.-AUTHLEN--=--YES-----.
>>-name--PU--+---------------------+---------------------------->
'-AUTHLEN--=--+-NO--+-'
'-YES-'
.-CAPACITY--=--32M------------.
>--+-----------------------------+------------------------------>
'-CAPACITY--=--number_of_bits-'
.-CONNTYPE--=--value_of_conntype_start_option-----.
>--+-+-------------------------------------------------+-+------>
| | .-value_of_conntype_start_option-. | |
| '-CONNTYPE--=--+--------------------------------+-' |
| +-APPN---------------------------+ |
| '-LEN----------------------------' |
| .-CONNTYPE--=--APPN-. (1) |
'-+-------------------+-------------------------------'
'-CONNTYPE--=--APPN-'
.-COSTBYTE--=--0-------------.
>--+----------------------------+------------------------------->
'-COSTBYTE--=--cost_per_byte-'
.-COSTTIME--=--0------------------.
>--+---------------------------------+-------------------------->
'-COSTTIME--=--cost_per_unit_time-'
(3)
.-CPCP--=--value_of_cpcp_start_option-----.
| (2) |
+-CPCP--=--YES----------------------------+
>--+-----------------------------------------+------------------>
| .-value_of_cpcp_start_option-. |
| +-YES------------------------+ |
'-CPCP--=--+----------------------------+-'
+-NO-------------------------+
'-YES------------------------'
>--+-------------------------------+---------------------------->
'-CPNAME--=--control_point_name-'
.-DELAY--=--.2------------.
>--+---------------------------+--+-------------------------+--->
'-CUADDR--=--device_address-' '-DELAY--=--timeout_value-'
.-DISCNT--=--(--NO--)--------------.
>--+----------------------------------+------------------------->
| .-(--NO--)----------. |
'-DISCNT--=--+-| DISCNT values |-+-'
.-DYNADJCP--=--value_of_dynadjcp_start_option-----.
>--+-+-------------------------------------------------+-+------>
| | .-value_of_dynadjcp_start_option-. | |
| '-DYNADJCP--=--+--------------------------------+-' |
| +-NO-----------------------------+ |
| '-YES----------------------------' |
| .-DYNADJCP--=--YES-. (4) |
'-+------------------+--------------------------------'
'-DYNADJCP--=--YES-'
.-DYNLU--=--value_of_dynlu_start_option-----.
>--+-+-------------------------------------------+-+------------>
| | .-value_of_dynlu_start_option-. | |
| '-DYNLU--=--+-----------------------------+-' |
| +-NO--------------------------+ |
| '-YES-------------------------' |
| .-DYNLU--=--YES-. (5) |
'-+---------------+-----------------------------'
'-DYNLU--=--YES-'
.-ENCR--=--NONE-----. .-ENCRTYPE--=--DES----.
>--+-------------------+--+---------------------+--------------->
| .-NONE-. | '-ENCRTYPE--=--TDES24-'
'-ENCR--=--+------+-'
+-OPT--+
+-REQD-+
'-SEL--'
.-HPR--=--YES-----. .-INCLUD0E--=--NO------.
>--+-----------------+--+----------------------+---------------->
'-HPR--=--+-NO--+-' '-INCLUD0E--=--+-NO--+-'
'-YES-' '-YES-'
.-ISTATUS--=--ACTIVE-------. .-LIMRES--=--NO------.
>--+--------------------------+--+-+--------------------+-+----->
| .-ACTIVE---. | | | .-NO--. | |
'-ISTATUS--=--+----------+-' | '-LIMRES--=--+-----+-' |
'-INACTIVE-' | '-YES-' |
| .-LIMRES--=--NO-. (6) |
'-+---------------+------'
'-LIMRES--=--NO-'
>--+----------------------------------------------------------+-->
+-LUGROUP--=--lu_group_name--------------------------------+
'-LUGROUP--=--lu_group_name--,--LUSEED--=--lu_pattern_name-'
(8)
.-MAXBFRU--=--5-----------------.
| (7) |
+-MAXBFRU--=--1-----------------+
>--+-------------------------------+---------------------------->
'-MAXBFRU--=--number_of_buffers-'
(10)
.-MAXDATA--=--265-------------.
| (9) |
+-MAXDATA--=--261-------------+
>--+-----------------------------+--+--------------------+------>
'-MAXDATA--=--number_of_bytes-' '-NATIVE--=--+-NO--+-'
'-YES-'
>--+------------------------+--+----------------+--------------->
+-NETID--=--(network_id)-+ '-NN--=--+-NO--+-'
'-NETID--=--(,NOXNETLS)--' '-YES-'
.-PDELAY--=--TERRESTR------.
| (11) |
+-PDELAY--=--NEGLIGIB------+
>--+--------------------------+--+--------------+--------------->
| .-TERRESTR-. | '-PUTYPE--=--2-'
'-PDELAY--=--+----------+--'
+-LONG-----+
+-NEGLIGIB-+
'-PACKET---'
.-SECNET--=--NO------. .-SECURITY--=--UNSECURE-----.
>--+--------------------+--+---------------------------+-------->
| .-NO--. | | .-UNSECURE-. |
'-SECNET--=--+-----+-' '-SECURITY--=--+----------+-'
'-YES-' +-PUBLIC---+
+-UNDERGRO-+
+-SECURE---+
+-GUARDED--+
+-ENCRYPT--+
'-SHIELDED-'
.-TGN--=--ANY-----------.
>--+--------------------+--+-----------------------+------------>
'-SPAN--=--span_name-' | .-ANY-------. |
'-TGN--=--+-----------+-'
'-tg_number-'
>--+------------------+--+------------------+------------------->
'-TGP--=--tgp_name-' '-TOPO--=--CONNECT-'
>--+------------------------+----------------------------------->
'-TRLE--=--+-trle_name-+-'
'-*---------'
.-UPARM1--=--128------------------------.
>--+---------------------------------------+-------------------->
'-UPARM1--=--user-defined_operand_value-'
.-UPARM2--=--128------------------------.
>--+---------------------------------------+-------------------->
'-UPARM2--=--user-defined_operand_value-'
.-UPARM3--=--128------------------------.
>--+---------------------------------------+-------------------->
'-UPARM3--=--user-defined_operand_value-'
.-VERALSID--=--NO------. .-XID--=--NO------.
>--+-+----------------------+-+--+-----------------+------------>
| | .-NO--. | | | .-NO--. |
| '-VERALSID--=--+-----+-' | '-XID--=--+-----+-'
| '-YES-' | '-YES-'
| .-VERALSID--=--NO-. (12) |
'-+-----------------+------'
'-VERALSID--=--NO-'
.-XNETALS--=--value_of_XNETALS_start_option-.
>--+-------------------------------------------+---------------><
'-XNETALS--=--+-NO--+-----------------------'
'-YES-'
DISCNT values
.-,--F--.
|--(--YES--+-------+--)-----------------------------------------|
'-,--NF-'
Notes:
- CONNTYPE=APPN is the only valid value if the TRLE operand
is coded.
- CPCP defaults to YES for the model RTP PU.
- CPCP defaults to the value of the CPCP start options for
all PUs except the model RTP PU.
- DYNADJCP=YES is the only valid value if the TRLE operand
is coded.
- DYNLU=YES is the only valid value if the TRLE operand is
coded.
- LIMRES=NO is the only valid value if the TRLE operand is
coded.
- MAXBFRU defaults to 1 when HPR=NO, XID=NO, CONNTYPE=LEN,
or the VTAM node is not HPR capable.
- MAXBFRU defaults to 5 when HPR=YES, XID=YES, CONNTYPE=APPN,
and the VTAM node is HPR capable.
- MAXDATA defaults to 261 when PUTYPE=1 is coded.
- MAXDATA defaults to 265 when PUTYPE=2 is coded.
- NEGLIGIB is the default if the TRLE operand is coded.
- VERALSID=NO is the only valid value if the TRLE operand is
coded.