The Configuration and Management component manages several
configuration elements. This topic provides details of those configuration
elements.
/IBM/BusinessServices/EntitySuspectProcessing/collapsedEntitiesNumberLimit
- Description: Specifies the maximum number of A1 suspects
returned by the FindAllSuspectMatchRules external rule. If this value
is 0, this rule returns all A1 matches found.
- Default value: 15
- Dynamic: true
/IBM/BusinessServices/EntitySuspectProcessing/EntityLinkReasonType/collapse
- Description: Specifies the type code indicating that the
entity is linked to another entity because the entity was collapsed.
This value should be one of the LINK_REASON_TP_CD values in the CDLINKREASONTP
table.
- Default value: 1
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/EntityLinkReasonType/split
- Description: Specifies the type code indicating that the
entity is linked to another entity because the entity was split. This
value should be one of the LINK_REASON_TP_CD values in the CDLINKREASONTP
table.
- Default value: 2
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/EntityLinkReasonType/undocollapse
- Description: Specifies the type code indicating that the
cloned entity is linked to its original source entity after an undo
collapse operation. This value should be one of the LINK_REASON_TP_CD
values in the CDLINKREASONTP table.
- Default value: 3
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/InactiveReasonType/collapse
- Description: Specifies the type code indicating that the
entity is inactive because the entity was collapsed. This value should
be one of the INACT_REASON_TP_CD values in the CDINACTREASONTP table.
- Default value: 1
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/InactiveReasonType/split
- Description: Specifies the type code indicating that the
entity is inactive because the entity was split. This value should
be one of the INACT_REASON_TP_CD values in the CDINACTREASONTP table.
- Default value: 2
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/ProcessingDepth/LinkDepthNumberLimit
- Description: Specifies the maximum number of times to retrieve
products recursively in the getLinkedProducts transaction.
- Default value: 15
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectReasonType/systemMarked
- Description: Specifies the type code indicating that the
suspect is marked by the system. This value should be one of the SUSP_SOURCE_TP_CD
values in the CDSUSPECTSOURCETP table.
- Default value: 2
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectReasonType/userMarked
- Description: Specifies the type code indicating that the
suspect is marked by a user. This value should be one of the SUSP_SOURCE_TP_CDvalues
in the CDSUSPECTSOURCETP table.
- Default value: 1
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectStatusType/criticalChangeResolved
- Description: Specifies the type code indicating that the
suspect was investigated, and the critical data change was resolved.
This value should be one of the SUSP_ST_TP_CD values in the CDSUSPECTSTATUSTP
table.
- Default value: 25
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectStatusType/duplicateEntity
- Description: Specifies the type code indicating that the
suspect was investigated, and the entities are duplicates. This value
should be one of the SUSP_ST_TP_CD values in the CDSUSPECTSTATUSTP
table.
- Default value: 24
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectStatusType/duplicateEntityDoNotCollapse
- Description: Specifies the type code indicating that the
suspect is under investigation, the entities are suspected duplicates,
and should not be collapsed. This value should be one of the SUSP_ST_TP_CD
values in the CDSUSPECTSTATUSTP table.
- Default value: 26
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectStatusType/notDuplicate
- Description: Specifies the type code indicating that the
suspect was investigated, and the entities are not duplicates. This
value should be one of the SUSP_ST_TP_CD values in the CDSUSPECTSTATUSTP
table.
- Default value: 23
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectStatusType/pending
- Description: Specifies the type code indicating that the
suspect is under investigation, and the critical data change for the
entity is pending. This value should be one of the SUSP_ST_TP_CD values
in the CDSUSPECTSTATUSTP table.
- Default value: 22
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectStatusType/suspectDuplicate
- Description: Specifies the type code indicating that the
suspect is under investigation, and the entity and the suspect are
duplicates. This value should be one of the SUSP_ST_TP_CD values in
the CDSUSPECTSTATUSTP table.
- Default value: 21
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectType/closeMatch
- Description: Specifies the type code indicating the close
match suspect. This value should be one of the SUSPECT_TP_CD values
in the CDSUSPECTTP table.
- Default value: 12
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectType/exactMatch
- Description: The type code indicating the exact match suspect.
This value should be one of the SUSPECT_TP_CD values in the CDSUSPECTTP
table.
- Default value: 11
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectType/notMatch
- Description: Specifies the type code indicating suspects
do not match. This value should be one of the SUSPECT_TP_CD values
in the CDSUSPECTTP table.
- Default value: 14
- Dynamic: false
/IBM/BusinessServices/EntitySuspectProcessing/SuspectType/possibleMatch
- Description: The type code indicating the possible match
suspect. This value should be one of the SUSPECT_TP_CD values in the
CDSUSPECTTP table.
- Default value: 13
- Dynamic: false
/IBM/CoreUtilities/DateValidation/dateFormat
/IBM/CoreUtilities/DateValidation/dateSeparator
- Description: Specifies the separator used to separate the
year, month, and day in a date format. The separator can be one of
the following characters:
- Default value: A hyphen ( - )
- Dynamic: false
/IBM/CoreUtilities/EventManager/busiEntities
- Description: Specifies the business entities that Event Manager monitors.
This value corresponds to a list of comma delimited GROUP_NAME values
in the V_GROUP table. By default, it is empty.
- Default value: blank (that is, a blank value).
- Dynamic: false
/IBM/CoreUtilities/EventManager/businessSystemId
- Description: Specifies the system that Event Manager monitors.
This value corresponds to a DWL_PROD_TP_CD value in the CDDWLPRODUCTTP
table.
- Default value: 1
- Dynamic: false
/IBM/CoreUtilities/EventManager/businessSystemId
- Description: Specifies the system that Event Manager monitors.
This value corresponds to a DWL_PROD_TP_CD value in the CDDWLPRODUCTTP
table.
- Default value: 1
- Dynamic: false
/IBM/CoreUtilities/EventManager/EventCategoryForBusiEntities
- Description: Species the event categories for the business
entities that Event Manager monitors. This value corresponds to a
list of comma delimited EVENT_CAT_CD values in the CDEVENTCAT table.
By default, it is empty.
- Default value: A blank (that is, a blank value).
- Dynamic: false
/IBM/CoreUtilities/KeyGeneration/instancePKIdentifier
- Description: Specifies a numeric value that can be appended
to each generated ID. This provides a way to generate IDs for database
clustering and replication. To enable this feature, each instance
of this configuration element should have a unique numeric value.
- Default value: A blank (that is, a blank value).
- Dynamic: false
/IBM/CoreUtilities/Response/OrderSort/enabled
This
configuration element is not supported.
/IBM/CoreUtilities/SynchronizeTransactionTime/enabled
- Description: Determines whether all sub-transactions in
a transaction use the same transaction time. This configuration element
only applies to entity beans.
- Default value: false
- Dynamic: false
/IBM/DWLAdminServices/InternalValidation/enabled
- Description: Determines whether or not internal date values
in DWLAdminService requests are validated.
- Default value: true
- Dynamic: false
/IBM/DWLAdminServices/Response/dtd
- Description: Specifies the schema against which DWLAdminService
responses are validated.
- Default value: MDMCommon.xsd
- Dynamic: false
/IBM/DWLAdminServices/Response/xsd
- Description: Specifies the schema against which DWLAdminService
responses are validated.
- Default value: MDMCommon.xsd
- Dynamic: false
/IBM/DWLBusinessServices/Category/Search/maxResults
- Description: Specifies the maximum number of records returned
from a searchCategory and searchCategoryHierarchy transaction.
- Default value: 100
- Dynamic: true
/IBM/DWLBusinessServices/Task/priorityCatType
- Description: Specifies the type code indicating the priority
category type that is used in Task Management. This value should be
one of the PRIORITY_CAT_TP_CD values in the CDPRIORITYTP table.
- Default value: 1
- Dynamic: true
/IBM/DWLBusinessServices/Task/Search/maxResults
- Description: Specifies the maximum number of records returned
from a searchTask transaction.
- Default value: 100
- Dynamic: true
/IBM/DWLBusinessServices/TaskChain/Search/maxResults
- Description: Specifies the maximum number of records returned
from a searchTaskChain transaction.
- Default value: 100
- Dynamic: true
/IBM/DWLBusinessServices/TaskChain/Search/sortOrder
- Description: Specifies a comma delimited string that lists
the attributes in TaskChainSearchResultBObj object, in the order in
which the TaskChainSearchResultBObj records are returned in a searchTaskChain
transaction..
- Default value: DueDate, Name, ProcessId
- Dynamic: true
/IBM/DWLBusinessServices/Task/Search/sortOrder
- Description: Specifies a comma delimited string listing
the attributes in the TaskSearchResultBObj object, in the order in
which the TaskSearchResultBObj records are returned in a searchTask
transaction.
- Default value: DueDate, Priority, CreationDate
- Dynamic: true
/IBM/DWLBusinessServices/WorkbasketEntity/Search/maxResults
- Description: Specifies the maximum number of WorkbasketEntityBObj
records in each TaskBObj object that is returned as part of each TaskSearchResultBObj
record in a searchTask transaction.
- Default value: 100
- Dynamic: true
/IBM/DWLCommonServices/AccessToken/AccessTokenAccessor/className
- Description: Specifies the class used to retrieve the collection
of access tokens associated with users and groups. The class must
implement the com.dwl.base.accessToken.AccessTokenAccessor interface.
- Default value: com.dwl.base.accessToken.DefaultAccessTokenAccessor
- Dynamic: true
/IBM/DWLCommonServices/BaseTableExtension/updateCheckIgnoreList
/IBM/DWLCommonServices/ConcurrentExecution/defaultWaitTimeout
- Description: Specifies the time, in milliseconds, that
a concurrent execution waits until all work items are completed. Set
a value to avoid waiting indefinitely in case of an issue such as
a deadlock.
- Default value: 3600000
- Dynamic: false
/IBM/DWLCommonServices/ConcurrentExecution/enabled
- Description: Determines whether concurrent execution infrastructure
is enabled. The product provides several several components that can
be executed concurrently when this configuration element is enabled.
Examples of these components are as follows:
- Searching for party addresses under a parent object
- Searching for party identification under a parent object
- Transactions that are supported by the federated deployment framework
- Default value: false
- Dynamic: false
/IBM/DWLCommonServices/ConcurrentExecution/Cache/purgeFrequency
- Description: Specifies the time interval, in milliseconds,
between two consecutive cache purges.
- Default value: 604800000
- Dynamic: false
/IBM/DWLCommonServices/ConcurrentExecution/Cache/timeToLive
- Description: Specifies the time, in milliseconds, after
which a cached work item is removed from the cache.
- Default value: 604800000
- Dynamic: false
/IBM/DWLCommonServices/DataBase/OS
- Description: Specifies the operating system of the database
server.
- Default value: This value is set upon installation of the
operating system.
- Dynamic: false
/IBM/DWLCommonServices/DataBase/type
- Description: Specifies the supported database product name.
Supported databases are DB2® and
Oracle.
- Default value: This value is set upon installation of the
database.
- Dynamic: false
/IBM/DWLCommonServices/DataBase/TimeStampPrecisionIndicator/enabled
- Description: Determines whether the nanosecond part of
a timestamp is set to 0 to match the database timestamp precision.
- Default value: false
- Dynamic: false
/IBM/DWLCommonServices/DateValidation/dateFormat
/IBM/DWLCommonServices/DateValidation/dateSeparator
- Description: Specifies the separator used to separate the
year, month, and day in a date format. The separator can be one of
the following characters:
- Default value: A hyphen ( - )
- Dynamic: false
/IBM/DWLCommonServices/EndDate/SystemCurrentTimeStamp/enabled
- Description: Specifies the start and end date timestamp
behavior in transactions that specify timestamps when the provided
input date is the current date.
- When the value is true, the timestamp is set
to the current time, overriding any time information provided in the
input.
- When the value is false, the timestamp is set
to the time provided in the input, regardless of the current system
time.
- Default value: true
- Dynamic: false
/IBM/DWLCommonServices/EntitySpecUse/SpecCascadeType
- Description: Specifies the spec cascade type code value
used in EntitySpecUseBObj to indicate whether the EntitySpecUseBObj
can be inherited by the descendents of the category. It is used in
recursive SQL scripts to return the EntitySpecUseBObj objects from
ancestors.
- Default value: 1
- Dynamic: false
/IBM/DWLCommonServices/EntitySpecUse/CategoryHierarchy/RecursiveSQL/Limit
/IBM/DWLCommonServices/ErrorHandling/retryErrorCodeList
- Description: Stores comma-separated error codes to be compared
against the InfoSphere® MDM error
reason codes to determine whether to retry failed inbound requests
(true) or not (false).
- Default value: [blank]
- Dynamic: true
/IBM/DWLCommonServices/ErrorHandling/retryErrorStringList
- Description: Stores comma-separated error strings that
will be searched within error messages to determine whether to retry
failed inbound requests (true) or not (false).
The
default value holds the deadlock error code strings for DB2 and Oracle databases.
Note: This configuration
parameter is used by the Messaging Adapter feature.
- Default value:
SQLCODE=-911,SQLCODE=-913,ORA-00370,ORA-02049,ORA-00060
- Dynamic: true
/IBM/DWLCommonServices/ExtensionFramework/enabled
- Description: Determines whether the extension framework
is enabled.
- Default value: true
- Dynamic: true
/IBM/DWLCommonServices/FastTrack/constructor
- Description: Specifies the value corresponding to the Constructor
value of the context argument for the DWLServiceController class.
- Default value: TCRMService
- Dynamic: false
/IBM/DWLCommonServices/FastTrack/targetApplication
- Description: Specifies the value corresponding to the TargetApplication
value of the context argument for the DWLServiceController class.
- Default value: tcrm
- Dynamic: false
/IBM/DWLCommonServices/FastTrack/Request/encoding
- Description: Specifies the encoding of the request message.
Before sending String request as byte stream, MDM Query Connect converts
the String to bytes using this encoding.
- Default value: UTF-16BE
- Dynamic: false
/IBM/DWLCommonServices/FastTrack/Response/encoding
- Description: Specifies the encoding of the response message.
- Default value: UTF-16BE
- Dynamic: false
/IBM/DWLCommonServices/FastTrack/Response/maxMessageChunk
/IBM/DWLCommonServices/FastTrack/Response/type
- Description: Specifies the value corresponding to the ResponseType
value of the context argument for the DWLServiceController class.
- Default value: standard
- Dynamic: false
/IBM/DWLCommonServices/FastTrack/Response/Size/enabled
- Description: Determines whether the response is split into
smaller chunks of data. Each chunk of data has a 12 character header
containing the following information:
- First character is an end of message indicator. If it is N, more
message chunks will follow; if it is Y, it is the last chunk.
- Next three characters contain the chunk order number (for example,
001)
- Next eight characters contain the message size in bytes (for example,
00005000 if the message size is 5000 bytes).
- Default value: true
- Dynamic: false
/IBM/DWLCommonServices/FastTrack/SetJmsMessageId/enabled
- Description: Determines whether the response message ID
is set to the value of request message ID.
- Default value: true
- Dynamic: false
/IBM/DWLCommonServices/IDGeneration/AlphaIDGenerator/className
- Description: Specifies the class of an ID generator that
generates an alpha ID.
- Default value: com.dwl.base.util.AlphaIDGenerator
- Dynamic: true
/IBM/DWLCommonServices/IDGeneration/AlphaNumericIDGenerator/className
- Description: Specifies the class of an ID generator that
generates an alphanumeric ID.
- Default value: com.dwl.base.util.AlphaNumericIDGenerator
- Dynamic: true
/IBM/DWLCommonServices/IDGeneration/NumericIDGenerator/className
- Description: Specifies the class of an ID generator that
generates a numeric ID.
- Default value: com.dwl.base.util.NumericIDGenerator
- Dynamic: true
/IBM/DWLCommonServices/IDGeneration/NumericStringIDGenerator/className
- Description: Specifies the class of an ID generator that
generates a numeric string ID.
- Default value: com.dwl.base.util.NumericStringIDGenerator
- Dynamic: true
/IBM/DWLCommonServices/InternalValidation/enabled
- Description: Determines whether internal validation is
enabled.
- Default value: true
- Dynamic: true
/IBM/DWLCommonServices/Jndi/contextFactory
- Description: Specifies the JNDI context factory class.
If this value is not specified, the JNDI context factory class provided
by the application server is used.
- Default value: A blank (that is, a blank value).
- Dynamic: false
/IBM/DWLCommonServices/KeyGeneration/defaultFormat
- Description: Specifies the default format used to generate
the primary keys. This provides a flexible way to generate IDs for
the purpose of database clustering and partitioning. This configuration
can hold a concatenated string of the predefined indicators along
with their desired length. These indicators are I, T, S and R representing
(I)nstanceNumber, (T)imestamp, (S)erviceIdentifier, (R)ecordIdentifier.
- Default value: S2R2T12I2
- Dynamic: true
/IBM/DWLCommonServices/KeyGeneration/instancePKIdentifier
- Description: Specifies a numeric value that can be appended
to each generated ID. To enable this, each instance of this configuration
element should have a unique numeric value.
- Default value: A blank (that is, a blank value).
- Dynamic: false
/IBM/DWLCommonServices/LdapSecurityProvider/LdapSearch/base
- Description: Specifies the base object at which to start
the search. This configuration element only applies if the value of
the /IBM/DWLCommonServices/Security/transaction_authorization_provider_class_name_1
configuration element is com.dwl.base.security.provider.LdapTransactionAuthorizationProvider.
- Default value: Airius.com
- Dynamic: false
/IBM/DWLCommonServices/LdapSecurityProvider/LdapSearch/jndiFactoryClass
- Description: Specifies the JNDI factory class to look up
the LDAP server. This configuration element only applies if the value
of the /IBM/DWLCommonServices/Security/transaction_authorization_provider_class_name_1
configuration element is com.dwl.base.security.provider.LdapTransactionAuthorizationProvider.
- Default value: com.sun.jndi.ldap.LdapCtxFactory
- Dynamic: false
/IBM/DWLCommonServices/LdapSecurityProvider/LdapSearch/jndiProviderUrl
- Description: Specifies the URL pointing to the LDAP server.
This configuration element only applies if the value of the /IBM/DWLCommonServices/Security/transaction_authorization_provider_class_name_1
configuration element is com.dwl.base.security.provider.LdapTransactionAuthorizationProvider.
- Default value: ldap://localhost
- Dynamic: false
/IBM/DWLCommonServices/LdapSecurityProvider/LdapSearch/Filter/group
- Description: Specifies the search filter to apply to an
LDAP server to search for transactions authorized for the group (user
role). This configuration element only applies if the value of the
/IBM/DWLCommonServices/Security/transaction_authorization_provider_class_name_1
configuration element is com.dwl.base.security.provider.LdapTransactionAuthorizationProvider.
- Default value: (&(objectClass=groupofuniquenames)(cn=%t)(uniquemember=cn=%g,*))
- Dynamic: false
/IBM/DWLCommonServices/LdapSecurityProvider/LdapSearch/Filter/user
- Description: Specifies the search filter to apply to an
LDAP server to search for transactions authorized for the user. This
configuration element only applies if the value of the /IBM/DWLCommonServices/Security/transaction_authorization_provider_class_name_1
configuration element is com.dwl.base.security.provider.LdapTransactionAuthorizationProvider.
- Default value: (&(objectClass=groupofuniquenames)(cn=%t)(uniquemember=uid=%u,*))
- Dynamic: false
/IBM/DWLCommonServices/Locale/languageId
- Description: Specifies the default language ID for the
application. This language ID is used to look up code table values.
- Default value: 100
- Dynamic: false
/IBM/DWLCommonServices/MultiTimeZoneDeployment/defaultTimeZone
- Description: Specifies the default time zone to use to
convert date values from common time zone (UTC) format if no requesterTimeZone
is specified in a request.
- Default value: A blank (that is, a blank value).
- Dynamic: false
/IBM/DWLCommonServices/MultiTimeZoneDeployment/enabled
- Description: Determines whether multi-timezone deployment
is enabled. When multi-timezone deployment is enabled, date values
will be stored in the database using common time zone (UTC) format.
- Default value: false
- Dynamic: false
/IBM/DWLCommonServices/NLS/system_Default_Data_Locale
- Description: Specifies the default locale used for spec
values NLS objects.
- Default value: en
- Dynamic: false
/IBM/DWLCommonServices/Notifications/defaultLanguage
- Description: Specifies the language ID used in notification.
For example, this language ID is used to look up code table values
in a particular language if code tables are used in the notification
message. The language ID corresponds to the LANG_TP_CD value in the
CDLANGTP table.
- Default value: 100
- Dynamic: true
/IBM/DWLCommonServices/Notifications/enabled
- Description: Determines whether notification is enabled
at the application level.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/Notifications/ExplicitCommit/enabled
- Description: Controls how notifications are sent to multiple
topics in a single-phase commit (XA disabled) and two-phase commit
(XA enabled). If the transaction is XA enabled, set this value to
false. If the transaction is XA disabled, set this value to true so
that a notification can be sent to more than one topic.
- Default value: false
- Dynamic: false
/IBM/DWLCommonServices/Notifications/NotificationManagerThrowException/enabled
- Description: Determines whether the Notification component
throws exceptions if errors occur upon initializing the component.
Typically, such errors occur if the notification metadata is not configured
correctly.
- Default value: false
- Dynamic: false
/IBM/DWLCommonServices/PerformanceTracking/enabled
- Description: Determines whether performance tracking is
enabled.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/level
- Description: Specifies the level of performance statistics
to track.
- Default value: 0
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ComponentLayer/enabled
- Description: Determines whether performance tracking is
enabled at the component level.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ComponentLayerExtension/enabled
- Description: Determines whether performance tracking is
enabled at the component level extension.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ComponentLayerPrePost/enabled
- Description: Determines whether performance tracking is
enabled at the component level pre or post processing.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ControllerLayer/enabled
- Description: Determines whether performance tracking is
enabled at the controller level.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ControllerLayerExtension/enabled
- Description: Determines whether performance tracking is
enabled at the controller level extension.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ControllerLayerPrePost/enabled
- Description: Determines whether performance tracking is
enabled at the controller level pre/post processing.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/DatabaseDetails/enabled
- Description: Determines whether performance tracking is
enabled at the database connection level.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/DatabaseQuery/enabled
- Description: Determines whether performance tracking is
enabled at the database query.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ExecuteTx/enabled
- Description: Determines whether performance tracking is
enabled at the business proxy.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ExternalBusinessRules/enabled
- Description: Determines whether performance tracking is
enabled at the external business rule component.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ExternalValidation/enabled
- Description: Determines whether performance tracking is
enabled at the external validation component.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/InternalValidation/enabled
- Description: Determines whether performance tracking is
enabled at the internal validation component.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/Notification/enabled
- Description: Determines whether performance tracking is
enabled at the notification component.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/PartyMatcher/enabled
- Description: Determines whether performance tracking is
enabled at the party matching component.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/RequestHandler/enabled
- Description: Determines whether performance tracking is
enabled at the request handler.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/RequestParser/enabled
- Description: Determines whether performance tracking is
enabled at the request parser.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ResponseConstructor/enabled
- Description: Determines whether performance tracking is
enabled at the response constructor.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/SecurityAuthorization/enabled
- Description: Determines whether performance tracking is
enabled at the security authorization component.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/Standardization/enabled
- Description: Determines whether performance tracking is
enabled at the standardization component.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/SuspectProcessing/enabled
- Description: Determines whether performance tracking is
enabled at the suspect processing.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/ThirdPartyExtension/enabled
- Description: Determines whether performance tracking is
enabled at the third party extension.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PerformanceTracking/TransactionManager/enabled
- Description: Determines whether performance tracking is
enabled at the business transaction manager.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/PhoneticSearch/extensionElementId
- Description: Specifies the extensionElementId parameter
used by the PhoneticKeyManager class to obtain specified PhoneticKeyGenerator
implementation.
- Default value: SoundexExtension
- Dynamic: true
/IBM/DWLCommonServices/PhoneticSearch/extensionId
- Description: Specifies the extensionId parameter used by
the PhoneticKeyManager class to get specified PhoneticKeyGenerator
implementation.
- Default value: com.ibm.imc.phonetics.PhoneticKeyProviders
- Dynamic: true
/IBM/DWLCommonServices/RedundantUpdate/enabled
/IBM/DWLCommonServices/Report/Broadcaster/enabled
- Description: Determines whether service activity monitoring
is enabled. If it is enabled, JMX notification is issued for each
transaction.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/Report/Listener/enabled
- Description: Determines whether transaction activity data
is logged in a log file. This configuration element is applicable
only if service activity monitoring is enabled.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/Response/UseMetadataOrder/enabled
This
configuration element is not supported.
/IBM/DWLCommonServices/Runtime/application
- Description: Specifies the run time of the InfoSphere MDM instance.
Possible values are WCC and FastTrack.
- Default value: WCC
- Dynamic: false
/IBM/DWLCommonServices/Search/caseSensitive
- Description: Determines whether searches are case sensitive.
When searches are not case sensitive, additional table columns and
indexes will be used to store non case sensitive values.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/Security/enabled
- Description: Determines whether security is enabled.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/Security/number_of_transaction_authorization_providers
- Description: Specifies the number of transaction authorization
providers.
- Default value: 1
- Dynamic: true
/IBM/DWLCommonServices/Security/SAML/SAML_userRoles_Attribute_AttributeName
- Description: Specifies the element in the SAML input indicating
the userRoles attribute name.
- Default value: urn:wcc:dir:attribute-def:userRoles
- Dynamic: true
/IBM/DWLCommonServices/Security/SAML/SAML_userRoles_Attribute_AttributeNamespace
- Description: Specifies the element in the SAML input indicating
the userRoles attribute namespace.
- Default value: urn:wcc:attributeNamespace:uri
- Dynamic: true
/IBM/DWLCommonServices/Security/SAML/security_data_parser
- Description: Specifies the class of a customized authentication
assertions parser. The assertions must be passed as the <authData>
element of the DWLContol group within a request. The class must implement
the com.dwl.base.ISecurityDataParser interface.
- Default value: com.dwl.base.SAML11Parser
- Dynamic: true
/IBM/DWLCommonServices/Security/SAML/SAML_XML_Validation/enabled
- Description: Determines whether the SAML XML is validated.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/Security/transaction_authorization_provider_class_name_1
- Description: Specifies the class of the transaction authorization
provider. The class must implement the com.dwl.base.security.AuthorizationProvider
interface.
- Default value: com.dwl.base.security.provider.DefaultTransactionAuthorizationProvider
- Dynamic: true
/IBM/DWLCommonServices/SpecValueSearch/DefaultStatus
- Description: Specifies the initial index status of searchable
spec attribute.
- Default value: 1
- Dynamic: true
/IBM/DWLCommonServices/SpecValueSearch/IndexTable/MaintainValues/enabled
- Description: Determines whether index value maintenance
is enabled.
- Default value: true
- Dynamic: true
/IBM/DWLCommonServices/SpecValueSearch/IndexTable/ScheduleSpecValueIndexProcess/ImpactedSpecValueSize/medium
- Description: Determines spec value indexing strategy based
on impacted spec value size.
- Default value: 10000
- Dynamic: true
/IBM/DWLCommonServices/SpecValueSearch/IndexTable/ScheduleSpecValueIndexProcess/ImpactedSpecValueSize/small
- Description: Determines spec value indexing strategy based
on impacted spec value size.
- Default value: 500
- Dynamic: true
/IBM/DWLCommonServices/SpecValueSearch/MaxDecimalFractionDigitsSize
- Description: Specifies the scaled value size of the DECIMAL_VALUE
column in the PRODUCTVALINDEX table. If the scaled value size of a
searchable attribute of decimal data type is greater than that of
the column, the value will not to be stored in system.
- Default value: 19
- Dynamic: true
/IBM/DWLCommonServices/SpecValueSearch/MaxDecimalTotalDigitsSize
- Description: Specifies the non-scaled value size of the
DECIMAL_VALUE column in the PRODUCTVALINDEX table. If the non-scaled
value size of a searchable attribute of decimal data type is greater
than that of the column, the value will not to be stored in system.
- Default value: 31
- Dynamic: true
/IBM/DWLCommonServices/SpecValueSearch/MaxLongTotalDigitsSize
- Description: Specifies the scaled value size of the LONG_VALUE
column in the PRODUCTVALINDEX table. If the scaled value size of a
searchable attribute of long data type is greater than that of the
column, the searchable attribute value will not to be stored in system.
- Default value: 19
- Dynamic: true
/IBM/DWLCommonServices/SpecValueSearch/MaxStringValueSize
- Description: Specifies the size of the STRING_VALUE column
in the PRODUCTVALINDEX table. If the size of a searchable attribute
of string data type is greater than that of the column, the searchable
attribute value will be truncated to be stored in system.
- Default value: 255
- Dynamic: true
/IBM/DWLCommonServices/SpecValueSearch/Recursive/enabled
- Description: Determines whether recursive SQL is used internally
to search for spec values.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/Standardization/enabled
- Description: Determines whether standardization is enabled.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/Standardization/StandardizationManager/className
- Description: Specifies the fully qualified name of the
standardization manager class. This class gets the standardizers from
the metadata based on business objects passed in and invokes the corresponding
standardizers.
- Default value: com.ibm.mdm.common.standardization.DefaultStandardizationManager
- Dynamic: true
/IBM/DWLCommonServices/SynchronizeTransactionTime/enabled
- Description: Determines whether the timestamps of the transaction
and all its sub-transactions are synchronized.
- Default value: false
- Dynamic: false
/IBM/DWLCommonServices/TAIL/enabled
- Description: Determines whether TAIL is enabled.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/TAIL/maxRecords
- Description: Specifies the maximum number of records returned
from a getTAIL transaction.
- Default value: 100
- Dynamic: true
/IBM/DWLCommonServices/TAIL/Asynchronous/enabled
- Description: Determines whether TAIL is logged asynchronously
from the transaction context of an InfoSphere MDM transaction.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/TAIL/RedundantUpdate/enabled
- Description: Determines whether TAIL is logged for update
transactions that contain redundant update data.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/UserManagement/user_management_provider_class_name
- Description: Specifies the class of user management provider
used. The class must implement the com.ibm.mdm.usermanagement.AuthorizationProvider
interface.
- Default value: com.ibm.mdm.usermanagement.DefaultUserManagementProvider
- Dynamic: false
/IBM/DWLCommonServices/Validation/BusinessKeyValidation/ExcludeList/groupNames
- Description: Specifies acomma delimited string listing
the group names for which validation using the business key validator
class is disabled.
- Default value: ContractRoleLocationPrivPref,
Address, ContactMethod, FinancialProfile, IncomeSource, OrganizationName,
PartyAddressPrivPref, PartyContactMethodPrivPref, PartyLobRelationship,
PartyLocationPrivPref, PartyPrivPref, PartyAddressPrivPref, PartyContactMethodPrivPref,
AccessDateValue, AdminContEquiv, EntityInstancePrivPref, ProductSpecValueBObj
- Dynamic: true
/IBM/DWLCommonServices/Validation/BusinessKeyValidation/Validator/className
- Description: The fully qualified name of the generic business
key validator class.
- Default value: com.ibm.mdm.common.validator.MDMBusinessKeyValidator
- Dynamic: false
/IBM/DWLCommonServices/Validation/External/enabled
- Description: Determines whether external validation is
enabled.
- Default value: true
- Dynamic: true
/IBM/DWLCommonServices/XML/Character_only_tags
- Description: Specifies a comma delimited string indicating
the XML elements whose values are enclosed by a CDATA XML element
in an XML response.
- Default value: authData
- Dynamic: true
/IBM/DWLCommonServices/XML/useValidatingParser
- Description: Determines whether XML request is validated
against its corresponding XML schema.
- Default value: true
- Dynamic: true
/IBM/DWLCommonServices/XmlRequestParse/UseGrammaPool/enabled
- Description: Determines whether grammar-pooling is enabled
for the XML request parser.
- Default value: true
- Dynamic: false
/IBM/EventManager/Integration/WebSphereMQ/MQEnvironment/channel
/IBM/EventManager/Integration/WebSphereMQ/MQEnvironment/hostName
/IBM/EventManager/Integration/WebSphereMQ/MQEnvironment/port
/IBM/EventManager/Integration/WebSphereMQ/MQQueue/name
/IBM/EventManager/Integration/WebSphereMQ/MQQueueManager/name
/IBM/EventManager/MemoryCache/timeToLive
- Description: Specifies the time, in milliseconds, for which Event Manager database
configurations are cached. After this time expires, the database configurations
are reloaded. If this value is 0, the configurations are kept in cache
until the server is stopped.
- Default value: 200000
- Dynamic: false
/IBM/EventManager/MessageSender/queue
- Description: Specifies the resource environment reference
name defined in the deployment descriptor corresponding to the queue
used by Event Manager.
- Default value: jms/EMQueue
- Dynamic: false
/IBM/EventManager/MessageSender/queueConnectionFactory
- Description: Specifies the resource reference name defined
in the deployment descriptor corresponding to the queue connection
factory used by Event Manager.
- Default value: jms/EMQCF
- Dynamic: false
/IBM/EventManager/MessagesInQueue/max
- Description: Specifies the maximum number of PROCESSACTION
records to select to create tasks per cycle in time-based event detection.
The configuration element only applies if you use the com.dwl.commoncomponents.eventmanager.client.ProcessControllerProxy
class to start time-based event detection.
- Default value: 500
- Dynamic: false
/IBM/EventManager/Notification/topic
- Description: Specifies the resource environment reference
name defined in the deployment descriptor corresponding to the topic
to which Event Manager notifications
are posted. If you want to route notifications to another topic, you
can set the new topic name in this configuration element, add the
new resource environment reference name in the deployment descriptor,
and configure the new topic in the InfoSphere MDM notification
data model.
- Default value: jms/EMTopic
- Dynamic: false
/IBM/EventManager/ProcessTime/max
- Description: Specifies the maximum processing time, in
milliseconds, that a task can stay in progress. Event Manager uses
this time to retry a task that has been in progress for too long. Event Manager creates
tasks using the following criteria:
- It tries to select PROCESSACTION records that have the EVENT_STATUS
with a value of 3 and changes the value to 2, marking them in progress.
It then creates tasks based on these records.
- If no PROCESSACTION records with a status of 3 exist, it tries
to select records that have a value of 2 only if their LAST_UPDATE_DT
value is earlier than the current time minus the maximum processing
time. In this case, Event Manager retries
these tasks that were previously marked as in progress but did not
finish processing.
- Default value: 3600000
- Dynamic: false
/IBM/EventManager/QueueExplorer/className
- Description: Specifies the class used to query the queue
used by Event Manager.
This class must implement the com.dwl.commoncomponents.eventmanager.IQueueExplorer
interface.
In time-based event detection that is started the com.dwl.commoncomponents.eventmanager.client.EventDetectionScheduleController
class, the class in this configuration element queries the depth of
the queue in order to estimate a desirable number of tasks to put
on the queue per cycle in the event detection.
Two implementation
classes are provided:
- com.dwl.commoncomponents.eventmanager.DefaultQueueExplorer
- com.dwl.commoncomponents.eventmanager.integration.MQQueueExplorer
The DefaultQueueExplorer class used JMS API to implement
the interface. The MQQueueExplorer class uses WebSphere MQ API to implement the interface.
- Default value: com.dwl.commoncomponents.eventmanager.DefaultQueueExplorer
- Dynamic: true
/IBM/FinancialServices/Contract/Search/maxResults
- Description: Specifies the maximum number of records returned
from a searchContract transaction.
- Default value: 100
- Dynamic: true
/IBM/FinancialServices/Contract/ContractPartyRole/partyInquiryLevel
- Description: Specifies the party inquiry level used in
the addContractPartyRole and updateContractPartyRole transactions.
The inquiry level determines whether the TCRMPartyBObj object will
be returned in these transactions, and what kinds of children objects
will be returned under the TCRMPartyBObj object.
- Default value: 4
- Dynamic: true
/IBM/FinancialServices/ExtendedAdminContractIdSearch/enabled
- Description: Determines whether the AdminContractIdFieldType
and AdminContractId attributes in a TCRMPartialSysAdminKeyBObj object
provided in a searchContract transaction are taken in account as search
criteria. When this configuration element is set to true,
and a TCRMPartialSysAdminKeyBObj object is included in the TCRMContractSearchBObj
object in the request, the AdminContractIdFieldType and AdminContractId
attributes provided in the TCRMPartialSysAdminKeyBObj are used to
search for any matched records in the NATIVEKEY table.
- Default value: false
- Dynamic: false
/IBM/MessagingAdapter/Exception/CommitOnSendFail/enabled
- Description: Determines whether the transaction is committed
if the response fails to be sent to the response queue.
Note: If /IBM/MessagingAdapter/Exeption/CommitOnSendFail/enabled
exists in the configuration table, then that value will be used instead
of the value of this parameter. Note: "Exeption," compared to "Exception."
- Default value: true
- Dynamic: false
/IBM/MessagingAdapter/Exception/JmsMsgToOutboundQueue/enabled
- Description: When InfoSphere MDM returns
an exception while processing an inbound request message, this property
determines whether to put details of the exception in the outbound
message (true) or not (false).
Note: If
/IBM/MessagingAdapter/Exeption/JmsMsgToOutboundQueue/enabled exists
in the configuration table, then that value will be used instead of
the value of this parameter. Note: "Exeption," compared to "Exception."
- Default value: true
- Dynamic: false
/IBM/MessagingAdapter/Exception/maxRetryLimit
- Description: Determines how many times the Messaging Adapter
attempts to reprocess a failed inbound request message by invoking
DWLServiceController.
- Default value: 3
- Dynamic: true
/IBM/MessagingAdapter/Exception/NonXmlToOutboundQueue/enabled
- Description: When an exception occurs during processing
of an inbound message (excluding InfoSphere MDM Service
Errors), this property determines whether to put details of the exception
in the outbound message (true) or not (false).
To
ensure that the exception details are included as well-formed XML,
the exception message is wrapped in an Element tag specified by the
/IBM/MessagingAdapter/Exception/xmlTagName configuration element.
Note: If
/IBM/MessagingAdapter/Exeption/NonXmlToOutboundQueue/enabled exists
in the configuration table, then that value will be used instead of
the value of this parameter. Note: "Exeption," compared to "Exception."
- Default value: true
- Dynamic: false
/IBM/MessagingAdapter/Exception/xmlTagName
/IBM/MessagingAdapter/JMSQueue/JMSMessageHeaderCopy/enabled
- Description: Determines whether the JMS Message Header
from the inbound message is copied to the outbound message.
- Default value: true
- Dynamic: true
/IBM/MessagingAdapter/JMSQueue/JMSMessageMsgIdToCorrId/enabled
- Description: Determines whether the JMS MessageId from
the inbound message is mapped to the JMS CorrelationId of the outbound
message.
- Default value: false
- Dynamic: false
/IBM/MessagingAdapter/JMSQueue/SendResponseToOUTBOUND/enabled
- Description: Determines whether the response is sent to
an outbound queue.
- Default value: true
- Dynamic: false
/IBM/MessagingAdapter/Request/encoding
- Description: Specifies the encoding to use to encode the
request if the JMS request is a ByteMessage.
- Default value: UTF-16BE
- Dynamic: false
/IBM/MessagingAdapter/RequestHeader/compositeConstructor
- Description: Specifies the value corresponding to the CompositeConstructor
value of the context argument for the DWLServiceController class.
- Default value: DWLService
- Dynamic: true
/IBM/MessagingAdapter/RequestHeader/compositeParser
- Description: Specifies the value corresponding to the CompositeParser
value of the context argument for the DWLServiceController class.
- Default value: DWLService
- Dynamic: true
/IBM/MessagingAdapter/RequestHeader/compositeTxn
- Description: Specifies the value corresponding to the CompositeTxn
value of the context argument for the DWLServiceController class.
- Default value: no
- Dynamic: true
/IBM/MessagingAdapter/RequestHeader/constructor
- Description: Specifies the value corresponding to the Constructor
value of the context argument for the DWLServiceController class.
- Default value: TCRMService
- Dynamic: false
/IBM/MessagingAdapter/RequestHeader/operationType
- Description: Specifies the value corresponding to the OperationType
value of the context argument for the DWLServiceController class.
- Default value: All
- Dynamic: false
/IBM/MessagingAdapter/RequestHeader/parser
- Description: Specifies the value corresponding to the Parser
value of the context argument for the DWLServiceController class.
- Default value: TCRMService
- Dynamic: false
/IBM/MessagingAdapter/RequestHeader/requestType
- Description: Specifies the value corresponding to the RequestType
value of the context argument for the DWLServiceController class.
- Default value: standard
- Dynamic: false
/IBM/MessagingAdapter/RequestHeader/responseType
- Description: Specifies the value corresponding to the ResponseType
value of the context argument for the DWLServiceController class
- Default value: standard
- Dynamic: false
/IBM/MessagingAdapter/RequestHeader/targetApplication
- Description: Specifies the value corresponding to the TargetApplication
value of the context argument for the DWLServiceController class.
- Default value: tcrm
- Dynamic: false
/IBM/MessagingAdapter/Response/encoding
- Description: Specifies the encoding to use to encode the
response if the JMS response is a ByteMessage.
- Default value: UTF-16BE
- Dynamic: false
/IBM/MessagingAdapter/Response/ReplyToQueue/useResponseQCF
- Description: Determines whether the InfoSphere MDM Messaging
Response Queue Connection Factory can be used to send response messages
to the queue mentioned in the replyToQueue JMS header (true)
or not (false).
- Default value: true
- Dynamic: true
/IBM/OTS/IgnoredGroupsSuffix
- Description: Specifies groups to be ignored when constructing
an OTS query. The comma separated values are treated as suffixes or
complete group names.
- Default value: "NLS,NLSBObj,TermConditionBObj,RelatedProductsBObj,AccessDateValue,TCRMMultiplePartyCDCBObj"
- Dynamic: true
/IBM/Party/AbiliTecLink/addressUsageType1
- Description: Specifies the type code indicating an address
that is used to generate an AbiliTec Address. This value should be
one of the ADDR_USAGE_TP_CD values in the CDADDRUSAGETP table.
- Default value: 1
- Dynamic: false
/IBM/Party/AbiliTecLink/IdType
- Description: Specifies the type code indicating an AbiliTecLink
ID. This value should be one of the ID_TP_CD values in the CDIDTP
table.
- Default value: 11
- Dynamic: false
/IBM/Party/AbiliTecLink/orgNameUsageType1
- Description: Specifies the type code indicating an organization
name that is used to generate an AbiliTec commercial name. This value
should be one of the NAME_USAGE_TP_CD values in the CDNAMEUSAGETP
table.
- Default value: 1
- Dynamic: false
/IBM/Party/AbiliTecLink/personNameUsageType1
- Description: Specifies the type code indicating a person
name that is used to generate an AbiliTec consumer name. This value
should be one of the NAME_USAGE_TP_CD values in the CDNAMEUSAGETP
table.
- Default value: 1
- Dynamic: false
/IBM/Party/Acxiom/AbiliTecPersonRequestURL
- Description: Specifies the person link of the Acxiom server.
- Default value: https://idtest.acxiom.com/abilitec-consumer/1.0
- Dynamic: false
/IBM/Party/Acxiom/AbiliTecOrganizationRequestURL
- Description: Specifies the organization link of the Acxiom
server.
- Default value: https://idtest.acxiom.com/abilitec-business/1.0
- Dynamic: false
/IBM/Party/Acxiom/AbiliTecRequestURL
- Description: Specifies the URL of the Acxiom server.
- Default value: https://interactivetest.acxiom.com/httpgateway
- Dynamic: false
/IBM/Party/Acxiom/abiliTecSupportedCountries
- Description: Specifies the country supported by Acxiom.
Currently, only USA is supported. The configuration element value
is the country type code for USA in the application. This value should
be one of the COUNTRY_TP_CD values in the CDCOUNTRYTP table.
- Default value: 185
- Dynamic: false
/IBM/Party/Acxiom/applicationId
- Description: Specifies the Acxiom application ID.
- Default value: test
- Dynamic: false
/IBM/Party/Acxiom/password
- Description: Specifies the Acxiom user password.
- Default value: A blank (that is, a blank value).
- Dynamic: false
/IBM/Party/Acxiom/userId
- Description: Specifies the Acxiom user ID.
- Default value: A blank (that is, a blank value).
- Dynamic: false
/IBM/Party/Acxiom/Return_Derived_Link/enabled
- Description: Determines whether Acxiom returns a derived
link when no maintained link is found.
- Default value: true
- Dynamic: false
/IBM/Party/CollapseMutipleParties/collapsedPartiesNumberLimit
- Description: Used by the default external rule FindAllSuspectMatchRules
to specify the maximum number of A1 matches found. If this value is
0, this rule returns all A1 matches found.
- Default value: 0
- Dynamic: true
/IBM/Party/CollapseMutipleParties/InactiveReasonType/collapse
- Description: Specifies the type code indicating that the
party is inactive because the party was collapsed. This value should
be one of the INACT_REASON_TP_CD values in the CDINACTREASONTP table.
- Default value: 2
- Dynamic: false
/IBM/Party/CollapseMutipleParties/InactiveReasonType/split
- Description: Specifies the type code indicating that the
party is inactive because the party was split. This value should be
one of the INACT_REASON_TP_CD values in the CDINACTREASONTP table.
- Default value: 4
- Dynamic: false
/IBM/Party/CollapseMutipleParties/PartyLinkReasonType/collapse
- Description: Specifies the type code indicating that the
party is linked to another party because the party was collapsed.
This value should be one of the LINK_REASON_TP_CD values in the CDLINKREASONTP
table.
- Default value: 1
- Dynamic: false
/IBM/Party/CollapseMutipleParties/PartyLinkReasonType/split
- Description: Specifies the type code indicating that the
party is linked to another party because the party was split. This
value should be one of the LINK_REASON_TP_CD values in the CDLINKREASONTP
table.
- Default value: 2
- Dynamic: false
/IBM/Party/CollapseMutipleParties/PartyLinkReasonType/undocollapse
- Description: Specifies the type code indicating that the
cloned party is linked to its original source party after an undo
collapse operation. This value should be one of the LINK_REASON_TP_CD
values in the CDLINKREASONTP table.
- Default value: 3
- Dynamic: false
/IBM/Party/ContactMethod/PhoneCategoryType
- Description: Specifies the type code indicating the contact
method category type for the party phone number details. This value
is used by the phone number normalization rule and should be one of
the CONT_METH_CAT_CD values in the CDCONTMETHCAT table.
- Default value: 1
- Dynamic: false
/IBM/Party/CriticalDataChangeProcessing/enabled
- Description: Determines whether critical data change processing
is enabled.
- Default value: false
- Dynamic; true
/IBM/Party/DUNSNumber/ConfidenceCode/Threshold
- Description: Used by the default external rule DnBMatchConfidenceRule
to specify the threshold for the confidence code.
- Default value: 7
- Dynamic: true
/IBM/Party/ExcludePartyNameStandardization/enabled
- Description: Determines whether name standardization is
excluded.
- Default value: false
- Dynamic: false
/IBM/Party/IdentifierGeneration/Factory/className
- Description: Specifies the factory class name of the ID
generator.
- Default value: com.dwl.tcrm.utilities.MDMPartyIdentifierFactory
- Dynamic: true
/IBM/Party/IdentifierGeneration/Validation/enabled
- Description: Determines whether generated IDs require validation.
- Default value: false
- Dynamic: false
/IBM/Party/IdentifierGeneration/Validator/className
- Description: Specifies the class to validate generated
IDs.
- Default value: com.dwl.tcrm.utilities.MDMPartyIdentifierValidator
- Dynamic: true
/IBM/Party/InternalValidation/lastUpdateUserType
- Description: If this configuration element value is userpartyid,
the system treats the requesterName value in the DWLControl object
as a party ID and validates that the party ID exists.
- Default value: userid
- Dynamic: false
/IBM/Party/LocationNormalization/enabled
- Description: Determines whether location normalization
is enabled. For example, address line 1 is normalized into street
number, street name, and street type.
- Default value: false
- Dynamic: false
/IBM/Party/PartyMatch/PartyIdentification/organizationTax
- Description: Specifies the type code indicating an organization's
corporate tax identification number. This value should be one of the
ID_TP_CD values in the CDIDTP table.
- Default value: 2
- Dynamic: false
/IBM/Party/PartyMatch/PartyIdentification/personSin
- Description: Specifies the type code indicating a person's
social insurance number (SIN). This value should be one of the ID_TP_CD
values in the CDIDTP table.
- Default value: 10
- Dynamic: false
/IBM/Party/PartyMatch/PartyIdentification/personTax
- Description: Specifies the type code indicating a person's
social security number (SSN). This value should be one of the ID_TP_CD
values in the CDIDTP table.
- Default value: 1
- Dynamic: false
/IBM/Party/PhoneticSearch/threshHold
- Description: Specifies the number of exact matches returned
by a search transaction that is sufficient to warrant not adding phonetic
search results to the result set.
- Default value: 0
- Dynamic: true
/IBM/Party/PhoneticSearch/AddressSearch/enabled
- Description: Determines whether phonetic search on address
is enabled.
- Default value: false
- Dynamic: true
/IBM/Party/PhoneticSearch/AddressSearch/maxLength
- Description: Specifies the maximum length of the phonetic
keys generated for an address.
- Default value: 4
- Dynamic: true
/IBM/Party/PhoneticSearch/HierarchyOrganizationSearch/enabled
- Description: Determines whether phonetic search on organization
name is enabled on the searchNodeInOrganizationHierarchy transaction.
- Default value: false
- Dynamic: true
/IBM/Party/PhoneticSearch/HierarchyPersonSearch/enabled
- Description: Determines whether phonetic search on person
name is enabled on the searchNodeInPersonHierarchy transaction.
- Default value: false
- Dynamic: true
/IBM/Party/PhoneticSearch/OrganizationNameSearch/enabled
- Description: Determines whether phonetic search on organization
name is enabled.
- Default value: false
- Dynamic: true
/IBM/Party/PhoneticSearch/OrganizationNameSearch/maxLength
- Description: Specifies the maximum length of the phonetic
keys generated for an organization name.
- Default value: 4
- Dynamic: true
/IBM/Party/PhoneticSearch/PersonNameSearch/enabled
- Description: Determines whether phonetic search on person
name is enabled.
- Default value: false
- Dynamic: true
/IBM/Party/PhoneticSearch/PersonNameSearch/maxLength
- Description: Specifies the maximum length of the phonetic
keys generated for a person name.
- Default value: 4
- Dynamic: true
/IBM/Party/PrivacyPreference/ValidateProductEntityWithProductDomain/enabled
- Description: Determines whether to use the product domain
to validate a product that is associated with a TCRMEntityInstancePrivPrefBObj
object. If this value is set to false, the product
is validated against the CDPRODTP code table. Otherwise, the product
is validated using the data model in the product domain.
- Default value: false
- Dynamic: false
/IBM/Party/Search/maxResults
- Description: Specifies the maximum number of records returned
from a searchParty, searchPerson, or searchOrganization transaction.
- Default value: 100
- Dynamic: true
/IBM/Party/Search/ReturnValue/organizationAddressUsageType
- Description: Specifies the organization address usage type
to return in the response as part of the search summary. This value
should be one of the ADDR_USAGE_TP_CD values in the CDADDRUSAGETP
table.
- Default value: 3
- Dynamic: false
/IBM/Party/Search/ReturnValue/organizationIdentificationType
- Description: Specifies the organization identification
type to return in the response as part of the search summary. This
value should be one of the ID_TP_CD values in the CDIDTP table.
- Default value: 2
- Dynamic: false
/IBM/Party/Search/ReturnValue/organizationNameUsageType
- Description: Specifies the priority list for organization
name usage types to return in the response as part of the search summary.
This value should be a list of all of the ORG_NAME_TP_CD values in
the CDORGNAMETP table.
- Default value: 1,2,3
- Dynamic: false
/IBM/Party/Search/ReturnValue/personAddressUsageType
- Description: Specifies the person address usage type to
return in the response as part of the search summary. This value should
be one of the ADDR_USAGE_TP_CD values in the CDADDRUSAGETP table.
- Default value: 1
- Dynamic: false
/IBM/Party/Search/ReturnValue/personIdentificationType
- Description: Specifies the person identification type to
return in the response as part of the search summary. This value should
be one of the ID_TP_CD values in the CDIDTP table.
- Default value: 1
- Dynamic: false
/IBM/Party/Search/ReturnValue/personNameUsageType
- Description: Specifies the priority list for person name
usage types to return in the response as part of the search summary.
This value should be a list of all of the NAME_USAGE_TP_CD values
in the CDNAMEUSAGETP table.
- Default value: 1,7,4,2,5,3,6,8
- Dynamic: false
/IBM/Party/Standardizer/Address/className
- Description: Specifies the address standardizer class.
- Default value: com.dwl.tcrm.coreParty.component.TCRMAddressStandardizer
- Dynamic: true
/IBM/Party/Standardizer/Name/className
- Description: Specifies the name standardizer class.
- Default value: com.dwl.tcrm.coreParty.component.TCRMPartyStandardizer
- Dynamic: true
/IBM/Party/SummaryIndicator/enabled
- Description: Determines whether the Summary Data Indicator
feature is enabled.
- Default value: off
- Dynamic: false
/IBM/Party/SuspectProcessing/enabled
- Description: Determines whether Suspect Processing is enabled.
- Default value: true
- Dynamic: true
/IBM/Party/SuspectProcessing/AddParty/returnSuspect
- Description: Controls how A2 suspects are returned in an
addParty transaction. This configuration element is used in conjunction
with the <MandatorySearchDone> element of an addParty transaction.
If the <MandatorySearchDone> element is set to No on
the request and this configuration element is enabled, and if A2 parties
are found and no A1 parties, then the A2 parties are returned in the
response and no new party is added. The transaction is essentially
halted.
- Default value: true
- Dynamic: true
/IBM/Party/SuspectProcessing/PersistDuplicateParties/enabled
- Description: Determines whether a duplicate A1 party is
persisted based on some predefined criteria.
- Default value: false
- Dynamic: true
/IBM/Party/SuspectProcessing/SuspectReasonType/systemMarked
- Description: Specifies the type code indicating that the
suspect is marked by the system. This value should be one of the SUSP_SOURCE_TP_CD
values in the CDSUSPECTSOURCETP table.
- Default value: 2
- Dynamic: false
/IBM/Party/SuspectProcessing/SuspectReasonType/userMarked
- Description: Specifies the type code indicating that the
suspect is marked by a user. This value should be one of the SUSP_SOURCE_TP_CD
values in the CDSUSPECTSOURCETP table.
- Default value: 1
- Dynamic: false
/IBM/Party/SuspectProcessing/SuspectStatusType/criticalChangeResolved
- Description: Specifies the type code indicating that the
suspect was investigated, and the critical data change was resolved.
This value should be one of the SUSP_ST_TP_CD values in the CDSUSPECTSTATUSTP
table.
- Default value: 5
- Dynamic: false
/IBM/Party/SuspectProcessing/SuspectStatusType/duplicateParty
- Description: Specifies the type code indicating that the
suspect was investigated, and the parties are duplicates. This value
should be one of the SUSP_ST_TP_CD values in the CDSUSPECTSTATUSTP
table.
- Default value: 4
- Dynamic: false
/IBM/Party/SuspectProcessing/SuspectStatusType/duplicatePartyDoNotCollapse
- Description: Specifies the type code indicating that the
suspect is under investigation, the parties are suspected duplicates,
and should not be collapsed. This value should be one of the SUSP_ST_TP_CD
values in the CDSUSPECTSTATUSTP table.
- Default value: 6
- Dynamic: false
/IBM/Party/SuspectProcessing/SuspectStatusType/notDuplicate
- Description: Specifies the type code indicating that the
suspect was investigated, and the parties are not duplicates. This
value should be one of the SUSP_ST_TP_CD values in the CDSUSPECTSTATUSTP
table.
- Default value: 3
- Dynamic: false
/IBM/Party/SuspectProcessing/SuspectStatusType/pending
- Description: Specifies the type code indicating that the
suspect is under investigation, and the critical data change for the
party is pending. This value should be one of the SUSP_ST_TP_CD values
in the CDSUSPECTSTATUSTP table.
- Default value: 2
- Dynamic: false
/IBM/Party/SuspectProcessing/SuspectStatusType/suspectDuplicate
- Description: Specifies the type code indicating that the
suspect is under investigation, and the party and the suspect are
duplicates. This value should be one of the SUSP_ST_TP_CD values in
the CDSUSPECTSTATUSTP table.
- Default value: 1
- Dynamic: false
/IBM/Product/ProductStructureStrategy/Variant
- Description: Specifies the rule ID of the configured VariantStrategy
product structure strategy.
- Default value: A blank (that is, a blank value).
- Dynamic: false
/IBM/Product/ProductSuspectProcessing/ProcessingDepth/categoryInquiryLevel
- Description: Specifies the product category inquiry level
used in the collapseMultipleProducts, undoCollapseMultipleProducts,
and splitProduct transactions.
- Default value: 1
- Dynamic: false
/IBM/Product/ProductSuspectProcessing/ProcessingDepth/productInquiryLevel
- Description: Specifies the product inquiry level used in
the collapseMultipleProducts, undoCollapseMultipleProducts, and splitProduct
transactions.
- Default value: 4
- Dynamic: false
/IBM/Product/ProductSuspectProcessing/ProcessingDepth/relatedProductInquiryLevel
- Description: Specifies the related product inquiry level
used in the collapseMultipleProducts, undoCollapseMultipleProducts,
and splitProduct transactions.
- Default value: 1
- Dynamic: false
/IBM/Product/ProductSuspectProcessing/ProcessingDepth/partyInquiryLevel
- Description: Specifies the party inquiry level used in
the undoCollapseMultipleProducts transaction.
- Default value: 4
- Dynamic: false
/IBM/Product/Search/MaxReturn
- Description: Specifies the maximum number of records returned
from a searchProductInstance transaction.
- Default value: 100
- Dynamic: true
/IBM/Product/SpecValueSearch/CaseSensitive/enabled
- Description: Determines whether case sensitive search for
string value is enabled.
- Default value: false
- Dynamic: true
/IBM/Product/SpecValueSearch/MaxSpecValueSearchBObjs
- Description: Specifies the maximum number of spec value
search business objects in the searchProductInstance transaction.
- Default value: 5
- Dynamic: false
/IBM/Product/SpecValueSearch/MaxSpecValueSearchCriteriaBObjs
- Description: Specifies the maximum number of spec value
search criteria business objects in the searchProductInstance transaction.
- Default value: 20
- Dynamic: false
/IBM/Product/SpecValueSearch/SpecValueSearchSQL/className
- Description: Specifies the class to construct search SQL
snippet.
- Default value: defaulted
- Dynamic: true
/IBM/Product/SuspectSearch/maxResults
- Description: Specifies the maximum number of records returned
from a searchProductSuspect transaction
- Default value: 100
- Dynamic: true
/IBM/ProductServices/RevisionHistory/DateRange/maxYears
- Description: Specifies the maximum number of years to limit
the date range that can be used in the getRevisionHistory transaction.
- Default value: 1
- Dynamic: false
/IBM/ThirdPartyAdapters/Address/Formatter
- Description: Specifies a pattern that is used to format
address information before standardization. The pattern must adhere
to the vendor's address standardization specifications.
- Default value: AddressLineOne=DelDesignator+DelId+StreetNumber+PreDirectional+
StreetName+StreetSuffix+PostDirectional;AddressLineTwo=BoxDesignator+BoxId
+StnInfo+StnId;AddressLineThree=BuildingName+Region+DelInfo
- Dynamic: false
/IBM/ThirdPartyAdapters/Address/PostFormatter
- Description: Specifies a pattern that is used to format
address information after standardization. The pattern must adhere
to the vendor's address standardization specifications. To avoid formatting
address information after standardization, you can set the value to None,
which will cause the address to keep the information set by the standardizer.
- Default value: AddressLineOne=DelDesignator+DelId+StreetNumber+PreDirectional+
StreetName+StreetSuffix+PostDirectional;AddressLineTwo=BoxDesignator+BoxId
+StnInfo+StnId;AddressLineThree=BuildingName+Region+DelInfo
- Dynamic: false
/IBM/ThirdPartyAdapters/EAS/addressUsageTypeMap
/IBM/ThirdPartyAdapters/EAS/chargeCardTypeMap
- Description: Specifies the mapping between the InfoSphere MDM CDCHARGECARDTP
code table values and the IBM InfoSphere Identity Insight
NUM_TYPE or ATTR_TYPE values, depending on the concrete InfoSphere Identity Insight integration.
The
InfoSphere MDM CDCHARGECARDTP
code table values are as follows:
- 1 - Visa
- 2 - Mastercard
- 3 - American Express
- 4 - Diner's Club
For IBM DB2 Relationship Resolution, the
NUM_TYPE value is CC - Credit Card Number.
For DB2 Anonymous Resolution Anonymizer,
the ATTR_TYPE value is CC - Credit Card Number.
- Default value: (1-CC),(2-CC),(3-CC)
- Dynamic: false
/IBM/ThirdPartyAdapters/EAS/contactMethodTypeMap
- Description: Specifies the mapping between the InfoSphere MDM CDCONTMETHTP
code table values and the IBM InfoSphere Identity Insight
NUM_TYPE, ADDR_TYPE, or ATTR_TYPE values, depending on the concrete InfoSphere Identity Insight
integration.
The
InfoSphere MDM CDCONTMETHTP
code table values are as follows:
- 1 - Home telephone
- 2 - Business telephone
- 3 - Facsimile
- 4 - Pager
- 5 - Cellular
- 6 - Business e-mail
- 7 - Personal e-mail
- 8 - Mobile telephone
For IBM DB2 Relationship Resolution, the
NUM_TYPE value is PH - Phone
The ADDR_TYPE
values are as follows:
- H - Home address
- B - Business address
- O - Other address
For DB2 Anonymous
Resolution Anonymizer, the NUM_TYPE value is: PHONE - Phone
Number.
The ATTR_TYPE value is:EMAIL - e-mail
- Default value: (1-PH),(2-PH),(3-PH),(4-PH),(5-PH),(6-B),(7-H),(8-PH)
- Dynamic: false
/IBM/ThirdPartyAdapters/EAS/correctionAction
- Description: Specifies the action for before image in an
update transaction. Valid values are as follows:
- D - Delete
- F - Forced hard-delete
- N - Do not delete
- Default value: D
- Dynamic: false
/IBM/ThirdPartyAdapters/EAS/dsrcCode
- Description: Specifies the unique data source code that IBM InfoSphere Identity Insight uses to identify InfoSphere MDM.
- Default value: <DSRC_CODE>
- Dynamic: false
/IBM/ThirdPartyAdapters/EAS/exclusiveSourceSystem
- Description: Specifies a comma delimited string listing
the client system IDs that are feeder systems to InfoSphere MDM and
feeder systems to IBM InfoSphere Identity Insight
at the same time.
- Default value: <EXCLUSIVE_CIENT_SYSTEMS>
- Dynamic: false
/IBM/ThirdPartyAdapters/EAS/idStatusTypeMap
/IBM/ThirdPartyAdapters/EAS/idTypeMap
- Description: Specifies the mapping between the InfoSphere MDM CDIDTP
code table values and the IBM InfoSphere Identity Insight
NUM_TYPE values, depending on the concrete InfoSphere Identity Insight integration.
The
InfoSphere MDM CDIDTP
code table values are as follows:
- 1 - Social security number
- 2 - Corporate tax identification
- 3 - Driver's license
- 4 - Birth certificate
- 5 - Mother's maiden name
- 6 - Tax identification number
- 7 - Tax registration number
- 8 - Passport Nnumber
- 9 - Health Card
- 10 - Social insurance number
- 11 - ABILITECLINK
For IBM DB2 Relationship Resolution, the
NUM_TYPE values are as follows:
- DL - Driver's license
- PP - Passport number
- SSN - Social security number
For DB2 Anonymous
Resolution Anonymizer, the NUM_TYPE values are as follows:
- DL - Driver's license
- SSN - Social security number
- Default value: (1-SSN),(3-DL), (8-PP)
- Dynamic: false
/IBM/ThirdPartyAdapters/EAS/nameUsageTypeMap
/IBM/ThirdPartyAdapters/EAS/queue
- Description: Specifies the queue defined for the JMS provider,
which is used when InfoSphere MDM sends
UMF message to IBM InfoSphere Identity Insight.
- Default value: jms/EASQueue
- Dynamic: false
/IBM/ThirdPartyAdapters/EAS/queueConnectionFactory
- Description: Specifies the queue connection factory defined
for the JMS provider, which is used when InfoSphere MDM sends
UMF message to IBM InfoSphere Identity Insight.
- Default value: jms/EASQCF
- Dynamic: false
/IBM/ThirdPartyAdapters/EAS/resolutionType
- Description: Specifies the concrete IBM InfoSphere Identity
Insight integration. Valid values are as follows:
- NONE - No InfoSphere Identity
Insight integration with InfoSphere MDM
- RR - InfoSphere MDM is
integrated with a IBM DB2 Relationship Resolution instance
- AR - InfoSphere MDM is
integrated with a DB2 Anonymous
Resolution Anonymizer
- Default value: NONE
- Dynamic: false
/IBM/ThirdPartyAdapters/IIS/defaultCountry
- Description: Specifies the type code indicating that default
country when a country is not provided in the data. This value should
be one of the COUNTRY_TP_CD values in the CDCOUNTRYTP table. This
configuration element is used by integration with the IIS Server.
- Default value: 185
- Dynamic: false
/IBM/ThirdPartyAdapters/IIS/initialContextFactory
- Description: Specifies the JNDI context factory class used
to look up the IIS Server. This configuration element is used by integration
with the IIS Server.
- Default value: com.ibm.websphere.naming.WsnInitialContextFactory
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/providerURL
- Description: Specifies the URL pointing to the IIS server.
This configuration element is used by integration with the IIS Server.
- Default value: iiop://iishost:2809
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchOrganization/operationName
- Description: Specifies the method on the IBM WebSphere DataStage® service that the
adapter class calls in matching organizations. This configuration
element is used by integration with the IIS Server.
- Default value: match
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchOrganization/Converter/className
- Description: Specifies the class used to convert the data
between the InfoSphere MDM data
format and the IBM InfoSphere DataStage data format used in matching
organizations. This configuration element is used by integration with
the IIS Server.
- Default value: com.ibm.mdm.thirdparty.integration.iis8.converter.MatchOrganizationInfoServerConverter
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchOrganization/DesiredTypes/addressUsage
- Description: Specifies the address usage type of an organization
to consider when matching organizations. This configuration element
is used by integration with the IIS Server.
- Default value: An asterisk (*).
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchOrganization/DesiredTypes/identification
- Description: Specifies the identification type of an organization
to consider when matching organizations. This configuration element
is used by integration with the IIS Server.
- Default value: 2
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchOrganization/DesiredTypes/nameUsage
- Description: Specifies the name usage type of an organization
to consider when matching organizations. This configuration element
is used by integration with the IIS Server.
- Default value: An asterisk (*).
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchOrganization/Input/dataType
- Description: Specifies the name of the IBM WebSphere DataStage input data class
used in matching organizations. This configuration element is used
by integration with the IIS Server.
- Default value: MatchInput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchOrganization/Output/dataType
- Description: Specifies the name of the IBM WebSphere DataStage output data class
used in matching organizations. This configuration element is used
by integration with the IIS Server.
- Default value: MatchOutput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchOrganization/Service/basicPackageName
- Description: Specifies the basic package name of the remote
home interface of the IBM WebSphere DataStage service that the adapter class
uses in matching organizations. This configuration element is used
by integration with the IIS Server.
- Default value: com.ibm.isd.MDMQS.MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchOrganization/Service/jndi
- Description: Specifies the remote JNDI name of the IBM WebSphere DataStage service that the adapter class
uses in matching organizations. This configuration element is used
by integration with the IIS Server.
- Default value: ejb/MDMQS/MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchOrganization/Service/name
- Description: Specifies the name of the remote home interface
of the IBM WebSphere DataStage service that the adapter class
uses in matching organizations. This configuration element is used
by integration with the IIS Server.
- Default value: MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchPerson/operationName
- Description: Specifies the method on the IBM WebSphere DataStage service that the
adapter class calls in matching persons. This configuration element
is used by integration with the IIS Server.
- Default value: match
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchPerson/Converter/className
- Description: Specifies the class used to convert the data
between the InfoSphere MDM data
format and the IBM WebSphere DataStage data format used in matching
persons. This configuration element is used by integration with the
IIS Server.
- Default value: com.ibm.mdm.thirdparty.integration.iis8.converter.MatchPersonInfoServerConverter
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchPerson/DesiredTypes/addressUsage
- Description: Specifies the address usage type of a person
to consider when matching persons. This configuration element is used
by integration with the IIS Server.
- Default value: An asterisk (*).
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchPerson/DesiredTypes/identification
- Description: Specifies the identification type of a person
to consider when matching persons. This configuration element is used
by integration with the IIS Server.
- Default value: 1
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchPerson/DesiredTypes/nameUsage
- Description: Specifies the name usage type of a person
to consider when matching persons. This configuration element is used
by integration with the IIS Server.
- Default value: An asterisk (*).
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchPerson/Input/dataType
- Description: Specifies the name of the IBM WebSphere DataStage input data class
used in matching persons. This configuration element is used by integration
with the IIS Server.
- Default value: MatchInput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchPerson/Output/dataType
- Description: Specifies the name of the IBM WebSphere DataStage output data class
used in matching persons. This configuration element is used by integration
with the IIS Server.
- Default value: MatchOutput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchPerson/Service/basicPackageName
- Description: Specifies the basic package name of the remote
home interface of the IBM WebSphere DataStage service that the adapter class
uses in matching persons. This configuration element is used by integration
with the IIS Server.
- Default value: com.ibm.isd.MDMQS.MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchPerson/Service/jndi
- Description; Specifies the remote JNDI name of the IBM WebSphere DataStage service that the adapter class
uses in matching persons. This configuration element is used by integration
with the IIS Server.
- Default value: ejb/MDMQS/MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/MatchPerson/Service/name
- Description: Specifies the name of the remote home interface
of the IBM WebSphere DataStage service that the adapter class
uses in matching persons. This configuration element is used by integration
with the IIS Server.
- Default value: MDMQSService
- Dynamic; true
/IBM/ThirdPartyAdapters/IIS/NormalizeAddress/operationName
- Description: Specifies the method on the Quality Stage
service that the adapter class calls in normalizing organization names.
This configuration element is used by integration with the IIS Server.
- Default value: standardizeAddress
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/NormalizeAddress/AttributesMap/Input/dataType
- Description: Specifies the name of the Quality Stage input
data class used in normalizing addresses. This configuration element
is used by integration with the IIS Server.
- Default value: AddressInput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/NormalizeAddress/AttributesMap/Input/map
- Description: Specifies a semicolon delimited string indicating
the Quality Stage input format used in normalizing addresses. This
configuration element is used by integration with the IIS Server.
- Default value: addresslineone=AddressLineOne+ResidenceNumber;addresslinetwo=AddressLineTwo; addresslinethree=AddressLineThree;city=City;state=ProvinceStateValue;
postalcode=ZipPostalCode;country=CountryValue
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/NormalizeAddress/AttributesMap/Output/dataType
- Description; Specifies the name of the Quality Stage output
data class used in normalizing addresses. This configuration element
is used by integration with the IIS Server.
- Default value: AddressOutput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/NormalizeAddress/AttributesMap/Output/failureIndicators
- Description; Specifies a semicolon delimited string indicating
the methods on the output data class to call to return unnormalized
values in an address. This configuration element is used by integration
with the IIS Server.
- Default value: unhandledaddresstext_mns;nonprocesseddata_mns;unhandleddata_mnpost
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/NormalizeAddress/AttributesMap/Output/map
- Description: Specifies a semicolon delimited string indicating
the Quality Stage output format used in normalizing addresses. This
configuration element is used by integration with the IIS Server.
- Default value: ResidenceNumber=unittype_mnpost+unitvalue_mnpost;AddressLineOne=addresslineone_formatted;AddressLineTwo=addresslinetwo_formatted;City=cityname_mns;ProvinceStateValue=stateabbreviation_mns;ZipPostalCode=fullpostalcode_mns;BuildingName=buildingname_mns;StreetNumber=housenumber_mns;StreetName=streetname_mns;StreetSuffix=streetsuffixtype_mns;PreDirectional=streetprefixdirection_mns;PostDirectional=streetsuffixdirection_mns;BoxDesignator=boxtype_mns;BoxId=boxvalue_mns;StnInfo=stationinformation;StnId=stationidentifier;Region=region;DelDesignator=deliverydesignator;DelId=deliveryidentifier;DelInfo=addtldeliveryinfo;ZipPostalBarCode=postalbarcode;PhoneticCity=nysiisofcityname_mns;PhoneticStreetName=nysiisofstreetnamerootword_mns
- Dynamic: true
- Note: Clients may have extra address information, for example,
floor numbers, and need extra mapping in order to capture it, and
this extra address information may be lost if you use the default
mapping. To capture the information you must add an extra mapping
value, AddressLineThree=addresslinethree_formatted,
to the mapping.
/IBM/ThirdPartyAdapters/IIS/NormalizeAddress/Converter/className
- Description: Specifies the class used to convert the data
between the InfoSphere MDM data
format and the Quality Stage data format used in normalizing addresses.
This configuration element is used by integration with the IIS Server.
- Default value: com.ibm.mdm.thirdparty.integration.iis8.converter.DefaultInfoServerConverter
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/NormalizeAddress/Service/basicPackageName
- Description: Specifies the basic package name of the remote
home interface of the Quality Stage service that the adapter class
uses in normalizing addresses. This configuration element is used
by integration with the IIS Server.
- Default value; com.ibm.isd.MDMQS.MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/NormalizeAddress/Service/jndi
- Description: Specifies the remote JNDI name of the Quality
Stage service that the adapter class uses in normalizing addresses.
This configuration element is used by integration with the IIS Server.
- Default value: ejb/MDMQS/MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/NormalizeAddress/Service/name
- Description: Specifies the name of the remote home interface
of the Quality Stage service that the adapter class uses in normalizing
addresses. This configuration element is used by integration with
the IIS Server.
- Default value: MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/operationName
- Description: Specifies the method on the Quality Stage
service that the adapter class calls in standardizing addresses. This
configuration element is used by integration with the IIS Server.
- Default value: standardizeAddress
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/AttributesMap/Input/dataType
- Description: Specifies the name of the Quality Stage input
data class used in standardizing addresses. This configuration element
is used by integration with the IIS Server.
- Default value: AddressInput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/AttributesMap/Input/map
- Description: Specifies a semicolon delimited string indicating
the Quality Stage input format used in standardizing addresses. This
configuration element is used by integration with the IIS Server.
- Default value: addresslineone=AddressLineOneResidenceNumber;addresslinetwo=AddressLineTwo;addresslinethree=AddressLineThree;city=City;state=ProvinceStateValue;postalcode=ZipPostalCode;country=CountryValue
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/AttributesMap/Output/dataType
- Description: Specifies the name of the Quality Stage output
data class used in standardizing addresses. This configuration element
is used by integration with the IIS Server.
- Default value: AddressOutput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/AttributesMap/Output/failureIndicators
- Description: Specifies a semicolon delimited string indicating
the methods on the output data class to call to return non-standardized
values in an address. This configuration element is used by integration
with the IIS Server.
- Default value: unhandledaddresstext_mns;nonprocesseddata_mns;unhandleddata_mnpost
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/AttributesMap/Output/map
- Description: Specifies a semicolon delimited string indicating
the Quality Stage output format used in standardizing addresses. This
configuration element is used by integration with the IIS Server.
- Default value: ResidenceNumber=unittype_mnpost+unitvalue_mnpost;AddressLineOne=addresslineone_formatted;AddressLineTwo=addresslinetwo_formatted;AddressLineThree=;City=cityname_mns;ProvinceStateValue=stateabbreviation_mns;ZipPostalCode=fullpostalcode_mns;BuildingName=;StreetNumber=;StreetName=;StreetSuffix=;PreDirectional=;PostDirectional=;BoxDesignator=;BoxId=;StnInfo=;StnId=;Region=;DelDesignator=;DelId=;DelInfo=
- Dynamic: true
- Note: Clients may have extra address information, for example,
floor number, and need extra mapping to catch it. The extra address
information may be lost using the default mapping. An extra mapping
value, AddressLineThree=addresslinethree_formatted,
must be added to the mapping.
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/Converter/className
- Description: Specifies the class used to convert the data
between the InfoSphere MDM data
format and the Quality Stage data format used in standardizing addresses.
This configuration element is used by integration with the IIS Server.
- Default value: com.ibm.mdm.thirdparty.integration.iis8.converter.DefaultInfoServerConverter
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/Service/basicPackageName
- Description: Specifies the basic package name of the remote
home interface of the Quality Stage service that the adapter class
uses in standardizing addresses. This configuration element is used
by integration with the IIS Server.
- Default value: com.ibm.isd.MDMQS.MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/Service/jndi
- Description: Specifies the remote JNDI name of the Quality
Stage service that the adapter class uses in standardizing addresses.
This configuration element is used by integration with the IIS Server.
- Default value: ejb/MDMQS/MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/Service/name
- Description: Specifies the name of the remote home interface
of the Quality Stage service that the adapter class uses in standardizing
addresses. This configuration element is used by integration with
the IIS Server.
- Default value: MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeAddress/StandardFormattingIndicator/enabled
- Description: SDetermines whether the address standardization
indicator is enabled. If this value is true, after successful address
standardization, the StandardFormattingIndicator is set to Y and
is persisted in the database. Otherwise, the StandardFormattingIndicator
will retain its input value.
- Default value: true
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeOrganizationName/operationName
- Description: Specifies the method on the Quality Stage
service that the adapter class calls in standardizing organization
names. This configuration element is used by integration with the
IIS Server.
- Default value: standardizeOrgName
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeOrganizationName/AttributesMap/Input/dataType
- Description: Specifies the name of the Quality Stage input
data class used in standardizing organization names. This configuration
element is used by integration with the IIS Server.
- Default value: OrgNameInput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeOrganizationName/AttributesMap/Input/map
- Description: Specifies a semicolon delimited string indicating
the Quality Stage input format used in standardizing organization
names. This configuration element is used by integration with the
IIS Server.
- Default value: organizationname=OrganizationName
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeOrganizationName/AttributesMap/Output/dataType
- Description: Specifies the name of the Quality Stage output
data class used in standardizing organization names. This configuration
element is used by integration with the IIS Server.
- Default value: OrgNameOutput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeOrganizationName/AttributesMap/Output/failureIndicators
- Description: Specifies a semicolon delimited string indicating
the methods on the output data class to call to return non-standardized
values in an organization name. This configuration element is used
by integration with the IIS Server.
- Default value: unhandleddata_mnname;exceptiondata_mnname
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeOrganizationName/AttributesMap/Output/map
- Description: Specifies a semicolon delimited string indicating
the Quality Stage output format used in standardizing organization
names. This configuration element is used by integration with the
IIS Server.
- Default value: SOrganizationName=primaryname_mnname+namesuffix_mnname;PhoneticOrgName=matchprimarywordonenysiis_mnname
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeOrganizationName/Converter/className
- Description; Specifies the class used to convert the data
between the InfoSphere MDM data
format and the Quality Stage data format used in standardizing organization
names. This configuration element is used by integration with the
IIS Server.
- Default value: com.ibm.mdm.thirdparty.integration.iis8.converter.DefaultInfoServerConverter
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeOrganizationName/Service/basicPackageName
- Description: Specifies the basic package name of the remote
home interface of the Quality Stage service that the adapter class
uses in standardizing organization names. This configuration element
is used by integration with the IIS Server.
- Default value: com.ibm.isd.MDMQS.MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeOrganizationName/Service/jndi
- Description: Specifies the remote JNDI name of the Quality
Stage service that the adapter class uses in standardizing organization
names. This configuration element is used by integration with the
IIS Server.
- Default value: ejb/MDMQS/MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizeOrganizationName/Service/name
- Description: Specifies the name of the remote home interface
of the Quality Stage service that the adapter class uses in standardizing
organization names. This configuration element is used by integration
with the IIS Server.
- Default value: MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePersonName/operationName
- Description: Specifies the method on the Quality Stage
service that the adapter class calls in standardizing person names.
This configuration element is used by integration with the IIS Server.
- Default value: standardizePersonName
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePersonName/AttributesMap/Input/dataType
- Description: Specifies the name of the Quality Stage input
data class used in standardizing person names. This configuration
element is used by integration with the IIS Server.
- Default value: PersonNameInput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePersonName/AttributesMap/Input/map
- Description: Specifies a semicolon delimited string indicating
the Quality Stage input format in standardizing person names. This
configuration element is used by integration with the IIS Server.
- Default value: personnameprefix=PrefixValue;persongivennameone=GivenNameOne;
persongivennametwo=GivenNameTwo;personfamilyname=LastName
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePersonName/AttributesMap/Output/dataType
- Description: Specifies the name of the Quality Stage output
data class used in standardizing person names. This configuration
element is used by integration with the IIS Server.
- Default value: PersonNameOutput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePersonName/AttributesMap/Output/failureIndicators
- Description: Specifies a semicolon delimited string indicating
the methods on the output data class to call to return non-standardized
values in a person name. This configuration element is used by integration
with the IIS Server.
- Default value: unhandleddata_mnname;exceptiondata_mnname
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePersonName/AttributesMap/Output/map
- Description: Specifies a semicolon delimited string indicating
the Quality Stage output format in standardizing person names. This
configuration element is used by integration with the IIS Server.
- Default value: StdGivenNameOne=matchfirstname_mnname;StdGivenNameTwo=middlename_mnname; StdLastName=matchprimaryname_mnname;PhoneticLastName=matchprimarywordonenysiis_mnname;PhoneticGivenNameOne=matchfirstnamenysiis_mnname
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePersonName/Converter/className
- Description: Specifies the class used to convert the data
between the InfoSphere MDM data
format and the Quality Stage data format used in standardizing person
names. This configuration element is used by integration with the
IIS Server.
- Default value: com.ibm.mdm.thirdparty.integration.iis8.converter.DefaultInfoServerConverter
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePersonName/Service/basicPackageName
- Description: Specifies the basic package name of the remote
home interface of the Quality Stage service that the adapter class
uses in standardizing person names. This configuration element is
used by integration with the IIS Server.
- Default value: com.ibm.isd.MDMQS.MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePersonName/Service/jndi
- Description: Specifies the remote JNDI name of the Quality
Stage service that the adapter class uses in standardizing person
names. This configuration element is used by integration with the
IIS Server.
- Default value: ejb/MDMQS/MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePersonName/Service/name
- Description: Specifies the name of the remote home interface
of the Quality Stage service that the adapter class uses in standardizing
person names. This configuration element is used by integration with
the IIS Server.
- Default value: MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePhoneNumber/operationName
- Description: Specifies the method on the Quality Stage
service that the adapter class calls in standardizing phone numbers.
This configuration element is used by integration with the IIS Server.
- Default value: standardizePhoneNumber
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePhoneNumber/AttributesMap/Input/dataType
- Description: Specifies the name of the Quality Stage input
data class used in standardizing phone numbers. This configuration
element is used by integration with the IIS Server.
- Default value: PhoneNumberInput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePhoneNumber/AttributesMap/Output/dataType
- Description: Specifies the name of the Quality Stage output
data class used in standardizing phone numbers. This configuration
element is used by integration with the IIS Server.
- Default value: PhoneNumberOutput
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePhoneNumber/Converter/className
- Description: Specifies the class used to convert the data
between the InfoSphere MDM data
format and the Quality Stage data format used in standardizing phone
numbers. This configuration element is used by integration with the
IIS Server.
- Default value: com.ibm.mdm.thirdparty.integration.iis8.converter.PhoneNumberInfoServerConverter
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePhoneNumber/Service/basicPackageName
- Description: Specifies the basic package name of the remote
home interface of the Quality Stage service that the adapter class
uses in standardizing phone numbers. This configuration element is
used by integration with the IIS Server.
- Default value: com.ibm.isd.MDMQS.MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePhoneNumber/Service/jndi
- Description: Specifies the remote JNDI name of the Quality
Stage service that the adapter class uses in standardizing phone numbers.
This configuration element is used by integration with the IIS Server.
- Default value: ejb/MDMQS/MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePhoneNumber/Service/name
- Description: Specifies the name of the remote home interface
of the Quality Stage service that the adapter class uses in standardizing
phone numbers. This configuration element is used by integration with
the IIS Server.
- Default value: MDMQSService
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StandardizePhoneNumber/StandardFormattingIndicator/enabled
- Description: Determines whether the contact method standardization
indicator is used. If this value is true, after successful phone number
standardization, the StandardFormattingIndicator is set to Y and
is persisted in the database. Otherwise, the StandardFormattingIndicator
will retain its input value.
- Default value: true
- Dynamic: true
/IBM/ThirdPartyAdapters/IIS/StubSetter/className
- Description: Specifies the class to configure web service
client stub properties.
- Default value: defaulted
- Dynamic: false
/IBM/ThirdPartyAdapters/IIS/StubSetter/enabled
- Description: Determines whether stub setter is enabled.
- Default value: false
- Dynamic: false
/IBM/ThirdPartyAdapters/PhoneNumber/Formatter
- Description: Specifies a pattern that is used to format
phone number information. The pattern must adhere to the vendor's
phone number standardization specifications.
- Default value: ReferenceNumber=PhoneCountryCode+PhoneAreaCode+PhoneExchange+PhoneNumber+PhoneExtension
- Dynamic: true
/IBM/XMLServices/Response/dtd
- Description: Specifies the schema against which TCRMService
responses are validated.
- Default value: MDMDomains.xsd
- Dynamic: false
/IBM/XMLServices/Response/xsd
- Description: Specifies the schema against which TCRMService
responses are validated.
- Default value: MDMDomains.xsd
- Dynamic: false
/IBM/DWLCommonServices/Security/TrustedClientMode/enabled
- Description: Specifies whether TrustedClientMode is enabled
if application security is enabled. If this is false, InfoSphere MDM will
process the requested transaction using the identity of the user who
calls the service. If this is true, InfoSphere MDM will
process the requested service using the identity that is specified
in the requesterName property of the DWLControl.
- Default value: false
- Dynamic: true
/IBM/DWLCommonServices/Security/TrustedClientMode/Batch/enabled
- Description: Specifies whether TrustedClientMode is enabled
for the Batch Framework channel if application security is enabled.
The behavior is similar to that of /IBM/DWLCommonServices/Security/TrustedClientMode/enabled.
- Default value: true
- Dynamic: true
/IBM/DWLCommonServices/Security/TrustedClientMode/EventManager/enabled
- Description: Specifies whether TrustedClientMode is enabled
for the Event Manager channel if application security is enabled.
The behavior is similar to that of /IBM/DWLCommonServices/Security/TrustedClientMode/enabled.
- Default value: true
- Dynamic: true
/IBM/DWLCommonServices/Security/TrustedClientMode/OtherChannel/enabled
- Description: Specifies whether TrustedClientMode is enabled
for other channels such as Messaging if application security is enabled.
The behavior is similar to that of /IBM/DWLCommonServices/Security/TrustedClientMode/enabled.
- Default value: true
- Dynamic: true
/IBM/DWLCommonServices/Security/TrustedClientMode/Batch/roles
- Description: Specifies the list of comma separated roles
that are authorized to run the Batch jobs in a TrustedClientMode scenario.
This configuration is applicable only if the value of /IBM/DWLCommonServices/Security/TrustedClientMode/Batch/enabled
is set to true.
- Default value: mdm_admin
- Dynamic: true
/IBM/DWLCommonServices/Security/TrustedClientMode/EventManager/roles
- Description: Specifies the list of comma separated roles
that are authorized to run the Event Manager jobs in a TrustedClientMode
scenario. This configuration is applicable only if the value of /IBM/DWLCommonServices/Security/TrustedClientMode/EventManager/enabled
is set to true.
- Default value; mdm_admin
- Dynamic: true
/IBM/DWLCommonServices/Security/TrustedClientMode/OtherChannels/roles
- Description: Specifies the list of comma separated roles
that are authorized to run the other channel jobs in a TrustedClientMode
scenario. This configuration is applicable only if the value of /IBM/DWLCommonServices/Security/TrustedClientMode/OtherChannels/enabled
is set to true.
- Default value: mdm_admin
- Dynamic: true