Explanation
Communication with the encryption key manager (EKM)
has failed to retrieve the key after a predetermined time limit.
In
the message text:
- dddd
- The device number.
- text
- The text can be one of the following reasons:
- KEY MANAGER NOT SPECIFIED
- A key manager was not specified at the time of key exchange.
- SOCKET FAILURE RETVAL=retval ERRNO=errno ERRNOJR=errnojr
- Encryption key manager processing failed to open a TCP/IP connection
to the encryption key manager. retval, errno and errnojr are
the return values from the USS service that failed.
- CONNECTION FAILURE SOCKET ERNO=xxxx
- Encryption key manager processing failed to open a TCP/IP connection
to the encryption key manager. xxxx is the return
code from the USS service that has failed.
- COMMUNICATION TIME OUT
- Encryption key manager processing communication reached a TCP/IP
timeout.
- INCORRECT DATA RECEIVED
- There was an internal error communicating with the encryption
key manager and the tape drive.
- IO ERROR
- An unrecoverable I/O error was encountered.
- USS FAILURE
- A failure in using USS services has prevented encryption.
- ENCRYPTION STATUS NOT RETURNED
- A hardware error has occurred. A key exchange was requested,
however the encryption status message was not returned by the control
unit.
- PIN FAILURE
- A software error has occurred.
- OMVS SEGMENT FAILURE FOR IOSAS
- The IOS address space (IOSAS) has determined that USS services
could not be used due to a lack of permissions for IOSAS.
System action
The system will still attempt connections with
the primary or secondary host names in case the error is temporary.
Operator response
If the host name is in error, issue a SETIOS
EKM command to specify a correct encryption key manager or NONE to
disable in-band key management. Contact the system programmer to verify
that the encryption key manager is currently running and TCP/IP and
USS work correctly.
System programmer response
Source
Input/output supervisor (IOS)
Routing code
Descriptor code