Commands
Table 1 lists the new and changed SNA commands.
For complete information about SNA commands, refer to the z/OS Communications Server: SNA Operation.
Command | Release | Description | Reason for change |
---|---|---|---|
DISPLAY EE | V2R1 | Added a new CPNAME filter. | Serviceability Enhancements |
DISPLAY TRL | V2R2 | A new value is defined for the CONTROL parameter. Specifying CONTROL=ISM displays all the internal shared memory (ISM) TRLEs. | Shared Memory Communications - Direct Memory Access |
V2R1 | If the TRLE represents an OSA-Express in QDIO mode or in Hipersockets device, the display includes an additional message (IST2386I). | QDIO outbound flood prevention | |
V2R1 | A new value is defined for the CONTROL parameter. Specifying CONTROL=RoCE displays all the 10 GbE RoCE Express TRLEs. | Shared Memory Communications over Remote Direct Memory Access | |
V2R1 | A new DEVSTATS operand is accepted. Specifying DEVSTATS=YES requests that VTAM obtain and display operational statistics for a 10 GbE RoCE Express TRLE. | Shared Memory Communications over Remote Direct Memory Access | |
MODIFY CSDUMP | V2R1 | The RNICTRLE operand is changed to accept the value MSGVALUE. Specifying RNICTRLE=MSGVALUE requests that VTAM take a diagnostic dump of the 10 GbE RoCE Express interface identified in message IST2391I, IST2406I, or IST2419I. This diagnostic dump is taken in addition to any other requested diagnostic information. | Shared Memory Communications over RDMA adapter (RoCE) virtualization |
V2R1 | A new RNICTLE operand is accepted. Specifying RNICTRLE requests that VTAM take a 10 GbE RoCE Express diagnostic dump of the 10 GbE RoCE Express interface represented by RNICTRLE in addition to any other diagnostic information requested. | Shared Memory Communications over Remote Direct Memory Access | |
MODIFY TOPO | V1R13 | A new value, FUNCTION=CLRTREES, clears APPN routing trees. You should use this function only when advised by IBM service to do so. | Improved APPN routing resilience |
MODIFY TRACE | V2R1 | The maximum value of the BFRNUM operand when TYPE=ROUTE is specified is increased from 100 to 500 to allow up to 500 40K buffers for the APPN route selection trace. | SNA serviceability enhancements |
MODIFY VTAMOPTS | V2R2 with APAR OA49911 V2R1 with APAR OA48802 |
You can modify the values for DSACTION, DSCOUNT, DSMONITR, and DSTRUST start options. | VTAM 3270 intrusion detection services |
MODIFY VTAMOPTS | V2R1 | Changed to accept an IPv6 address or an IPv4 address for the IPADDR start option. | Enterprise Extender IPv6 address configuration |