ANTF0330I
FLASHCOPY command SOURCE DEVICE sdevn NOT IN SUBSYSTEM OF TARGET DEVICE tdevn

Explanation

The FlashCopy® command was specified with a source device sdevn and the target device tdevn that do not meet the logical subsystem requirement. sdevn can be:
  • z/OS® device number
  • Serial_number-lss-cca of the CKD secondary of a PPRC pair and source in the FlashCopy remote request
  • Serial_number-lss-lun of a Fixed Block device in an OPEN device request
tdevn can be:
  • z/OS device number
  • Serial_number-lss-cca of the CKD target of the FlashCopy remote request
  • Serial_number-lss-lun of a Fixed Block target device in the FlashCopy OPEN request

The FlashCopy command command was issued in an environment that does not have accessibility to FlashCopy Version 2 functions. FlashCopy Version 1 requires that the source and target devices must exist in the same logical subsystem (lss). If the FlashCopy command was issued in an environment that does have accessibility to FlashCopy Version 2 or greater functions, the source and target devices must exist on the same storage control, any lss within the storage control.

System action

The command is rejected.

System programmer response

Use the FCQUERY command to determine the status of the source and target devices. Verify that the devices are in the appropriate logical subsystem (LSS) as indicated in the Explanation topic. Verify that sdevn and tdevn are the correct device numbers and reenter the command.

Source

ESS FlashCopy.

Parent topic: ANT messages