Path Data Section

Offsets		Name	Length	Format	Description
0	0	R742PNME	8	EBCDIC	System name as defined in parmlib member IEASYSxx SYSNAME parameter.
8	8	R742PDEV	4	EBCDIC	Device number.
12	C	R742PSTF	1	binary	Status flags Bit Meaning when set 0 Path became active during this interval 1 Path became inactive during this interval. 2 Counts reset by XCF during this interval. 3-7 Reserved.
13	D	R742PDIR	1	binary	Direction path Bit Meaning when set 0 Inbound path 1 Outbound path 2-7 Reserved.
14	E	R742PTYP	1	binary	Path type indicator. Value Meaning 1 CTC 3 List structure.
15	F		1		Reserved.
16	10	R742PONA	8	EBCDIC	Name of system on other end if known, otherwise blanks.
24	18	R742PODV	4	EBCDIC	Device number on other end if known, otherwise blanks.
28	1C	R742PSTA	1	binary	Path status Bit Meaning when set 0 Starting 1 Restarting 2 Working 3 Stopping 4 Waiting for completion of communication link 5 Not operational. Path defined to XCF, but not usable until hardware and/or definition problems are resolved. 6 Stop failed 7 Rebuilding.
29	1D	R742PSTM	1	binary	More path status flags: Bit Meaning when set 0 Quiescing 1 Quiesced 2-7 Reserved.
30	1E		2		Reserved.
32	20	R742PRET	4	binary	Path retry limit.
36	24	R742PRST	4	binary	Number of restarts.
40	28	R742PMXM	4	binary	Maximum number of 1K blocks of message buffer space.
44	2C	R742PSIG	4	binary	Number of outbound (inbound) signals sent (received) over path.
48	30	R742PQLN	4	binary	Number of outbound signals pending transfer on path.
52	34	R742PIBR	4	binary	Number of inbound signals refused due to maximum message limit.
56	38	R742PSUS	4	binary	Number of times this signalling path was not busy when it was selected to transfer a message.
60	3C	R742PAPP	4	binary	Number of times this signalling path was busy when it was selected to transfer a message.
64	40	R742PTCN	8	EBCDIC	Transport class name (blanks for an inbound path).
72	48	R742PSTR	16	EBCDIC	Name of XES list structure being used as a path, blank for CTCs.
88	58	R742PIOT	4	binary	For inbound paths: Average I/O transfer time (microseconds) for the observed in the last minute of the RMF™ reporting interval, or X'FFFFFFFF' (if time > 35 minutes). For outbound paths, the field is zero.
92	5C	R742PRCT	4	binary	Path retry count.
96	60	R742PPND	4	binary	The current number of signals pending for transfer on the path (outbound only).
100	64	R742PUSE	4	binary	The current number of 1KB blocks of message buffer space in use by this path.
104	68	R742PLIN	4	binary	List number within structure.

For each path which has been added during the measurement interval, only fields R742PNME, R742PDIR, R742PONA, and R742PQLN contain data, all other fields are blank or contain X'00'.