0 |
None. |
Meaning: If you specified a MODE value of ASYNCECB,
ASYNCEXIT, ASYNCTOKEN, or ASYNCNORESPONSE, the request has been successfully
initiated. The answer area (ANSAREA) fields will not contain valid
information until the asynchronous processing has completed. For any
other MODE value, the request has successfully completed. Action: - If you specified MODE=ASYNCECB, wait on the ECB you specified
in REQECB.
- If you specified MODE=ASYNCEXIT, the connection's complete exit
will be given control when the request has completed.
- If you specified MODE=ASYNCTOKEN, use REQTOKEN when calling IXLFCOMP
to determine when the request has completed.
|
4 |
xxxx0402 |
Equate Symbol: IXLRSNCODEASYNCH Meaning: The
request could not be processed synchronously. It will be processed
asynchronously. The answer area (ANSAREA) fields will not contain
valid information until the asynchronous processing has completed.
- If MODE=SYNCECB was specified, the ECB specified for REQECB will
be posted when the request has finished.
- If MODE=SYNCEXIT was specified, the connection's complete exit
will be given control when the request has finished.
- If MODE=SYNCTOKEN was specified, an asynchronous request token
was returned in the area specified by REQTOKEN. This request token
may be specified on the IXLFCOMP macro to determine when the request
has finished.
Action: - If you specified MODE=SYNCECB, wait on the ECB you specified in
REQECB.
- If you specified MODE=SYNCEXIT, the connection's complete exit
will be given control when the request has completed.
- If you specified MODE=SYNCTOKEN, use REQTOKEN when calling IXLFCOMP
to determine when the request has completed.
|
4 |
xxxx0409 |
Equate Symbol: IXLRSNCODETIMEOUT Meaning: The
request completed prematurely because it exceeded the coupling facility
model-dependent time-out criteria. The following information has been
returned in the answer area: - The number of entries that were deleted (field LAADELCNT)
- A token for restarting the request (field LAARESTOKEN or LAAEXTRESTOKEN)
Action: Reissue the request using the restart
token (RESTOKEN or EXTRESTOKEN). For more information about premature
completion, see z/OS MVS Programming: Sysplex Services Guide.
|
4 |
xxxx0410 |
Equate Symbol: IXLRSNCODELOCKCOND Meaning: For
a LOCKOPER=HELDBY request, or a LOCKMODE=COND request, or a request
that specified LOCKCOMP, the request could not be completed successfully
because the specified lock is not currently held as required. The
connection identifier of the lock owner is returned in the answer
area (LAACONID field).
Action: Retry the request, or
obtain the lock as required, and retry the request. If you are unable
to get the lock, check the ID in the LAACONID field and determine
if some recovery is necessary.
|
4 |
xxxx0412 |
Equate Symbol: IXLRSNCODELOCKHELDBYSYS Meaning: The
lock is not held by any connection, but instead is held by the system.
For a request that specified any of the following, the request could
not be completed successfully because the specified lock is not currently
held as required: - LOCKOPER=NOTHELD with either of:
- LOCKOPER=HELDBY
Action: Retry the request, or obtain the lock
as required, and retry the request.
|
8 |
xxxx0801 |
Equate Symbol: IXLRSNCODEBADPARMLIST Meaning: Program
error. The parameter list for this request is not addressable. The
answer area (ANSAREA) fields are not valid.
Action: Verify
that: - The parameter list address is uncorrupted.
- The parameter list is addressable in the caller's primary address
space.
- If you are issuing this macro while disabled, the parameter list
resides in either page-fixed or DREF storage.
- If you are issuing this macro in AR-mode and you specified the
parameter list address using explicit register notation, the corresponding
access register was updated appropriately.
- If you are issuing this macro in AR-mode, SYSSTATE ASCENV=AR must
be issued before issuing this macro.
|
8 |
xxxx0804 |
Equate Symbol: IXLRSNCODEBADVERSIONNUM (or IXLRSNCODEBADVERSION#)
Meaning: The version number in the macro parameter list
is not compatible with the level of XES currently being used. The
answer area (ANSAREA) fields are not valid.
Action: - Verify that your program did not overlay the parameter list storage.
- Verify that your program was assembled with the correct macro
library for the release of MVS™ on
which your program is running.
|
8 |
xxxx080A |
Equate Symbol: IXLRSNCODEBADCONTOKEN Meaning: Program
error. The specified connect token (CONTOKEN) was not valid for one
of the following reasons:
- The user with the connection identifier represented by the token
has disconnected from the structure.
- The connector's task (the task that issued IXLCONN) ended.
- The specified token is not the token that was returned from IXLCONN.
- The request was issued from an address space other than the address
space in which IXLCONN was issued.
- The connect token was invalidated during rebuild.
- The connect token was invalidated by XES.
Note: The answer area (ANSAREA) fields are not valid.
Action: Take
the action with the corresponding meaning.
- Discontinue use of the structure. Perform recovery and cleanup
for the structure and check the protocol for the use of the structure
to determine why you did not know of the disconnection.
- Discontinue use of the structure. Perform recovery and cleanup
for the structure and check the protocol for the use of the structure
to determine why you did not know that the task ended.
- The contoken is returned in the CONACONTOKEN field of the answer
area specified on the IXLCONN request.
- Issue your request from the same address space the IXLCONN was
issued in.
- Wait for the rebuild to complete, and try again.
- Discontinue use of the structure. Perform recovery and cleanup
for the structure.
|
8 |
xxxx0824 |
Equate Symbol: IXLRSNCODEWRONGSTRTYPE Meaning: Program
error. The connection specified by CONTOKEN is not to a list structure.
Action: Specify
the appropriate CONTOKEN value, and rerun your program. The CONTOKEN
is returned in the answer area provided on the IXLCONN invocation.
The type of structure built is passed on the TYPE parameter of the
IXLCONN macro.
|
8 |
xxxx0838 |
Equate Symbol: IXLRSNCODEBADANSAREA Meaning: Program
error. The storage area specified by ANSAREA is not addressable.
Action: Ensure
that: - The answer area address specified by ANSAREA is valid.
- If the caller is running in AR-mode and the ANSAREA parameter
was specified using explicit register notation, the corresponding
access register was updated appropriately.
- The address specified for ANSAREA is addressable in the caller's
primary address space or from the caller's PASN access list.
- If you are calling IXLLIST while disabled, ANSAREA must reside
in either page-fixed or DREF storage.
- If you are calling IXLLIST in AR-mode, SYSSTATE ASCENV=AR must
be issued before the IXLLIST macro.
|
8 |
xxxx0839 |
Equate Symbol: IXLRSNCODEBADREQTOKENAREA Meaning: Program
error. The storage area specified by REQTOKEN is not addressable.
Action: Ensure
that: - The request token area specified by REQTOKEN is valid.
- If the caller is running in AR-mode and the REQTOKEN parameter
was specified using explicit register notation, the corresponding
access register was updated appropriately.
- If you are calling IXLLIST while disabled, REQTOKEN must reside
in either page-fixed or DREF storage.
- If you are calling IXLLIST in AR-mode, SYSSTATE ASCENV=AR must
be issued before the IXLLIST macro.
|
8 |
xxxx083D |
Equate Symbol: IXLRSNCODEBADANSLEN Meaning: Program
error. The length of the answer area, as specified by ANSLEN, is not
sufficient to contain answer area information. The answer area (ANSAREA)
fields do not contain valid information.
Action: Increase
the size of the answer area, and rerun your program. The minimum size
of the ANSAREA is in the LAA_LEN field of the IXLYLAA mapping macro.
|
8 |
xxxx0846 |
Equate Symbol: IXLRSNCODEBADLOCKINDEX Meaning: Program
error. The specified LOCKINDEX exceeds the size of the lock table
for the structure.
Action: Correct LOCKINDEX to specify
an index that is contained within the lock table. The maximum value
for the LOCKINDEX is one less than the value specified by the LOCKENTRIES
parameter on the IXLCONN macro.
|
8 |
xxxx0847 |
Equate Symbol: IXLRSNCODEBADLISTNUMBER Meaning: Program
error. The specified LISTNUM value exceeds the number of lists for
the structure.
Action: Correct LISTNUM to specify a
list number that exists in the structure. The number of lists allocated
for a structure is determined on the LISTHEADERS parameter of the
IXLCONN macro. The list numbers go from 0 to n-1, where n is the number
of lists specified.
|
8 |
xxxx0849 |
Equate Symbol: IXLRSNCODEBADRESTOKEN Meaning: Program
error. The restart token specified by RESTOKEN is not valid.
Action: Determine
why the restart token cannot be used to restart the request. Possible
causes are: - The specified token does not correspond to the restart token
returned in the answer area of the previous request (field LAARESTOKEN).
- The user specified RESTOKEN when EXTRESTOKEN was required.
- The user specified EXTRESTOKEN when RESTOKEN was required.
For more information about premature request completion,
see z/OS MVS Programming: Sysplex Services Guide.
|
8 |
xxxx084B |
Equate Symbol: IXLRSNCODENOLOCKS Meaning: Program
error. A locking operation was requested, but the structure does not
contain a lock table.
Action: Ensure that: - You are connected to the intended structure.
- You intended to perform a locking operation.
The use of locks is determined by the LOCKENTRIES keyword on
the IXLCONN macro.
|
8 |
xxxx0851 |
Equate Symbol: IXLRSNCODENOSUSPENDISABLE Meaning: Program
error. The request failed because MODE=SYNCSUSPEND was specified,
but the caller is disabled and cannot be suspended.
Action: Either
specify another MODE value, or become enabled (release the CPU lock),
then reissue the request.
|
8 |
xxxx0854 |
Equate Symbol: IXLRSNCODEBADLOCKCOMP Meaning: Program
error. The connection identifier specified for LOCKCOMP is not valid.
Action: The
connection identifier is returned in the answer area (mapped by IXLYCONA)
when the IXLCONN macro was issued.
|
8 |
xxxx0859 |
Equate Symbol: IXLRSNCODEBADLISTAUTH Meaning: The
list authority specified for AUTHCOMP failed the comparison specified
by AUTHCOMPTYPE for the list authority of the specified list. The
current list authority (field LAALISTAUTH) and description (field
LAALISTDESC) are returned in the answer area.
Action: None
required; however you might want to take some action depending on
your application. The list authority is set to binary zeros when the
structure is allocated. When IXLLIST is issued with the NEWAUTH keyword,
the list authority is changed if the correct comparison list authority
value is specified. Check the answer area to determine the list authority
value for the list specified. Verify that the correct list number
was specified.
|
8 |
xxxx0887 |
Equate Symbol: IXLRSNCODEBADEXTRESTOKEN Meaning: Program
error. The extended restart token specified by EXTRESTOKEN is not
valid. The specified token refers to an older instance of the target
structure.
Action: Reinitiate the request with an
EXTRESTOKEN value of zero. A system-managed process occurred between
the time a request returned the extended restart token and the time
the connector tried to continue the request using that token. Discard
the results of the initial request and reissue the request. For more
information about restarting requests, see z/OS MVS Programming: Sysplex Services Guide.
|
C |
xxxx0C06 |
Equate Symbol: IXLRSNCODENOCONN Meaning: Environmental
error. This system does not have connectivity to the coupling facility
that contains the list structure. Possible reasons for this are: - The operator issued VARY PATH,OFFLINE.
- The operator issued CONFIG CHP,OFFLINE.
- Hardware errors to the coupling facility.
- Facility or path failure to the coupling facility.
Action: Begin rebuilding the structure on a different
coupling facility, or disconnect from the structure.
|
C |
xxxx0C13 |
Equate Symbol: IXLRSNCODEREQPURGED Meaning: Environmental
error. The request was purged prior to completion of the request.
Possible reasons include: - The connector failed.
- The connector disconnected.
- The requestor failed.
- The request was purged by IXLPURGE.
- Requests were purged when the connector provided an IXLEERSP response
for the Rebuild Stop or Rebuild Cleanup event.
- The secondary address space was no longer valid.
Action: None if this is expected. Otherwise,
determine why the connector failed.
|
C |
xxxx0C14 |
Equate Symbol: IXLRSNCODESTATUSUNKNOWN Meaning: Environmental
error. The request has completed, but the final disposition of the
request cannot be determined. The answer area (ANSAREA) fields do
not contain valid information.
Action: - Verify the validity of your data by comparing the expected results
with what is in the coupling facility.
- Consider running rebuild processing to move the structure to attempt
to protect it from further errors of this kind.
|
C |
xxxx0C25 |
Equate Symbol: IXLRSNCODESTRFAILURE Meaning: Environmental
error. The list structure failed prior to completion of the request.
Action: Either
rebuild or disconnect from the structure.
|
C |
xxxx0CA0 |
Equate Symbol: IXLRSNCODEQUIESCEDSUSPENDFAIL Meaning: Environmental
error. The request is failed because the structure is quiesced for
a system-managed process and SUSPEND=FAIL is specified on the IXLCONN.
Action: None,
if this is expected.
|
C |
xxxxFFFF |
Equate Symbol: IXLRSNCODENOTAVAILABLE Meaning: Environmental
error. XES functions are not available. This could occur because the
coupling facility hardware necessary to provide XES functions is not
present.
Action: Re-IPL the system, or follow your
particular failure management protocol.
|
10 |
xxxx10xx |
Meaning: System error. XES processing failure. The state
of the involved structure and the disposition of the request are unpredictable.
The answer area (ANSAREA) fields do not contain valid information.
Action: Contact the IBM® support
center.
|