Number of configurations: numofconfig
Replication Session: replsession_name
Socket Port: socknumb
New member configuration load failed: loadpolicy
Planned swap recovery: plannedswappolicy
Unplanned swap recovery: unplannedswappolicy
FreezeAll: {Yes|No}
Stop: {Yes|No}
Swap Highest Priority: {Yes|No}
Disallow Non-MultiTarget System: {Yes|No}
HyperSwap enabled  | HyperSwap enabled with
Metro Global Mirror [pending] 
HyperSwap enabled with limited capability:
HyperSwap disabled:
  By operator
  No configuration data
  Couple data set in configuration
  Member failed configuration data validation
  HyperSwap is not started on at least one member
  HyperSwap in progress 
  Configuration data load in progress
HyperSwap not started
HyperSwap not initialized
system_name
reason2
  Configuration load failed 
  API function failed during swap processing
HyperSwap in progress phase
Hyperswap programmatically blocked by application
named applname
  Configuration data purge in progress 
  Member terminating
  Unable to verify PPRC status
  One or more members unable to verify PPRC
  secondary device connectivity
  Member unable to verify PPRC secondary device
  connectivity
Couple Data Set in configuration
Hyperswap enabled with limited capability
New Member configuration load failed: {Disable|Partition}
Planned swap recovery: {Partition|Disable}
Unplanned swap recovery {Disable|Partition}
FreezeAll: {No|Yes}
Stop: {Yes|No}

numofconfig

Number of active HyperSwap® configurations.

replsession_name

The name of the replication session.

socknumb

The socket number on which Basic HyperSwap will listen.

loadpolicy

One of the following:

Disable

Alternate policy setting

Partition

Default policy setting

plannedswappolicy

One of the following:

Disable

Alternate policy setting

Partition

Default policy setting

unplannedswappolicy

One of the following:

Disable

Alternate policy setting

Partition

Default policy setting

FreezeAll

Indicates whether or not a Freeze will be issued when a suspended PPRC link is detected or requested.

Yes

Freeze is issued to all LSSs in the configuration.

No

UnFreeze is issued instead of Freeze to the LSS with the suspended PPRC link.

Stop

Inhibit I/O to all DASD devices in the configuration when a suspended PPRC link is detected or requested.

Yes

I/O is inhibited to all DASD devices in the configuration.

No

I/O is not inhibited to all DASD devices in the configuration.

Swap Highest Priority

Indicates whether the HyperSwap configuration with the highest priority will be used for unplanned HyperSwap.

Yes

Perform the unplanned HyperSwap using the HyperSwap configuration with the highest priority, even though it is not the current preferred configuration because more systems will be removed from the sysplex as a result of the HyperSwap as compared to another capable configuration.

No

Perform the unplanned HyperSwap using the currently preferred configuration.

Disallow Non-MultiTarget System

Indicates whether a system that is not capable of supporting Multi-target PPRC will be allowed to join the sysplex after HyperSwap configurations have been successfully loaded to form a multi-target environment. A system is considered not capable of supporting Multi-target PPRC if it is at a z/OS® level earlier than z/OS 1.13, or it is at z/OS 1.13 or z/OS 2.1 but does not have the PTFs for APARs OA44240 and OA46683 installed.

Yes

A system that is not capable of supporting Multi-target PPRC will not be allowed to join the sysplex if a multi-target environment has been established (that is, multiple HyperSwap configurations with the same primary device set have been loaded successfully by existing systems in the sysplex).

No

A system that is not capable of supporting Multi-target PPRC will be allowed to join the sysplex. However, the system will be removed from the sysplex if an unplanned HyperSwap is performed using the HyperSwap configuration that has not been loaded by that system.

HyperSwap enabled with Metro Global Mirror [pending]

Basic HyperSwap is currently enabled for HyperSwap for the Metro Mirror session session_name. When an unplanned HyperSwap is triggered or a planned Hyperswap is requested by the operator, Freeze and UnFreeze is also issued to the Global Mirror session. If 'pending' is included in the message text, Basic HyperSwap is currently unable to obtain information for the devices in the GM session, but it continues to attempt the query for the information.

HyperSwap enabled with limited capability

HyperSwap is enabled for unplanned HyperSwap, but some systems may not be able to perform HyperSwap processing.

system_name

Sysplex member name

reason2

One of the following:

HyperSwap API not started

Basic HyperSwap API Services address space is not started

HyperSwap API not active

Basic HyperSwap API Services address space is not active

phase

One of the following:

- Connectivity validation

HyperSwap Validation phase is active

- Freeze and quiesce I/O

HyperSwap Freeze and quiesce DASD I/O phase is active

- End PPRC

HyperSwap Failover PPRC phase is active

- Swap UCBs

HyperSwap swap UCBs phase is active

- Resume I/O

HyperSwap Resume DASD I/Os phase is active

applname

Name of application blocking HyperSwap.

Disable

Alternate policy setting.

Partition

Default policy setting.

No

No Freeze issued.

Yes

Freeze all LSSes.