0 |
Value: OK Meaning: The call completed successfully.
System
Action: The system continues processing.
Application
Programmer Response: None required.
|
1 |
Value: Allocate_failure_no_retry Meaning: A TP submitted an allocate
request. The request specified a value on the Return_control parameter
that was other than Immediate. One of the following occurred:
- Virtual telecommunications access method (VTAM) could not establish
a session with the partner LU.
- APPC/MVS could not establish a conversation.
System
Action: The system returns this return code to
the caller of Allocate.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
See z/OS Communications Server: SNA Programmer's LU 6.2 Guide
for a description of the sense codes included in the message from
Error_Extract. If the error persists, verify that the
name specified on the Local_LU_name parameter is correct. If the
name is correct, contact the system programmer.
System
Programmer Response: At the request of the application programmer,
ensure that the local LU is defined correctly in the VTAM application
(APPL) statement in SYS1.VTAMLST.
|
2 |
Value: Allocate_failure_retry Meaning: A TP
submitted an allocate request. The request specified a value on the
Return_control parameter that was other than Immediate. The
system cannot allocate the conversation because of a condition that
might be temporary.
System
Action: The system returns this return code to
the caller of Allocate.
Application
Programmer Response: Retry the allocate request.
|
3 |
Value: Conversation_type_mismatch Meaning: The partner LU rejected an allocate request.
The local TP called the Allocate service and specified a value of
Basic_conversation or Mapped_conversation on the Conversation_type
parameter. The partner TP does not support the respective basic or
mapped conversation protocol boundary.
System
Action: The
system returns this return code on a call that occurs after the call
to Allocate.
Application
Programmer Response: When requesting the allocate,
change the Conversation_type parameter to specify a conversation type
that the partner TP supports.
|
6 |
Value: Security_not_valid Meaning: The partner LU rejected
an allocate request. The specified security information is not valid.
System
Action: The system returns this return code on
a call that occurs after the call to Allocate.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
8 |
Value: Sync_lvl_not_supported_pgm Meaning: The partner LU rejected
an allocate request. The local TP specified a synchronization level
(on the Sync_level parameter) that the partner TP does not support.
System
Action: The system returns this return code on a call
that occurs after the call to Allocate.
Application
Programmer Response: See Allocate for
an explanation of the Sync_level parameter. When requesting the allocate,
ensure that the Sync_level parameter specifies a correct value.
|
9 |
Value: TPN_not_recognized Meaning: The partner LU rejected an allocate request.
The local TP specified a partner TP that the partner LU does not recognize.
System
Action: The system returns this return code on a call
that occurs after the call to Allocate.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
10 |
Value: TP_not_available_no_retry Meaning: The partner LU rejected an Allocate request.
The local TP specified a partner TP that is known to the partner
LU, but the partner LU cannot start the TP. The condition is not
temporary. The TP should not retry the Allocate request.
System
Action: The system returns this return code on a call
that occurs after the call to Allocate.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
11 |
Value: TP_not_available_retry Meaning: The partner LU rejected an allocate request.
The local TP specified a partner TP that the partner LU recognizes
but cannot start. The condition might be temporary.
System
Action: The system returns this return code on a call
that occurs after the call to Allocate.
Application
Programmer Response: Retry the allocate request. If the error
persists, see Diagnosing Problems with APPC/MVS TPs for methods
to use to diagnose the return code. See Error_Extract for
the Error_Extract calling format.
|
17 |
Value: Deallocated_abend Meaning: A
partner TP called the Deallocate service. The request specified a
Deallocate_type of Deallocate_abend.
System
Action: If
the partner TP was in Receive state when it called Deallocate, the
system purges information sent by the local TP that was not received
by the partner TP. The system returns this return code to the local
TP when it calls an APPC service in Send or Receive state.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
18 |
Value: Deallocated_normal Meaning: A partner TP called the Deallocate service for
a basic or mapped conversation. The request specified a Deallocate_type
of Deallocate_sync_level or Deallocate_flush.
System
Action: The system returns this return code to the local
TP when it calls a service while the conversation is in Receive state.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
19 |
Value: Parameter_error Meaning: A local TP called an APPC service. A parameter
specified on the call is not valid. One
of the following occurred: - SNASVCMG was specified as the mode name, or the mode name was
not valid.
- X'0E' or X'0F' was used as the first character
of a TP name.
- X'06' was used as the first character of a TP name by
a caller that was not running either in supervisor state or with PSW
key 0-7.
- An SNA service TP name was used with a mapped conversation service.
System Action: The system might write symptom records, which
describe the error, to the logrec data set.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
20 |
Value: Product_specific_error Meaning: The system found a product-specific error.
System
Action: The system might write symptom records, which
describe the error, to the logrec data set.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format. If
necessary, see Diagnosing Product-Specific Errors for more information
about product-specific errors.
|
21 |
Value: Program_error_no_trunc Meaning: Indicates one of the following:
- A partner TP called the Send_Error service for a mapped conversation.
The conversation for the local TP was in Send state. No truncation
occurs at the mapped conversation protocol boundary.
- A partner TP called Send_Error for a basic conversation. The conversation
was in Send state. The call did not truncate a logical record. No
truncation occurs at the basic conversation protocol boundary when
a TP calls Send_Error either before sending any logical records or
after sending a complete logical record.
System
Action: The system returns this return code to
the local TP when it calls the Receive service, before the TP receives
any data records or after it receives one or more data records.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
22 |
Value: Program_error_purging Meaning: A partner TP called the Send_Error service for
a basic or mapped conversation. The conversation for the partner TP
was in Receive or Confirm state.
System
Action: The
system returns this return code to the local TP when it calls an APPC
service before sending any information. If the TP called Send_Error
while in Receive state and before it received all the information
that the partner TP sent, the system might purge the data. If the
TP called Send_Error while in Receive or Confirm state but after it
received all the information that the partner TP sent, the system
does not purge the data.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
23 |
Value: Program_error_trunc Meaning: The partner
TP called the Send_Error service for a basic conversation. The conversation
for the partner TP was in Send state, and the call truncated a logical
record. Truncation occurs at the basic conversation protocol boundary
when a TP begins sending a logical record and then makes a Send_error
call before sending the complete logical record.
System
Action: The system returns this return code to the local
TP on a Receive call that occurs after the TP receives the truncated
logical record.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
24 |
Value: Program_parameter_check Meaning: For
the CPI Communications Initialize_Conversation service, the SYMDEST
name was not found in the side information.
System Action: The system returns this return code to the caller
of the APPC service in error.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
25 |
Value: Program_state_check Meaning: The local TP called a service while running
in a state in which the call is not valid. The TP should not examine
any other returned variables associated with the call because nothing
is placed in those variables.
System
Action: The state of the conversation remains
unchanged. For a list of states that are valid for each call, see APPC/MVS Conversation State Table.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
26 |
Value: Resource_failure_no_retry Meaning: An error caused the conversation to terminate.
The condition is not temporary. The application should not try to
run the transaction until the condition is corrected.
System
Action: The system terminates the conversation.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
27 |
Value: Resource_failure_retry Meaning: An error caused the conversation to terminate.
The condition might be temporary.
System
Action: The
system terminates the conversation.
Application
Programmer Response: Retry
the transaction.
|
28 |
Value: Unsuccessful Meaning: A call to a
TP conversation service was not successful.
System Action: The system returns this return code to the caller
of the APPC service in error.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
30 |
Value: Deallocated_abend_SVC Meaning: The partner
TP called Deallocate with a Deallocate_type of Deallocate_abend_SVC.
System
Action: If the partner TP was in Receive state when it
called Deallocate, the system purges all information that was sent
by the local TP but was not yet received by the partner TP. The system
returns this return code to the local TP when it calls a service while
in Send or Receive state.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
31 |
Value: Deallocated_abend_timer Meaning: A partner TP
called the Deallocate service with a Deallocate_type of Deallocate_abend_timer.
System
Action: If the partner TP was in Receive state when it
called Deallocate, the system purges all information that was sent
by the local TP but was not yet received by the partner TP. The system
returns this return code to the local TP when it calls a service while
in Send or Receive state.
Application
Programmer Response: See Diagnosing Problems with APPC/MVS TPs for
methods to use to diagnose the return code. See Error_Extract for the Error_Extract calling format.
|
100 |
Value: Take_backout Meaning: This value is returned only
when all of the following conditions are true: - The Sync_level is set to syncpt.
- The conversation is not in Initialize state.
- The program is using protected resources that must be backed out.
System
Action: The system returns this return code to
the caller of the service.
Application
Programmer Response: Before it
can use this conversation or any other protected conversations associated
with the current context again, the local TP must issue a Backout
call to restore all protected resources to their status as of the
last synchronization point.
|
130 |
Value: Deallocated_abend_bo Meaning: This return code is returned only for conversations
with Sync_level set to syncpt.
The partner program issued a Deallocate call with Deallocate_type
set to deallocate_abend, or the partner LU has done so because of
a partner program abnormal-end condition.
System
Action: If the conversation for the partner program
was in Receive state when the call was issued, information sent by
the local program and not yet received by the partner program is purged.
The conversation is now in Reset state.
Application
Programmer Response: Before
it can use any other protected conversations associated with the current
context again, the local TP must issue a Backout call to restore all
protected resources to their status as of the last synchronization
point.
|
131 |
Value: Deallocated_abend_SVC_bo Meaning: This return code is returned only for conversations
with Sync_level set to syncpt.
The partner TP called Deallocate with a Deallocate_type of deallocate_abend_SVC.
System
Action: If the partner TP was in Receive state
when it called Deallocate, the system purges all information that
was sent by the local TP but was not yet received by the partner TP.
The system returns this return code to the local TP when it calls
a service while in Send or Receive state.
Application
Programmer Response: Before
it can use any other protected conversations associated with the current
context again, the local TP must issue a Backout call to restore all
protected resources to their status as of the last synchronization
point.
|
132 |
Value: Deallocated_abend_timer_bo Meaning: This return code is returned only for conversations
with Sync_level set to syncpt.
A partner TP called the Deallocate service with a Deallocate_type
of deallocate_abend_timer.
System
Action: If the partner TP was in Receive state
when it called Deallocate, the system purges all information that
was sent by the local TP but was not yet received by the partner TP.
The system returns this return code to the local TP when it calls
a service while in Send or Receive state.
Application
Programmer Response: Before
it can use any other protected conversations associated with the current
context again, the local TP must issue a Backout call to restore all
protected resources to their status as of the last synchronization
point.
|
133 |
Value: Resource_failure_no_retry_bo Meaning: This return code is returned only for conversations
with Sync_level set to syncpt.
An error caused the conversation to terminate. The condition is
not temporary. The application should not try to run the transaction
until the condition is corrected.
The system terminates the conversation.Before it can use any other protected conversations
associated with the current context again, the local TP must issue
a Backout call to restore all protected resources to their status
as of the last synchronization point.
System
Action: The system terminates the conversation.
Application
Programmer Response: Before it can use any other protected conversations
associated with the current context again, the local TP must issue
a Backout call to restore all protected resources to their status
as of the last synchronization point.
|
134 |
Value: Resource_failure_retry_bo Meaning: This return code is returned only for conversations
with Sync_level set to syncpt.
An error caused the conversation to terminate. The condition might
be temporary.
System
Action: The system terminates the conversation.
Application
Programmer Response: Before it can use any other protected conversations
associated with the current context again, the local TP must issue
a Backout call to restore all protected resources to their status
as of the last synchronization point.
|
135 |
Value: Resource_failure_retry_bo Meaning: This return code is returned only for conversations
with Sync_level set to syncpt.
When the Send_Error call is issued in Receive state, incoming information
is purged by the system. This purged information might include an
abend deallocation notification from the partner program or system.
The conversation is now in Reset state.
System
Action: The system returns this return code to
the caller of the service.
Application
Programmer Response: Before it
can use any other protected conversations associated with the current
context again, the local TP must issue a Backout call to restore all
protected resources to their status as of the last synchronization
point.
|