ARC0430I

Explanation
 The TAPECOPY or TAPEREPL command
has failed without performing all of the requested tape copies.
 The
reason codes are: 1
The EXPDT and RETPD subparameters are both specified. Only one
can be specified at a time.
2
The expiration date is invalid. Possible reasons may be one of
the following:  The number of digits is not 5 or 7
The day value is less than 1 or greater than 366
The day value 366 is specified, but the year is not a leap year
The date is after 2155
The date is in the past
The date is specified as yyddd, but the current
date is after 1999

4
RETPD exceeds the century because year 2000 support is not available
in MVS™ or RETPD exceeds year
2155 (MVS limit).
6
The list of volumes specified with the ORIGINALVOLUMES and ALTERNATEVOLUMES
parameters do not contain the same number of volumes.
7
I/O error has occurred on INDATASET.
8
No input volume list has been found.
9
INDATASET allocation has failed. Another DFSMShsm message accompanies
this reason code providing more information.
10
Multiple volume list sources are given.
11
ALTERNATEVOLUMES has been specified without ORIGINALVOLUMES.
12
All volumes in the list supplied with the command are invalid.
13
A HOLD command has been issued for the TAPECOPY or TAPEREPL command
while the command is in progress. Some volumes may not have been processed.
14
There has been more than one abnormal end (abend) for the ARCCPCTS
subtask. This message indicates that either the DFSMShsm virtual storage has
been exceeded or there is an internal DFSMShsm logic error. Some volumes may not
have been processed. Another DFSMShsm message accompanies this reason
code providing more information.
15
The command contains a syntax error and could not be processed.
16
Input tape unit allocation has failed. Another DFSMShsm message will accompany
this reason code providing more information.
17
Output tape unit allocation has failed. Another DFSMShsm message will accompany
this reason code providing more information.
19
ARCCPCTS subtask attach has failed. This message indicates that
either the DFSMShsm virtual
storage has been exceeded or there is an internal DFSMShsm logic error. Another DFSMShsm message
accompanies this reason code providing more information. The abend
and associated system control blocks are traced using the problem
determination aid function.
20
An error has occurred positioning to the first volume record in
the MCDS or BCDS.
21
An error has occurred reading a volume record from the MCDS or
BCDS.
23
The ALTERNATEUNITNAME parameter has been specified, but the unit
type has not been specified.
24
The ALTERNATEUNITNAME parameter has been specified, and the unit
type is incorrect.
25
The unit type specified in the UUT does not match the specified
ALTERNATEUNITNAME unit type.
26
The UUT has not been defined or cannot be accessed.
27
The hardware compaction of the original unit is not compatible
with the ALTERNATEUNITNAME unit type specified.
29
More than the allowable number of alternate units has been specified.
30
An error has been encountered in determining if a storage class
is assigned to the output tape copy data set name.
31
An error has been encountered in reading the tape library volume
record for an OVOL or an AVOL. 
32
The ALTERNATE3590UNITNAME parameter has been specified, but the
unit type has not been specified.
33
More than the allowable number of alternate units has been specified
for the ALTERNATE3590UNITNAME parameter.
34
The unit type specified in the UUT does not match the specified
ALTERNATE3590UNITNAME unit type.
35
The ALTERNATE3590UNITNAME parameter has been specified, but the
unit type is incorrect.
36
The UUT has not been defined or cannot be accessed for the ALTERNATE3590UNITNAME
parameter.

System action
 The TAPECOPY or TAPEREPL command ends, except
that TAPECOPY continues to process the next volume if the requested
volume is unavailable (ARC0500I DARC=0220) and the input tape allocation
has failed (ARC0430I RS=16). For all reason codes except 13, 14, 19,
and 21, no tapes have been copied. Reason codes 13, 14, 19 and 21
can result in a subset of the requested copies being made.

System programmer response
 For all but reason codes 14 and 19,
correct the problem and reissue the TAPECOPY or TAPEREPL command to
process the volumes.
 For reason code 13, issue a RELEASE command
and reissue a TAPECOPY or TAPEREPL command for the volumes not processed.
 For
reason codes 14 and 19, search problem reporting databases for a fix
for the problem. If no fix exists, contact the IBM® Support Center.

Source
 DFSMShsm