| 1 | Receiver variable | Output | Char(*) |
| 2 | Length of receiver variable | Input | Binary(4) |
| 3 | List information | Output | Char(80) |
| 4 | Section information | Output | Char(64) |
| 5 | Number of records to return | Input | Binary(4) |
| 6 | Format name | Input | Char(8) |
| 7 | Authorization list | Input | Char(10) |
| 8 | Error code | I/O | Char(*) |
The Retrieve Objects Secured by Authorization List (QGYRATLO) API provides a list of objects that are secured by an authorization list. This API provides information similar to the Display Authorization List Objects (DSPAUTLOBJ) command and the List Objects Secured by Authorization List (QSYLATLO) API.
The QGYRATLO API returns the same information that the List Objects Secured by Authorization List (QSYLATLO) API provides, but takes a complete snapshot at once and allows subsequent records to be obtained through the Get List Entries (QGYGTLE) API.
The receiver variable that receives the information requested. You can specify the size of the area to be smaller than the format requested as long as you specify the length parameter correctly. As a result, the API returns only the data that the area can hold.
The length of the receiver variable provided. The length of receiver variable parameter may be specified up to the size of the receiver variable specified in the user program. If the length of receiver variable parameter specified is larger than the allocated size of the receiver variable specified in the user program, the results are not predictable. For formats that contain variable length data, the receiver variable length must be large enough to hold the fixed portion of the record.
The variable that is used to return status information about the list of secured objects that were opened. See Format of List Information for a description of this parameter.
The variable that is used to return entry information about the list of secured objects that was opened. See Format of Section Information for a description of this parameter.
The number of records in the list to put into the receiver variable after the entire list has been built. If -1 is specified, then all the records will be returned.
The name of the format that is used to list objects secured by the authorization list.
You can specify these formats:
| ATLO0100 | Each entry contains the object name, library, type, authority holder indicator, auxiliary storage pool (ASP) device name of library, and ASP device name of object. |
| ATLO0110 | This format only returns path names for objects in a directory. Each entry contains the offset to the path name, the length of the path name, type, authority holder indicator, ASP device name of object, and the path name value. Objects in the QSYS and QDLS file systems are not returned with this format. |
| ATLO0200 | Each entry contains the same information as ATLO0100 plus the object owner, attribute, text, and primary group. |
| ATLO0210 | This format only returns path names for objects in a directory. Each entry contains the same information as format ATLO0110 plus the object owner, attribute, text, and primary group. Objects in the QSYS and QDLS file systems are not returned with this format. |
| ATLO0300 | Each entry contains the length of the entry, object name, library, type, authority holder indicator, document library object (DLO) name, the name of the folder that the DLO is in, the displacement to the path name, the length of the path name, ASP device name of library, ASP device name of object, and the path name value. Objects in all file systems will be returned with this format. |
| ATLO0400 | Each entry contains the same information as ATLO0300 plus the object owner, primary group, attribute, and text. Objects in all file systems are returned with this format. |
The name of the authorization list for which the secured objects are returned.
The structure in which to return error information. For the format of the structure, see Error code parameter.
The following tables describe the order and format of the data returned in the receiver variable. For detailed descriptions of the fields in the tables, see Field Descriptions.
| Offset | Type | Field | |
|---|---|---|---|
| Dec | Hex | ||
| 0 | 0 | BINARY(4) | Object name |
| 10 | 0A | CHAR(10) | Library name |
| 20 | 14 | CHAR(10) | Object type |
| 30 | 1E | CHAR(1) | Authority holder |
| 31 | 1F | CHAR(10) | ASP device name of library |
| 41 | 29 | CHAR(10) | ASP device name of object |
| Offset | Type | Field | |
|---|---|---|---|
| Dec | Hex | ||
| 0 | 0 | BINARY(4) | Offset to path name |
| 4 | 4 | BINARY(4) | Length of path name |
| 8 | 8 | CHAR(10) | Object type |
| 18 | 12 | CHAR(1) | Authority holder |
| 19 | 13 | CHAR(1) | Reserved |
| 20 | 14 | CHAR(10) | ASP device name of object |
| CHAR(*) | Path name | ||
| Offset | Type | Field | |
|---|---|---|---|
| Dec | Hex | ||
| 0 | 0 | BINARY(4) | Object name |
| 10 | 0A | CHAR(10) | Library name |
| 20 | 14 | CHAR(10) | Object type |
| 30 | 1E | CHAR(1) | Authority holder |
| 31 | 1F | CHAR(10) | Owner |
| 41 | 29 | CHAR(10) | Attribute |
| 51 | 33 | CHAR(50) | Text description |
| 101 | 65 | CHAR(10) | Primary group |
| 111 | 6F | CHAR(10) | ASP device name of library |
| 121 | 79 | CHAR(10) | ASP device name of object |
| Offset | Type | Field | |
|---|---|---|---|
| Dec | Hex | ||
| 0 | 0 | BINARY(4) | Offset to path name |
| 4 | 4 | BINARY(4) | Length of path name |
| 8 | 8 | CHAR(10) | Object type |
| 18 | 12 | CHAR(1) | Authority holder |
| 19 | 13 | CHAR(10) | Owner |
| 29 | 1D | CHAR(10) | Attribute |
| 39 | 27 | CHAR(50) | Text description |
| 89 | 59 | CHAR(10) | Primary group |
| 99 | 63 | CHAR(1) | Reserved |
| 100 | 64 | CHAR(10) | ASP device name of object |
| CHAR(*) | Path name | ||
| Offset | Type | Field | |
|---|---|---|---|
| Dec | Hex | ||
| 0 | 0 | BINARY(4) | Length of entry |
| 4 | 4 | CHAR(10) | Object name |
| 14 | 0E | CHAR(10) | Library name |
| 24 | 18 | CHAR(10) | Object type |
| 34 | 22 | CHAR(1) | Authority holder |
| 35 | 23 | CHAR(12) | DLO name |
| 47 | 2F | CHAR(63) | Folder name |
| 110 | 6E | CHAR(2) | Reserved |
| 112 | 70 | BINARY(4) | Displacement to path name |
| 116 | 74 | BINARY(4) | Length of path name |
| 120 | 78 | CHAR(10) | ASP device name of library |
| 130 | 82 | CHAR(10) | ASP device name of object |
| CHAR(*) | Path name | ||
| Offset | Type | Field | |
|---|---|---|---|
| Dec | Hex | ||
| 0 | 0 | BINARY(4) | Length of entry |
| 4 | 4 | CHAR(10) | Object name |
| 14 | 0E | CHAR(10) | Library name |
| 24 | 18 | CHAR(10) | Object type |
| 34 | 22 | CHAR(1) | Authority holder |
| 35 | 23 | CHAR(12) | DLO name |
| 47 | 2F | CHAR(63) | Folder name |
| 110 | 6E | CHAR(2) | Reserved |
| 112 | 70 | BINARY(4) | Displacement to path name |
| 116 | 74 | BINARY(4) | Length of path name |
| 120 | 78 | CHAR(10) | Owner |
| 130 | 82 | CHAR(10) | Attribute |
| 140 | 8C | CHAR(50) | Text description |
| 190 | BE | CHAR(10) | Primary group |
| 200 | C8 | CHAR(10) | ASP device name of library |
| 210 | D2 | CHAR(10) | ASP device name object |
| CHAR(*) | Path name | ||
ASP device name of library. The auxiliary storage pool (ASP) device name where the object's library is stored. If the object's library is in the system ASP or one of the basic user ASPs, this field contains *SYSBAS.
ASP device name of object. The auxiliary storage pool (ASP) device name where the object is stored. If the object is in the system ASP or one of the basic user ASPs, this field contains *SYSBAS.
Attribute. The attribute of the secured object. If the object is not in the QSYS or QDLS file system, this field is blank.
Authority holder. Whether the object is an authority holder. If the object is an authority holder, this field is Y. If not, this field is N.
Authorization list. The name of the authorization list for which the list of objects is returned.
Authorization list library name. The name of the library that contains the authorization list.
Displacement to path name. The displacement in the entry to the start of the path name. The displacement will be set to zero if the receiver variable is not large enough to hold the path name.
DLO name. The document library object (DLO) name for the object. If the object is not a *DOC (document) or *FLR (folder) object, this field is blank.
Folder name. The name of the folder that contains the DLO object. If the object is not in a folder, this field contains *NONE.
Length of entry. The length (in bytes) of the current entry.
Length of path name. The length (in bytes) of the path name.
Library name. The name of the library that contains the object.
Object name. The name of the object that is secured by the authorization list. If the object is not in the QSYS or QDLS file system, this field is blank.
Object type. The type of secured object.
Offset to path name. The offset in the receiver variable to the start of the path name. The offset will be set to zero if the receiver variable is not large enough to hold the path name.
Owner. The name of the owner of the authorization list or object.
Path name. The path name of the object that is secured by the authorization list. The user must request a format that supports path names if path names are to be included in the information that is returned in the receiver variable. The structure of the path name returned follows:
| Description | Type |
|---|---|
| CCSID of the returned path name | Binary(4) |
| Country or region ID | Char(2) |
| Language ID | Char(3) |
| Reserved field | Char(3) |
| Flag byte | Binary(4) |
| Number of bytes in the path name | Binary(4) |
| Path delimiter | Char(2) |
| Reserved field | Char(10) |
| Path name value | Char(*) |
Primary group. The name of the user who is the primary group for the authorization list or object. If there is no primary group for the authorization list or object, this field contains a value of *NONE.
Reserved. An ignored field.
Text description. The descriptive text for the secured object. If the object is not in the QSYS or QDLS file system, this field is blank.
| Offset | Type | Field | |
|---|---|---|---|
| Dec | Hex | ||
| 0 | 0 | BINARY(4) | Total records |
| 4 | 4 | BINARY(4) | Records returned |
| 8 | 8 | CHAR(4) | Request handle |
| 12 | C | BINARY(4) | Record length |
| 16 | 10 | CHAR(1) | Information complete indicator |
| 17 | 11 | CHAR(13) | Date and time created |
| 30 | 1E | CHAR(1) | List status indicator |
| 31 | 1F | CHAR(1) | Reserved |
| 32 | 20 | BINARY(4) | Length of information returned |
| 36 | 24 | BINARY(4) | First record in buffer |
| 40 | 28 | BINARY(4) | Reason code |
| 44 | 2C | CHAR(36) | Reserved |
Date and time created. The date and time when the list was created.
The 13 characters are:
| 0 | Century, where 0 indicates years 19xx and 1 indicates years 20xx. |
| 2-7 | The date, in YYMMDD (year, month, and day) format. |
| 8-13 | The time of day, in HHMMSS (hours, minutes, and seconds) format. |
First record in buffer. The number of the first record in the receiver variable.
Information complete indicator. Whether all requested
information has been supplied.
Possible values follow:
| I | Incomplete information. An interruption causes the list to contain incomplete information about a buffer or buffers. |
| P | Partial and accurate information. Partial information is returned when the maximum space was used and not all of the buffers requested were read. |
| C | Complete and accurate information. All the buffers requested are read and returned. |
Length of information returned. The size, in bytes, of the information that is returned in the receiver variable.
List status indicator. The status of building the list.
Possible values follow:
| 2 | The list has been completely built. |
Reason code. The reason code that further describes why the list is only a subset of all objects. The following values can be returned:
Record length. The length of each record of information returned. For variable length records, this value is set to zero. For variable length records you can obtain the length of individual records from the records themselves.
Records returned. The number of records returned in the receiver variable. This is the smallest of the following three values:
Request handle. The handle of the request that can be used for subsequent requests of information from the list. The handle is valid until the Close List (QGYCLST) API is called to close the list, or until the job ends.
Note: This field should be treated as a hexadecimal field. It should not be converted from one CCSID to another, for example, EBCDIC to ASCII, because doing so could result in an unusable value.
Reserved. An ignored field.
Total records. The total number of records available in the list.
| Offset | Type | Field | |
|---|---|---|---|
| Dec | Hex | ||
| 0 | 0 | BINARY(4) | Entry number of first QSYS.LIB object |
| 4 | 4 | BINARY(4) | Number of QSYS.LIB objects |
| 8 | 8 | BINARY(4) | Entry number of first QDLS object |
| 12 | 0C | BINARY(4) | Number of QDLS objects |
| 16 | 10 | BINARY(4) | Entry number of first directory object |
| 20 | 14 | BINARY(4) | Number of directory objects |
| 24 | 18 | CHAR(40) | Reserved |
Entry number of first directory object. The entry number of the first directory object (objects not in the QSYS.LIB or QDLS file system) that was returned in the receiver variable. This value is only set if you are using format ATLO0300 or ATLO0400. Otherwise, -1 is returned. If the number of directory objects field is 0, this value is also 0.
Entry number of first QDLS object. The entry number of the first QDLS object that was returned in the receiver variable. This value is only set if you are using format ATLO0300 or ATLO0400. Otherwise, -1 is returned. If the number of QDLS objects field is 0, this value is also 0.
Entry number of first QSYS.LIB object. The entry number of the first QSYS.LIB object that was returned in the receiver variable. This value is only set if you are using format ATLO0300 or ATLO0400. Otherwise, -1 is returned. If the number of QSYS.LIB objects field is 0, this value is also 0.
Number of directory objects. The number of objects in directories (objects not in the QSYS.LIB or QDLS file system) that were returned in the receiver variable. This value is only set if you are using format ATLO0300 or ATLO0400. Otherwise, -1 is returned. If there are no entries for objects in directories in the receiver variable, 0 is returned.
Number of QDLS objects. The number of objects in the QDLS file system that were returned in the receiver variable. This value is only set if you are using format ATLO0300 or ATLO0400. Otherwise, -1 is returned. If there are no entries for QDLS objects in the receiver variable, 0 is returned.
Number of QSYS.LIB objects. The number of objects in the QSYS.LIB file system that were returned in the receiver variable. This value is only set if you are using format ATLO0300 or ATLO0400. Otherwise, -1 is returned. If there are no entries for QSYS.LIB objects in the receiver variable, 0 is returned.
Reserved. An ignored field.
| Message ID | Error Message Text |
|---|---|
| CPF22AF E | Not authorized to authorization list &1. |
| CPF2283 E | Authorization list &1 does not exist. |
| CPF2289 E | Unable to allocate authorization list &1. |
| CPF3CAA E | List is too large for user space &1. |
| CPF3CF1 E | Error code parameter not valid. |
| CPF3C21 E | Format name &1 is not valid. |
| CPF3C3A E | Value for parameter &2 for API &1 not valid. |
| CPF3C36 E | Number of parameters, &1, entered for this API was not valid. |
| CPF3C90 E | Literal value cannot be changed. |
| CPF4ABC E | Internal error detected reason code &1. |
| CPF4AA9 E | Error occurred during processing of stream file. |
| CPF9801 E | Object &2 in library &3 not found. |
| CPF9802 E | Not authorized to object &2 in &3. |
| CPF9803 E | Cannot allocate object &2 in library &3. |
| CPF9807 E | One or more libraries in library list deleted. |
| CPF9808 E | Cannot allocate one or more libraries on library list. |
| CPF9810 E | Library &1 not found. |
| CPF9820 E | Not authorized to use library &1. |
| CPF9830 E | Cannot assign library &1. |
| CPF9838 E | User profile storage limit exceeded. |
| CPF9872 E | Program or service program &1 in library &2 ended. Reason code &3. |
[ Back to top | Security APIs | APIs by category ]