You might want to move a disk unit from one auxiliary
storage pool (ASP) to another.
You want to create a user ASP for
journal receivers and move some of the disk units on your system to the new user
ASP. You can accomplish this in one process. When you move a disk
unit to an ASP that does not exist, the system creates the ASP.
You
might also decide to move disk units because you no longer need to have user
ASPs on your system and you want to move all the disk units back
to the system ASP.
Note: Disk units cannot be moved
to or from an independent auxiliary storage pool.
Restrictions
when changing your ASP configuration: Consider these things when you
are planning to move disk units from an ASP:
- The system might take a long time to move the disk unit because it must
copy the data from that disk unit to other disk units in the
ASP.
- You cannot move unit 1 (the load source unit) from
the system ASP.
- You cannot move disk units from a user ASP that is
overflowed.
- You cannot move disk units in and out of the same ASP in the same operation.
- When mirrored protection is active for an ASP, you
cannot move disk units in and out of the ASP. You must remove disk units in
pairs from a mirrored ASP. You can then add them to a different ASP.
- When mirrored protection is active for the ASP that
contains the disk units, you must remove both disk units of a mirrored pair.
- When you remove a disk unit, it becomes nonconfigured.
To move disk units between ASPs, follow these steps:
- If you are not already using dedicated service tools (DST), perform
a manual initial program load (IPL) to start DST.
- From the Use Dedicated Service Tools (DST) menu,
follow these steps:
- Select option 4 (Work with disk units).
- Select option 1 (Work with disk configuration) on the Work with
Disk Units display.
- Select option 3 (Work with ASP configuration) on the Work with
Disk Configuration display.
- Select option 6 (Move units from one ASP to another) from the Work
with ASP Configuration display. The Specify ASP to Move Disk Units
display is shown.
Specify ASP to Move Disk Units
To move units to different ASPs, specify the ASP that you want to move each
one to in the 'New ASP' field. Specify the units to be moved, press Enter.
New Current Serial --Protected-- --Unprotected--
ASP ASP Unit Number Type Model Size %Used Size %Used
1 0 0.00% 4124 41.50%
1 00-0193825 6602 030 0 0.00% 1031 82.00%
2 00-0163477 6602 030 0 0.00% 1031 29.00%
2 3 00-0190494 6602 030 0 0.00% 1031 27.00%
2 4 00-17900 6602 030 0 0.00% 1031 28.00%
- Type the number of the ASP you want to move the disk units to in
the New ASP column and press the Enter key. If you specify an
ASP that does not currently exist on your system, the system creates a new
ASP. If the move operation would leave the source ASP with insufficient storage,
you receive an error message.
If you see the Confirm Move of Unit display,
skip to step 6.
The Confirm Continuation
display is shown if the storage management directories are not usable:
Confirm Continuation
In order to proceed the system must perform internal processing that might
take several minutes during which the system might appear inactive. Press
Enter to continue. Press F12=Cancel to return and change your choice.
- Determine whether you want to cancel the procedure or continue. If you want to continue, press the Enter key.
- The Confirm Move of Unit display is shown:
Confirm Move of Unit
Moving units will take several minutes. Press Enter to confirm your
choice to move the units. Press F9=Capacity information to display the capacity.
Press F12=Cancel to return to change your choice.
Serial --Protected-- --Unprotected--
ASP Unit Number Type Model Size %Used Size %Used
1 0 0.00% 2062 83.00%
1 00-0193825 6602 030
2 00-0163477 6602 030
2 0 0.00% 2062 0.01%
3 00-0190494 6602 030
4 00-17900 6602 030
Press F9 (Capacity information)
to display the resulting capacity.
Resulting Capacity
The configuration change that you requested would result in the following
ASP capacities. Press Enter to continue.
-----------Current---------- ----------Propose-----------
--Protected-- -Unprotected- --Protected-- -Unprotected-
ASP Threshold Size %Used Size %Used Size %Used Size %Used
1 90% 0 0.00% 4124 41.50% 0 0.00% 2062 83.00%
2 90% 0 0.00% 2062 0.01%
- Press the Enter key to return to the Confirm Move of Unit display.
- Press the Enter key on the Confirm Move of Units
display to move the selected disk units. The system will move the
data off the selected disk units to the remaining disk units in the source
ASP. The move can take several minutes during which the system appears inactive.
- When the move operation is complete, you return to the Work with
ASP Configuration display.
- If you have no other tasks to perform, end DST.