Explanation
A CONFIG or VARY command requested addition or
removal of hardware units from a configuration. While processing the
command, the system detected an error. A hexadecimal reason code in
register 15 explains the error:
- Code
- Explanation
- 00000301
- The system detected an incorrect parameter.
- 00000302
- The caller was not authorized to use the vary path interface.
- 00000303
- For the processing, the system requested virtual storage but failed
to obtain it.
- xxyy0304
- The vary path interface detected a failing return code from the
message buffer service. The message buffer service's return code and
reason code are provided in xx and yy respectively.
- 00000401
- The service processor was running a CONFIG STOR ONLINE command.
The service processor varied the requested storage physically online,
but the system was unable to vary the storage logically online. The
service processor then tried unsuccessfully to vary the storage physically
offline.
- 00000402
- The system returned an unexpected return code.
- 00000403
- The system tried to vary storage online or offline, but received
an unexpected response code from the service processor.
- 00000404
- Processing for vary path reconfiguration received an unexpected
response code from the service processor.
- 00000405
- The system tried to obtain storage element information, but received
an unexpected response code from the service processor.
- 00000406
- The system failed to establish a recovery environment.
- 00000501
- The system received an unexpected return code from the service
processor call SVC routine.
- 00000502
- The system tried to vary a storage element online or offline,
but received an unexpected response code from the service processor.
- 00000503
- The system tried to obtain storage element information, but received
an unexpected response code from the service processor.
- 00000504
- The system tried to copy and reassign storage, but received an
unexpected response code from the service processor.
- 00000505
- The system failed to establish a recovery environment.
- 00000601
- The system returned an unexpected return code.
- 00000602
- The system failed to establish a recovery environment.
- 00000603
- The system received an unexpected return code for reconfiguration
message processing.
- 00000701
- The system received an unexpected return code when requesting
storage status.
- 00000702
- The system received an unexpected return code when requesting
that storage be logically varied online.
- 00000703
- The system received return code 8 when requesting that storage
be logically varied offline. This code indicates that the requested
storage range contains permanently resident storage.
- 00000704
- The system received an unexpected return code when requesting
that storage be logically varied offline.
- 00000705
- The system failed to establish a recovery environment.
- 00000706
- The system received an unexpected response code for a Store Extended
Storage Usability Map command from the service processor.
- 00000707
- The system received an unexpected return code for a Store Extended
Storage Usability Map command from a service processor routine.
- xxxx0B01
- Processing for the DISPLAY MATRIX command received a nonzero return
code.
- xxxx0B02
- Processing for the DISPLAY MATRIX command tried to issue a message,
but could not find the associated message text.
- xxxx0B04
- The system received a nonzero return code from the ESTAE macro. xxxx is
the return code.
- xxxx0C01
- A command identified a processor on which it is to run. The processor
identifier is not in the system table of identifiers.
- xxxx0C02
- Reconfiguration message processing returned a nonzero return code
to reconfiguration.
- xxxx0D01
- The system could not establish a recovery environment.
- xxxx0D02
- The system tried to call reconfiguration message processing, but
an error occurred.
- 00000E01
- Reconfiguration message processing received an incorrect address
for the message buffer.
- 00041001
- Processing for the VARY PATH command received an unidentified
or failing return code from reconfiguration message processing. The
message text was too long.
- 00081001
- Processing for the VARY PATH command received an unidentified
or failing return code from reconfiguration message processing. The
return code indicates that reconfiguration message processing was
to issue a WTOR macro and await a reply, but no replies exist in the
static message area.
- 000C1001
- Processing for the VARY PATH command received an unidentified
or failing return code from reconfiguration message processing. The
number of message inserts was incorrect.
- 00101001
- Processing for the VARY PATH command received an unidentified
or failing return code from reconfiguration message processing. The
return code indicates that the system could not establish a recovery
environment.
- 00141001
- Processing for the VARY PATH command received an unidentified
or failing return code from reconfiguration message processing. The
return code indicates that the message buffer area could not be obtained.
- 00181001
- Processing for the VARY PATH command received an unidentified
or failing return code from reconfiguration message processing. The
return code indicates that the message buffer identifier was incorrect.
- 001C1001
- Processing for the VARY PATH command received an unidentified
or failing return code from reconfiguration message processing. The
return code indicates that an abend occurred.
- xxxx1201
- Processing for channel path reconfiguration received a nonzero
return code.
- xxxx1202
- Processing for channel path reconfiguration received a nonzero
return code during vary processing.
- xxxx1204
- Processing for channel path reconfiguration detected an incorrect
post code during vary processing.
- 00001501
- Processing for vary path reconfiguration received an unexpected
return code.
- 00001502
- Processing for vary path reconfiguration received an unexpected
return code. The system was processing a request to bring online a
Teleprocessing (TP) device with active I/O.
- 00001503
- Processing for vary path reconfiguration received a nonzero return
code indicating one of the following errors:
- The system was unable to obtain enough storage to process the
online request.
- The system encountered an unrecoverable program error.
- 00001504
- The operator replied CANCEL to message IEE717D, then one of the
following occurred:
- The system encountered a programming error while processing a
request to bring a path online.
- Processing for vary path reconfiguration encountered a programming
error. The pointer to the current vary request block is 0.
- 00001505
- Processing for vary path reconfiguration received an unidentified
or failing return code.
- xxxx1601
- Reconfiguration requested virtual storage. The request failed.
- xxxx
- The GETMAIN return code.
- xxxx1602
- Processing to force a channel path offline encountered an error.
- xxxx
- The last return code encountered.
- xxxx1603
- A service processor failure occurred.
- xxxx
- The last service processor call return code.
- 00001604
- A service processor command is incorrect.
- xxxx1605
- Processing to force a channel path offline received an unidentified
service processor response code.
- xxxx
- The service processor response code.
- xxxx1606
- The service processor took more than 45 seconds to process a request.
- xxxx
- The last service processor call return code.
- xxxx1701
- Reconfiguration requested virtual storage. The request failed.
- xxxx
- The GETMAIN return code.
- xxxx1702
- A service processor failure occurred.
- xxxx
- The service processor response code.
- xxxx1801
- Reconfiguration received a nonzero return code from an ESTAE macro.
- xxxx
- The return code.
- xxxx1904
- Reconfiguration received a nonzero return code from an ESTAE macro.
- xxxx
- The return code.
- xxxx1A01
- Reconfiguration received a nonzero return code from an ESTAE macro.
- xxxx
- The return code.
- xxxx1A02
- Reconfiguration called the service processor, but the service
processor did not return information.
- xxxx
- The response code from the service processor.
- xxxx1B01
- Reconfiguration received a nonzero return code from an ESTAE macro.
- xxxx
- The return code.
- xxxx1B02
- Reconfiguration called the service processor, but the service
processor did not return CHP information.
- xxxx
- The response code from the service processor.
- xxxx1C01
- Reconfiguration received a nonzero return code from an ESTAE macro.
- xxxx
- The return code.
- xxxx1C02
- A reconfiguration call to the service processor failed.
- xxxx
- The response code from the service processor.
- xxxx2001
- Reconfiguration could not set up an ESTAE environment.
- xxxx2002
- Reconfiguration message processing could not find a message identifier.
- xxxx2003
- Reconfiguration message processing found that the number of inserts
received in the parameters does not match the message definition.
- xxxx2004
- Reconfiguration message processing found that the specified message
does not fit into the 72-byte buffer.
- xxxx2005
- Reconfiguration message processing found that the parameters passed
to it specified more than 4 bytes for the length of a table insert
or a hexadecimal or decimal insert.
- xxxx2006
- Reconfiguration message processing found that the parameters passed
to it specified a table insert that was beyond the insert table in
the message definition.
- xxxx211C
- A reconfiguration call to the service processor did not return
information; the reason and response codes were either not recognized
or expected. Reconfiguration records diagnostic information in the
system diagnostic work area (SDWA), in the variable recording area
(VRA), or for CPU/VF reconfiguration, SYMREC. Reconfiguration returns
control to the caller with return code X'1C'.
- xxxx
- The reason or response code.
- xxxx2120
- Reconfiguration requested virtual storage. The request returned
a nonzero return code. Reconfiguration records diagnostic information
in the SDWA, in the VRA, or for CPU/VF reconfiguration, SYMREC. Reconfiguration
returns control to the caller with return code X'20'.
- xxxx
- The GETMAIN return code.
- 00002128
- Reconfiguration received an incorrect request. The request is
incorrect for one of the following reasons:
- The parameter list control block identifier or version number
was incorrect.
- The function code was unrecognized.
- The side information block control block identifier or version
number was incorrect.
- 0000212C
- Reconfiguration was running on a central processor that does not
support the service processor architecture.
- xxxx2201
- Reconfiguration received a nonzero return code from an ESTAE macro.
- xxxx
- The ESTAE return code.
- xxxx2202
- Reconfiguration received an incorrect function code.
- xxxx
- The incorrect function code.
- xxxx2281
- Reconfiguration received a nonzero return code.
- xxxx
- The return code.
- xxxx2282
- Reconfiguration requested virtual storage. The request returned
a nonzero return code.
- xxxx
- The GETMAIN return code.
- xxxx22C1
- Reconfiguration received a nonzero return code from a service
processor call SVC.
- xxxx
- The return code.
- xxxx22C2
- Reconfiguration received an unexpected response from the service
processor.
- xxxx
- The service processor response.
- xxxx2302
- The system called reconfiguration message processing; an error
occurred.
- xxxx2402
- The system called reconfiguration message processing; an error
occurred.
- xxxx2502
- The system called reconfiguration message processing; an error
occurred.
- xxxx2602
- The system called reconfiguration message processing; an error
occurred.
- xxxx2702
- The system called reconfiguration message processing; an error
occurred.
- xxxx2802
- The system called reconfiguration message processing; an error
occurred.
- xxxx2902
- The system called reconfiguration message processing; an error
occurred.
- xxxx2A02
- The system called reconfiguration message processing; an error
occurred.
- xxxx3232
- The ESTAE recovery routine cannot be established.
System action
The system:
- Frees all resources related to the reconfiguration command.
- Writes a logrec data set error record.
- May issue message IEE174I or IEE521I.
- Writes a dump.
Operator response
Enter the command again. If the command fails
again, look at message IEE521I. Depending on the text of message IEE521I,
do the following:
- STATUS NOT OBTAINED: SERVICE PROCESSOR FAILURE
- Contact hardware support. Provide the logrec data set error record.
- STATUS NOT OBTAINED: SERVICE PROCESSOR CALL FAILED
- Contact the system programmer.
System programmer response
Search problem reporting data bases
for a fix for the problem. If no fix exists, contact the IBM® Support Center. Provide the dump and the
logrec data set error record.
Source