Explanation
This message provides the report details for the
output of the XQUERY command for a storage control features report.
It is associated with header messages ANTQ8256I and ANTQ8257I. The
report shows the status of the storage control sessions within an
XRC session.
- ssid –
- Identifies the storage subsystem ID associated with the specified
storage control session.
- scsn –
- Identifies the storage control session name assigned by the user.
- scid –
- Identifies the session ID assigned by the storage control to the
storage control session. If it cannot be determined it is reported
as "**".
- status –
- Provides the status of the storage control session when the command
was issued. Optimal performance is indicated when the field is blank
(session is active). The status can be one of the following:
- (blank) – Active
- B – One or more devices on this primary storage control
has exceeded the maximum number of record sets that are allowed for
a storage control session.
- D – One or more devices on this primary storage control
is being blocked.
- E – I/O error obtaining status from the storage control
- L – Long busy condition
- N – Storage control session is not found
- Q – Quiesced
- R – Utility device is reserved by this system
- S – Suspended session
- T – Storage control session has timed out
- U – Unable to determine utility volume for the storage
control
- & – Utility device is reserved by another system
- 1 – Record update I/O has 1 storage control path
blocked
- 2 – Record update I/O has 2 storage control paths
blocked
- 3 – Record update I/O has 3 storage control paths
blocked
- 4 – Record update I/O has 4 storage control paths
blocked
- lss –
- Identifies the logical subsystem the session ID is contained in.
- serial_number –
- Specifies the serial number of the storage control.
- lic_level –
- Specifies the licensed internal code (microcode) level.
- features –
- Specifies capability and enablement status of selected functions.
- –
- Microcode not capable
- Y
- Function enabled
- N
- Function disabled
The features are:
- FU
- Fixed Utility (microcode and software function)
- D
- Device Blocking
- W
- Write pacing
- SL
- Suspend On Long Busy (microcode and software function)
- ER
- Enhanced Reader Support
- First position - hardware microcode capable ('-' or 'Y' only).
- Second position - AllowEnhancedReader is ON/OFF ('Y'/'N', respectively).
- EX
- Extended manufacturer
- '–' = Standard IBM® channel connection
- 'ED' = IBM Extended Distance FICON® channel
- 'CN' = Brocade CNT channel extender
- 'CS' = Cisco channel extender
- IR
- Incremental Resync
- The status indicator is for microcode capability only ('-' or 'Y' only)
System action
XRC functions are active.
System programmer response
If the command has been accepted and
this message has not been displayed at either the system console log
or at the user ID specified by the MSGROUTEID parameter, see message
ANTT0099I.
Source
Extended remote copy (XRC).