Where allowed to run: All environments (*ALL) Threadsafe: No |
Parameters Examples Error messages |
The Create Line Description (TDLC) (CRTLINTDLC) command creates a line description for a twinaxial data link control line.
Restriction: You must have input/output system configuration (*IOSYSCFG) special authority to use this command.
Top |
Keyword | Description | Choices | Notes |
---|---|---|---|
LIND | Line description | Name | Required, Positional 1 |
WSC | Attached work station ctl | Name | Required, Positional 2 |
ONLINE | Online at IPL | *YES, *NO | Optional |
TEXT | Text 'description' | Character value, *BLANK | Optional |
NETCTL | Network controller | Name | Optional |
CTL | Attached nonswitched ctls | Values (up to 64 repetitions): Name | Optional |
AUT | Authority | Name, *CHANGE, *ALL, *USE, *EXCLUDE, *LIBCRTAUT | Optional |
Top |
Top |
Specifies the name of the work station controller to which the 5150 devices and other displays are attached.
Top |
Specifies whether this object is automatically varied on at initial program load (IPL).
Top |
Specifies text that briefly describes the line description.
Top |
Specifies the name of an existing network controller. This network controller is used to run TCP/IP over the connection.
Top |
Specifies, for nonswitched lines, the names of one or more controllers to which this line is attached. The controller descriptions must already exist.
You can enter multiple values for this parameter.
Top |
Specifies the authority you are giving to users who do not have specific authority for the object, who are not on an authorization list, and whose group profile or supplemental group profiles do not have specific authority for the object.
Top |
Example 1: Creating a TDLC Line Description
CRTLINTDLC LIND(WSFLINE) WSC(CTL01)
This command creates a TDLC line description named WSFLINE that is attached to work station controller CTL01.
Example 2: Creating a TDLC Line Description Associated with a Network Controller
CRTLINTDLC LIND(NETLINE) WSC(CTL01) NETCTL(NETC01)
This command creates a TDLC line description named NETLINE that is attached to work station controller CTL01, and NETC01 is used as network controller to run TCP/IP over the connection.
Top |
Top |