Explanation
The FlashCopy® FCWITHDR command was issued and
the source device
sdevn is not the source device
in an active FlashCopy relationship
with the target device
tdevn.
sdevn can
be:
- z/OS® device number
- Serial_number-lss-lun of the secondary of a
PPRC pair and source in the FlashCopy remote
request
- Serial_number-lss-lun of a Fixed Block device
in an OPEN device request
tdevn can be:
- z/OS device number
- Serial_number-lss-cca of the CKD target of
the FlashCopy remote request
- Serial_number-lss-lun of a Fixed Block target
device in the FlashCopy OPEN
request
System action
System programmer response
Ensure that the source device and
target device are correct. Use the FCQUERY command to determine if
the source device is in an active FlashCopy relationship
with the target device. Reenter the command after correcting any errors.
This command can fail because the source and target devices are in
active FlashCopy relationships,
but not with each other. Check to make sure that the source and target
devices are not reversed.
Source