To verify your installation by using the
IBM Integration Toolkit, complete the following
tasks:
- Create a Default Configuration.
- Run the Pager samples.
- (Optional) Start the Samples Preparation wizard.
- Remove the samples.
Before you can run sample programs, you must use the Default
Configuration wizard to create a broker, which has a fixed name and
properties that the samples depend on.
The Default Configuration
wizard requires that the following conditions are met:
You cannot complete the configuration and verification described
here if the previously described conditions are not met.
Use
the following instructions to complete these tasks:
- Start the IBM Integration Toolkit:
- On Windows:
On Windows, you cannot complete verification
unless you have Administrator authority; carry out verification with
the same user ID that you used to complete installation.
If
you did not launch the IBM Integration Toolkit from
the installation wizard, launch it from the Start menu,
or run the script file provided. On a command line, navigate to the
root directory of the package group and enter the following command:
launcher.bat
The
script file runs the following command; if you prefer you can use
this command yourself:
eclipse.exe -product com.ibm.etools.msgbroker.tooling.ide
- On Linux:
On Linux on x86 and Linux on x86-64, you do not need
root authority to complete verification. You cannot launch the IBM Integration Toolkit from the installation wizard
because you might experience problems during operation if you were
to create resources such as brokers when you are logged in as root,
and this option is therefore unavailable.
Log off from the user
ID with which you have installed the product. Log in as the same ID
(if ID is not root), or log in as another ID, but do not become root.
Launch
the IBM Integration Toolkit from the main menu
or run the script file provided. On a command line, navigate to the
root directory of the package group and enter the following command:
./launcher
If you prefer, you can
also run the application directly:
./eclipse -product com.ibm.etools.msgbroker.tooling.ide
However,
you must set the LD_LIBRARY_PATH before running
the application. For details about how to set LD_LIBRARY_PATH,
see the launcher script.
When you first launch the IBM Integration Toolkit,
you are asked to specify the location of your workspace. This directory
exists on your local drive, and is where the IBM Integration Toolkit stores all the resources
that you create. You can accept the default directory shown, or you
can specify your own choice either by typing it in, or by clicking Browse to
specify the location. Select Use this as the default and
do not ask again to inhibit the display of the workspace
dialog next time you launch the IBM Integration Toolkit.
The IBM Integration Toolkit opens
and the Welcome page is displayed.
- Click the Get Started icon to begin the configuration
and verification process.
The Get Started page
opens, from which you can create a default configuration that is used by a sample program
to verify that your installation is successful.
- Create the Default Configuration:
- On the Get Started page, click the link to Create
the Default Configuration. The "Creating
the Default Configuration" page opens.
- Click Start the Default Configuration wizard.
Follow the guidance provided by the wizard to navigate through
its pages.
The wizard creates a default broker that can be used
by a sample program to verify that your installation is successful.
The
wizard displays a progress bar that shows which task it is currently
performing. It also reports on all the actions that it takes by writing
progress information into a scrollable text window from which you
can copy and paste some or all of the information displayed.
The
information in the text window is also written to a log file in your
workspace directory structure. The default workspace directory is
shown in the example, but you can choose another location when you
start the IBM Integration Toolkit.
- Linux on x86 and Linux on x86-64
-
user_home_dir/IBM/IntegrationToolkit90/workspace/.metadata/
DefaultConfigurationWizard.log
- Windows
-
user_home_dir\IBM\IntegrationToolkit90\workspace\.metadata\
DefaultConfigurationWizard.log
If the wizard encounters an error in processing,
it informs you of what has happened and returns any error information,
for example a return code from a command. If you know why the error
has occurred from the error text, and can correct the situation, you
can do so now. Return to the error message display and click Yes to
continue the wizard.
If you do not understand the error, and
do not know how to fix it, click No. If the
wizard can, it rolls back all the actions that it has taken so far,
so that when it completes, your system is in the same state as it
was before you started the wizard. The text window shows you exactly
what the wizard has, and has not, done.
Click Open
Log File to access the log from the summary page of the
wizard; this option is available whether the wizard has succeeded
or failed.
The wizard creates the resources shown in the following
table.
Table 1. Resources created by the Default
Configuration wizardName |
Type |
IB9NODE |
Broker |
IB9QMGR |
WebSphere® MQ queue
manager that hosts the broker. The queue manager has a listener at
the first available port greater than or equal to 2414. |
It also starts the broker so that it is ready to process
a sample.
- On the final page, ignore the option to start the Samples
Preparation wizard; you start this wizard later in these instructions.
- Click Finish to close the wizard. When the wizard completes, it opens the Integration Development perspective and displays the resources
that the wizard has created.
- To verify
your installation, click to open the Samples and Tutorials panel. The Samples and Tutorials panel can also
be opened from the Welcome page.
- Expand Application Samples, and
click Pager Samples to open the Pager
samples page. The following options are displayed:
- Import and deploy the Pager samples
This
option starts the Samples Preparation wizard, which helps you to import
the samples into your workspace, and to deploy the samples and associated
resources (for example, message flows) to the default broker.
- Run the Pager samples
This option opens
the help page that contains a description of each of three sample
programs, and icons that you can click to start each one.
- Find out what the Pager samples do
This
option opens a page that describes in detail what the Pager samples
do and how they work. You can examine the message flows that implement
the sample function, and the messages that are handled by those flows.
- Click Import and deploy the Pager samples.
The Samples Preparation wizard starts and displays
its first page. The option to import and deploy to the default broker
is preselected.
- Click Next and follow the guidance
provided by the wizard to navigate through its pages.
The
wizard displays a progress bar that shows which task it is currently
performing. It also reports on all the actions that it takes by writing
progress information into a scrollable text window.
You can
copy and paste some or all of the information that is reported in
this text window. This information is also written to the following
log file:
- Linux on x86 and Linux on x86-64
-
user_home_dir/IBM/IntegrationToolkit90/workspace/.metadata/
samplePreparationWizard.log
- Windows
-
user_home_dir\eclipse\workspace\.metadata\
samplePreparationWizard.log
If the wizard encounters an error in processing,
it informs you of what has happened and returns any error information,
for example a return code from a command. If you know why the error
has occurred from the error text, and can correct the situation, you
can do so now. Return to the error message display and click Yes to
continue the wizard.
If you do not understand the error, and
do not know how to fix it, click No. If the
wizard can, it rolls back all the actions that it has taken so far,
so that when it completes, your system is in the same state as it
was in before you started the wizard. The text window shows you exactly
what the wizard has, and has not, done.
The wizard displays
information messages to show that the Pager samples and associated
resources are deployed and ready to run.
- Click Next when you have read
the messages about the actions that have been completed by the wizard.
The confirmation page is displayed.
- Click Finish to close the wizard.
The "Pager samples" page (from which you launched the wizard) is redisplayed.
- Click Run the Pager samples.
On the page that opens, click How to use the applications to
read about the Text Messenger and Surf report publisher applications.
When you understand what the applications do, and how to use them,
click the icon that represents the application that you want to run.
If you want more detailed information about the contents
of these applications, and how the message flows work, click Find
out what the Pager samples do.
- When you have sent and received messages successfully,
you have verified that your installation is complete. You can now
close your Pager applications and the Samples Gallery.
- (Optional) You can start the Samples Preparation wizard
to create the resources and start other supplied sample programs.
Click in the IBM Integration Toolkit,
and select Prepare the Samples. The Samples
Preparation wizard opens, and lists other samples that are available.
You can view information about samples only when you use the product documentation that is integrated with the IBM Integration Toolkit or the online product documentation. You can run samples only when you use the product documentation that is integrated with the IBM Integration Toolkit.
- To remove the sample or samples when you have finished
with them, run the Samples Preparation wizard
again and remove the samples that you have added. This action removes
the samples from the broker, and removes the sample resources from
your workspace.
When you have completed your verification
tests, run the Default Configuration wizard to
remove all the default resources. Use the same workspace and the same
user ID that you used to create the resources. To start the wizard
from the IBM Integration Toolkit, click and expand IBM Integration Bus - Default Configuration and Samples. Select Create
the Default Configuration and click Next.
You have completed the tutorial.