IST571I

Explanation
 After loading a PU type 2, VTAM® receives an NS_LOADSTAT request unit that
indicates whether or not the load was completed successfully. VTAM issues this message when it
receives an NS_LOADSTAT that indicates that the load was not completed
successfully.
 puname is the name of the
physical unit that requested the load.  When ru is IPL INIT, IPL TEXT,
or IPL FINAL, the requested load failed during the load procedure.
When the failing network services request unit ru is INITLOAD,
the load failed because the application program could not process
the load request.

 code is the sense code and provides
additional information about the reason for the failure. See the z/OS Communications Server: IP and SNA Codes for a description of code.
 Note: When ru is ***NA***, code is
08000000 (request rejected) and the failing request is not available.
(The request and sense information were not included in the NS_LOADSTAT
RU.)

System action
 The system action depends upon the time at which
the load was requested. If the load was requested during activation
of the physical unit, VTAM deactivates
the PU. Another message will signal completion of the deactivation
processing. If the load was requested after the PU was activated, VTAM will take no action.

Operator response
 Try activating the physical unit again if
load failure caused the physical unit to be     deactivated. Otherwise,
no response is required. If the problem persists, check the PU hardware
    for possible problems.

System programmer response
 None.

Routing code
 2

Descriptor code
 5 