VTAM® issues
this message as part of a group of messages in response to a DISPLAY
ID command for:
An external communication adapter (XCA) major node that defines
an ATM native port.
A remote node connected through an ATM native switched virtual
channel (SVC).
A complete description of the message group follows the
example.
IST1559I ATM ADDRESS TYPE FORMAT
IST1553I atm_address address_type address_format
IST1559I
Message IST1559I is a header line identifying information in
subsequent occurrences of message IST1553I.
IST1553I
For an XCA major node, address_type can be
LOCAL or GATEWAY.
LOCAL atm_address is the address, in hexadecimal,
of a local IBM® Open Systems
Adapter port defined by the XCA major node.
GATEWAY atm_address is the public E164 address,
in decimal, through which a local IBM Open
Systems Adapter port can be reached.
For a remote node connected through an ATM native SVC, address_type can
be LOCAL or REMOTE.
LOCAL atm_address is the address, in decimal,
of the local IBM Open Systems
Adapter port through which the remote node is connected.
REMOTE atm_address is the address, in decimal,
of the remote node.
address_format can be one of the following:
E164
Indicates that the address is in a public ATM network and is in
the native E164 address format.
NSAP
Indicates that the address is in a private ATM network and is
in the International Organization for Standardization (ISO) network
service access point (NSAP) address format.
Note: An *NA* in all three fields of the message indicates that
an address is not available, most probably because a line defined
in the XCA major node was not activated.