CmAuditDispositionPolicy Properties

The list of ActiveMarking objects currently applied to a given object. Each ActiveMarking object represents a marking that is in a MarkingSet associated with a property on the object.

An EventSet collection of the Event objects containing the audited events that have occurred for the object.

Specifies a ClassDescription object containing the fixed description (immutable metadata) of the class from which this object is instantiated.

The duration, in seconds, that the audit disposition background task should wait upon successful completion of a full sweep prior to initiating another. The audit disposition background task can only initiate a sweep if an unexpired timeslot exists; otherwise, it will wait for an available timeslot, so the total delay might be longer. A setting of 0 results in a full sweep as soon as the CmAuditingConfiguration.AuditDispositionWaitInterval is up (assuming an unexpired timeslot exists). The default value is 86,400 seconds (24 hours).

Indicates the name of the user assigned as the creator of the object.

Settability of this property is read-only for most users. For users who have been granted privileged write access (AccessRight.PRIVILEGED_WRITE), this property is settable only on create. After initial object creation, this property is read-only for all users.

Indicates the date and time the object was created. The Content Engine server stores dates and times using Coordinated Universal Time (UTC). For more information, see Timestamps.

Settability of this property is read-only for most users. For users who have been granted privileged write access (AccessRight.PRIVILEGED_WRITE), this property is settable only on create. After initial object creation, this property is read-only for all users.

Indicates the date and time the object was last modified. The Content Engine server stores dates and times using Coordinated Universal Time (UTC). For more information, see Timestamps.

Settability of this property is read-only for most users. For users who have been granted privileged write access (AccessRight.PRIVILEGED_WRITE), this property is read/write. (The read/write access for those users can only change if a change is made to the ACL on the object store that controls who has privileged write access to objects in that object store).

The user-readable, provider-specific name of an object. This property is usually the designated Name property of the object's class.

For CmAuditProcessingBookmark and AuditDefinition objects, this property is intended to identify client applications that process the audit log. For CmAuditProcessingBookmark objects, this property, in support of the audit disposition feature, identifies the client that created the object. For AuditDefinition objects, this property identifies a set of audit definitions for a given client or client functionality.

For CmAuditProcessingBookmark and AuditDefinition objects, it is recommended that you set this property. Specify a unique value to distinguish one client application from another. Note, however, that the server does not prevent identical display names across multiple CmAuditProcessingBookmark or AuditDefinition objects. Therefore, the client application is responsible for enforcing uniqueness.

Contains the expression used to identify the audited records to delete from the Event table. A disposition rule must be a fragment of a SQL WHERE-clause expression. If the value of the expression evaluates to true, the audited event is deleted.

The disposition rule is evaluated as a filter expression, and has the same syntax requirements as the FilterExpression property.

The properties referenced in a disposition rule are relative to the event object, not to the event's source object. However, you can reference source object properties that are directly on the event object, for example, the source object class or ID. You can also reference source object properties that have been added to the event as the result of Property Auditing.

Specifies an ExternalIdentityList collection of the read-only ExternalIdentity objects that represent the identities of replicas of this object in external repositories.

A representation of the Globally Unique Identifier (GUID), a unique 128-bit number, that is assigned to this Content Engine object when the object is created. When converted to a string, the Id property is typically depicted as 32 hexadecimal characters enclosed by brackets in the following format: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}. For example, {3F2504E0-4F89-11D3-9A0C-0305E82C3301}.

For User and Group classes, the Id property takes the value of the Security Identifier (SID) rather than the 128-bit GUID. The string representation of the SID is in this example format: S-1-5-21-1559522492-2815155736-3711640725-55269. When Active Directory is used as the directory service for IBM FileNet P8, calls to User.get_Id() and Group.get_Id() always return the current SID for the principal, even if this user or group has only historical SIDs populating the Active Directory server.

For a given property representation, the Id property has the following characteristics:

• PropertyDescription.get_Id() is equal to PropertyTemplate.get_Id(), which is equal to PropertyDefinition.get_PrimaryId().
• PropertyDefinition.get_Id() is not equal to PropertyDefinition.get_PrimaryId().
• PropertyDefinition.get_Id() is not equal to PropertyDescription.get_Id().

For a newly created document object, you can override the Id property of its associated VersionSeries object before you save or check in the document for the first time.

Indicates whether a given object is enabled or disabled. For example, you can globally disable or enable active events by setting an EventAction object's IsEnabled property to false (off) or true (on). Likewise, you can enable or disable a subscription, a security template, an audit definition, an audit disposition policy, a change preprocessor definition, a change preprocessor action, and a sweep. The property defaults to true.

Enabling a security template indicates that it can be applied to an object. A disabled security template remains part of its security policy container, but cannot be applied to an object. Disabling a security template is useful when you are testing or developing the security templates that make up a security policy.

Disabling a subscription prevents the code handler associated with the event from being loaded and executed. You might want to disable a subscription that is undergoing modifications due to a change in business processes, or when you do not want code procedures to execute against federated documents. Note that when you disable an EventAction, all of its associated subscriptions are also disabled. However, when you disable one particular Subscription, you only disable events that are in its subscribed event list.

Disabling a change preprocessor action has system scope, that is, it prevents code handler execution for all class definitions that reference the change preprocessor action. On the other hand, disabling a change preprocessor definition has class scope; it prevents code handler execution for only that class definition, and for any subclass definitions to which the changed property value is propagated.

Indicates the name of the user who last modified this object.

Settability of this property is read-only for most users. For users who have been granted privileged write access (AccessRight.PRIVILEGED_WRITE), this property is read/write. (The read/write access for those users could only change if a change is made to the ACL on the object store that controls who has privileged write access to objects in that object store).

The name for this object.

For most classes, this property is read-only and returns the value of the designated name property for the object, or its ID if there is no name property. If ClassDescription.NamePropertyIndex has a value, this property contains the value of the designated name property. If there is no designated name property value, and the object has an Id property, this property contains the string value of the Id property. If neither of these conditions is satisfied, this property contains an empty string.

For a ComponentRelationship object, this property is read/write and specifies the name of the object.

Manages the security owner assigned to the object.

Manages the discretionary permissions assigned to the object.

Specifies a ReplicationGroup object representing the replication group to which this replicable object belongs. For ReplicationJournalEntry objects only, this property represents the replication group to which the source object of the replication operation generating this journal entry belongs.

The current object. The primary purpose of this property is to enable the expression of relationships among objects in a Content Engine query and to select candidate objects in the query results.