ANTP0096I
cquery_unformat_paths_message

Explanation

A CQUERY UNFORMAT PATHS request has been made. This is a block message defined by the cquery_unformat_paths_message field, and consists of the following lines:
  • Line 1 
    timestamp job_number ANTP0096I CQUERY
 UNFORMATTED LVL 2 connect_message_number C
    Note: The connect_message_number is written to SYSLOG only. The C is written to the console only.
  • Line 2 
     PATHS REPORT
  • Line 3 
    prim_ctl_unit_ser_num,
prim_ctl_unit_subsys_ident(SSID)
prim_ctl_unit_type
  • Line 4 
    first_secondary_ctl_unit_ser_num,
first_sec'y_ctl_unit_subsys_ident(SSID),
first_sec'y_ctl_unit_num_paths_established,
first_sec'y_ctl_unit_path_#1_said/dest,
first_sec'y_ctl_unit_path_#1_status_code,
first_sec'y_ctl_unit_path_#2_said/dest,
first_sec'y_ctl_unit_path_#2_status_code,
first_sec'y_ctl_unit_path_#3_said/dest,
first_sec'y_ctl_unit_path_#3_status_code,
first_sec'y_ctl_unit_path_#4_said/dest,
first_sec'y_ctl_unit_path_#4_status_code
  • Line 4a (optional line displayed only if the value of first_sec'y_ctl_unit_num_paths_established in line 4 is greater than 4)
    first_sec'y_ctl_unit_path_#5_said/dest,
first_sec'y_ctl_unit_path_#5_status_code,
first_sec'y_ctl_unit_path_#6_said/dest,
first_sec'y_ctl_unit_path_#6_status_code,
first_sec'y_ctl_unit_path_#7_said/dest,
first_sec'y_ctl_unit_path_#7_status_code,
first_sec'y_ctl_unit_path_#8_said/dest,
first_sec'y_ctl_unit_path_#8_status_code
  • Line 5 
    second_secondary_ctl_unit_ser_num,
second_sec'y_ctl_unit_subsys_ident(SSID),
second_sec'y_ctl_unit_num_paths_established,
second_sec'y_ctl_unit_path_#1_said/dest,
second_sec'y_ctl_unit_path_#1_status_code,
second_sec'y_ctl_unit_path_#2_said/dest,
second_sec'y_ctl_unit_path_#2_status_code,
second_sec'y_ctl_unit_path_#3_said/dest,
second_sec'y_ctl_unit_path_#3_status_code,
second_sec'y_ctl_unit_path_#4_said/dest,
second_sec'y_ctl_unit_path_#4_status_code
  • Line 5a (optional line displayed only if the value of second_sec'y_ctl_unit_num_paths_established in line 5 is greater than 4)
    second_sec'y_ctl_unit_path_#5_said/dest,
second_sec'y_ctl_unit_path_#5_status_code,
second_sec'y_ctl_unit_path_#6_said/dest,
second_sec'y_ctl_unit_path_#6_status_code,
second_sec'y_ctl_unit_path_#7_said/dest,
second_sec'y_ctl_unit_path_#7_status_code,
second_sec'y_ctl_unit_path_#8_said/dest,
second_sec'y_ctl_unit_path_#8_status_code
  • Line 6 
    third_secondary_ctl_unit_ser_num,
third_sec'y_ctl_unit_subsys_ident(SSID),
third_sec'y_ctl_unit_num_paths_established,
third_sec'y_ctl_unit_path_#1_said/dest,
third_sec'y_ctl_unit_path_#1_status_code,
third_sec'y_ctl_unit_path_#2_said/dest,
third_sec'y_ctl_unit_path_#2_status_code,
third_sec'y_ctl_unit_path_#3_said/dest,
third_sec'y_ctl_unit_path_#3_status_code,,
third_sec'y_ctl_unit_path_#4_said/dest,
third_sec'y_ctl_unit_path_#4_status_code
  • Line 6a (optional line displayed only if the value of third_sec'y_ctl_unit_num_paths_established in line 5 is greater than 4)
    third_sec'y_ctl_unit_path_#5_said/dest,
third_sec'y_ctl_unit_path_#5_status_code,
third_sec'y_ctl_unit_path_#6_said/dest,
third_sec'y_ctl_unit_path_#6_status_code,
third_sec'y_ctl_unit_path_#7_said/dest,
third_sec'y_ctl_unit_path_#7_status_code,,
third_sec'y_ctl_unit_path_#8_said/dest,
third_sec'y_ctl_unit_path_#8_status_code
  • Line 7
    fourth_secondary_ctl_unit_ser_num,
fourth_sec'y_ctl_unit_subsys_ident(SSID),
fourth_sec'y_ctl_unit_num_paths_established,
fourth_sec'y_ctl_unit_path_#1_said/dest,
fourth_sec'y_ctl_unit_path_#1_status_code,
fourth_sec'y_ctl_unit_path_#2_said/dest,
fourth_sec'y_ctl_unit_path_#2_status_code,
fourth_sec'y_ctl_unit_path_#3_said/dest,
fourth_sec'y_ctl_unit_path_#3_status_code,
fourth_sec'y_ctl_unit_path_#4_said/dest,
fourth_sec'y_ctl_unit_path_#4_status_code
  • Line 7a (optional line displayed only if the value of fourth_sec'y_ctl_unit_num_paths_established in line 5 is greater than 4)
    fourth_sec'y_ctl_unit_path_#5_said/dest,
fourth_sec'y_ctl_unit_path_#5_status_code,
fourth_sec'y_ctl_unit_path_#6_said/dest,
fourth_sec'y_ctl_unit_path_#6_status_code,
fourth_sec'y_ctl_unit_path_#7_said/dest,
fourth_sec'y_ctl_unit_path_#7_status_code,
fourth_sec'y_ctl_unit_path_#8_said/dest,
fourth_sec'y_ctl_unit_path_#8_status_code
  • Line 8-9 (or lines 7-8 if number_of_paths_established in line 5 is less than 5)

    For 2105 storage control device information, the following fields will be displayed: 

    primary_wwnn, 
  secondary1_wwnn, 
  secondary2_wwnn, 
  secondary3_wwnn, 
  secondary4_wwnn

See the topic titled Managing Peer to Peer Remote Copy Operations in z/OS DFSMS Advanced Copy Services for more information about these fields.

System action

None.

System programmer response

None.

Source

Peer-to-peer remote copy (PPRC).

Parent topic: ANT messages