyperSwap storage description.
This is a required parameter.
- *SAME
- The name of the IBM System Storage device does not change.
- character-value
- Specify the name of the IBM System Storage device for the HyperSwap storage description.
| Top |
Examples
Example 1: Changing a HyperSwap storage description
CHGHYSSTGD SERIAL(10AFC3R) STGDEV(IBM.2107-75TT345)
This command adds a HyperSwap storage description for the physical system with serial number 10AFC3R to the storage device IBM.2107-75TT345.
| Top |
Error messages
*ESCAPE Messages
- CPF9801
- Object &2 in library &3 not found.
- CPF9802
- Not authorized to object &2 in &3.
- HAE002B
- &1 command failed.
| Top |