0 |
000 |
Meaning: SWBTU_MERGE processing
completed successfully. Action: None.
|
0 |
0CA |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, the value
in SJSMMKER or SJSMEKER was ignored. SJSMMKER or SJSMEKER contains
a key in error. Action: Determine if it is
acceptable for the information in SJSMMKER or SJSMEKER to be ignored.
|
0 |
0CB |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, the text unit
count for the key that appears in SJSMMKER is not valid. All data
for this text unit is ignored. Action: Determine
if it is acceptable for the text unit data to be ignored.
|
0 |
1F4 |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, a text unit
length in a length-value pair for the key that appears in SJSMMKER
is not valid. All data for this text unit is ignored. Action:
Check the length specified for the key that appears in SJSMMKER. Determine
if it is acceptable for the text unit to be ignored.
|
0 |
1F5 |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, a text unit
value in a length-value pair for the key that appears in SJSMMKER
is not valid. All data for this text unit is ignored. Action: Check the value specified for the key that
appears in SJSMMKER. Determine if it is acceptable for the text unit
to be ignored.
|
0 |
1F6 |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, a numeric
value of a length-value pair in a text unit exceeds the maximum allowable
value. SJSMMKER contains the key from the text unit that is in error.
All data for this text unit is ignored. Action:
Check the value specified in the text unit and determine if it is
acceptable for the text unit to be ignored.
|
0 |
1F7 |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, a numeric
value of a length-value pair in a text unit is less than the minimum
allowable value. SJSMMKER contains the key from the text unit that
is in error. All data for this text unit is ignored. Action:
Check the value specified in the text unit and determine if it is
acceptable for the text unit to be ignored.
|
0 |
1FE |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, a character
value level length in a text unit exceeds the maximum allowed for
character data. SJSMMKER contains the key from the text unit that
is in error. All data for this text unit is ignored. Action:
Check the value specified in the text unit and determine if it is
acceptable for the text unit to be ignored.
|
0 |
1FF |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, the number
of levels for a character value in a text unit exceeds the maximum
allowed. SJSMMKER contains the key from the text unit that is in error.
All data for this text unit is ignored. Action:
Check the value specified in the text unit and determine if it is
acceptable for the text unit to be ignored.
|
0 |
200 |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, the first
character of the level in the character value in a text unit is not
valid for character data. SJSMMKER contains the key from the text
unit that is in error. All data for this text unit is ignored. Action: Check the value specified in the text unit
and determine if it is acceptable for the text unit to be ignored.
|
0 |
201 |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, a character
is not valid for character data. The incorrect value is not the first
character of the level in the character value in a text unit. SJSMMKER
contains the key from the text unit that is in error. All data for
this text unit is ignored. Action: Check
the value specified in the text unit and determine if it is acceptable
for the text unit to be ignored.
|
0 |
226 |
Meaning: Program error.
SWBTU_MERGE processing completed successfully; however, a text unit
contained a text character that is outside the range X'40' - X'FE'.
SJSMMKER contains the key from the text unit that is in error. All
data for this text unit is ignored. Action:
Check the value specified in the text unit and determine if it is
acceptable for the text unit to be ignored.
|
0 |
227 |
Meaning: SWBTU_MERGE processing
completed successfully; however, the sequence of characters in a text
unit is not valid. SJSMMKER contains the key from the text unit that
is in error. All data for this text unit is ignored. Action:
Check the value specified in the text unit parameter and determine
if it is acceptable for the text unit to be ignored.
|
0 |
228 |
Meaning: SWBTU_MERGE processing
completed successfully; however, there are bits on in the text unit
parameter that the system does not recognize. SJSMMKER contains the
key from the text unit that is in error. All data for this text unit
is ignored. Action: Check the value specified
in the text unit parameter and determine if it is acceptable for the
text unit to be ignored.
|
0 |
76C |
Meaning: SWBTU_MERGE processing
completed successfully. The resulting SWBTU (pointed to by SJSMAREA)
has a prefix and no text units. Action: None
required. However, you might take some action based on your application.
|
4 |
0C8 |
Meaning: Program error.
The specified verb is not defined to the system. Action:
Specify a valid verb.
|
4 |
0CA |
Meaning: Program error.
The system does not recognize the text unit key. SJSMMKER or SJSMEKER
contains the key from the text unit that is in error. All data for
this text unit is ignored. Action: Check
the text unit key. Correct the key and issue the SJFREQ macro again.
|
4 |
0CB |
Meaning: Program error.
The count in a text unit is not valid. SJSMMKER contains the key for
the text unit that is not valid. Action:
Check the text unit count. Correct the count and issue the SJFREQ
macro again.
|
4 |
1F4 |
Meaning: Program error.
A length in a length-value pair in a text unit is not valid. SJSMMKER
contains the key for the text unit that is not valid. Action:
Check the length. Correct the length and issue the SJFREQ macro again.
|
4 |
1F5 |
Meaning: Program error.
A text unit value in a length-value pair is not valid. SJSMMKER contains
the key for the text unit that is not valid. Action:
Check the value. Correct the value and issue the SJFREQ macro again.
|
4 |
1F6 |
Meaning: Program error.
A numeric value of a length-value pair in a text unit exceeds the
maximum allowable value. SJSMMKER contains the key from the text unit
that is in error. Action: Check the value.
Correct the value and issue the SJFREQ macro again.
|
4 |
1F7 |
Meaning: Program error.
A numeric value of a length-value pair in a text unit is less than
the minimum allowable value. SJSMMKER contains the key from the text
unit that is in error. Action: Check the
value. Correct the value and issue the SJFREQ macro again.
|
4 |
1FE |
Meaning: Program error.
A character value level length in a text unit exceeds the maximum
allowed for character data. SJSMMKER contains the key from the text
unit that is in error. Action: Check the
value specified in the text unit. Correct the value and issue the
SJFREQ macro again.
|
4 |
1FF |
Meaning: Program error.
The number of levels for a character value in a text unit exceeds
the maximum allowed. SJSMMKER contains the key from the text unit
that is in error. Action: Check the value
specified in the text unit. Correct the value and issue the SJFREQ
macro again.
|
4 |
200 |
Meaning: Program error.
A character in a text unit is not valid for character data. The character
is the first character in the level in the text unit. SJSMMKER contains
the key from the text unit that is in error. Action:
Check the value specified in the text unit. Correct the value and
issue the SJFREQ macro again.
|
4 |
201 |
Meaning: Program error.
A character is not valid for character data. The character is not
the first character of the level in the character value in a text
unit. SJSMMKER contains the key from the text unit that is in error. Action: Check the value specified in the text unit.
Correct the value and issue the SJFREQ macro again.
|
4 |
206 |
Meaning: A text unit key
contained hex zeros. Action: Check the text
unit key value specified in the text unit. Correct the value and
issue the SJFREQ macro again.
|
4 |
226 |
Meaning: Program error.
A text unit contained a text character that is outside the range X'40' - X'FE'.
SJSMMKER contains the key from the text unit that is in error. Action: Check the value specified in the text unit.
Correct the value and issue the SJFREQ macro again.
|
4 |
227 |
Meaning: The sequence of
characters in a text unit is not valid. SJSMMKER contains the key
from the text unit that is in error. Action:
Check the value specified in the text unit parameter. Correct the
value and issue the SJFREQ macro again.
|
4 |
228 |
Meaning: There are bits
on in the parameter that the system does not recognize. SJSMMKER contains
the key from the text unit that is in error. Action:
Check the value specified in the text unit parameter. Correct the
value and issue the SJFREQ macro again.
|
4 |
76D |
Meaning: Program error.
The output area (identified by SJSMAREA and SJSMSIZE) is not large
enough for the resulting SWBTU. Action: Increase
the size of the output area and issue the SJFREQ macro again.
|
4 |
76E |
Meaning: Program error.
One of the following occurred: - The base SWBTU pointer list address (SJSMSWBA) is zero and the
number of SWBTU pointers (SJSMSWBN) in the base pointer list is not
zero
- The SWBTU pointer list address is not zero and the number of SWBTU
pointers in the base pointer list is zero.
Action: Supply the correct values for
SJSMSWBA and SJSMSWBN and issue the SJFREQ macro again.
|
4 |
76F |
Meaning: Program error.
One of the following occurred: - The merge SWBTU pointer list address (SJSMMTUP) is zero and the
number of SWBTU pointers (SJSMMTUN) in the merge pointer list is not
zero
- The merge SWBTU pointer list address is not zero and the number
of SWBTU pointers in the merge pointer list is zero.
Action: Supply the correct values for
SJSMMTUP and SJSMMTUN and issue the SJFREQ macro again.
|
4 |
770 |
Meaning: Program error.
One of the following occurred: - The erase text unit address (SJSMETUP) is zero and the size of
the erase text unit list area (SJSMETUS) is not zero
- The erase text unit address (SJSMETUP) is not zero and the size
of the erase text unit list area (SJSMETUS) is zero.
Action: Supply the correct values for
SJSMETUP and SJSMETUS and issue the SJFREQ macro again.
|
4 |
771 |
Meaning: Program error.
Either the output area address (SJSMAREA) is zero or the output area
size (SJSMSIZE) is not greater than zero. Action:
Check the values in SJSMAREA and SJSMSIZE and determine which is incorrect.
Specify valid values and issue the SJFREQ macro again.
|
4 |
772 |
Meaning: Program error.
One of the following happened: - Neither a base SWBTU nor a modify SWBTU were specified (SJSMSWBA
and SJSMMTUP are both zero).
- A base SWBTU was provided, but no modify SWBTU and no erase list
were provided (SJSMMTUP and SJSMETUP are zero).
Action: Do one of the following: - Specify a base or modify SWBTU.
- If a base SWBTU was provided, specify either a modify SWBTU or
an erase list.
|
4 |
773 |
Meaning: Program error.
The verb name in the merge SWBTU list does not match the verb name
in the base SWBTU list. Action: Supply input
for the same verb in both the base SWBTU list and the merge SWBTU
list.
|
4 |
774 |
Meaning: Program error.
One of the following occurred: - The version number (SJSMVERS) supplied in the parameter list
does not match the version defined in macro IEFSJSMP
- The length (SJSMLEN) supplied in the parameter list does not match
the actual length.
Action: Ensure that the constant SJSMCVER
is used in field SJSMVERS of the input parameter list and that the
constant SJSMLGTH is used in field SJSMLEN of the input parameter
list.
|
4 |
7A1 |
Meaning: Program error.
The base SWBTU list contains an error. Action:
Check output fields SJSMERRP and SJSMERRS. SJSMERRP contains the
address of a SWBTU that is in error. SJSMERRS may contain a reason
code that indicates an error in the base or merge SWBTU list. See Table 2 for the reason code descriptions.
|
0C |
000 |
Meaning: System error. The
system could not obtain storage for this request. Action:
Inform your system programmer of this problem.
|
10 |
000 |
Meaning: System error. The
ESTAE-type recovery routine failed. Action:
Inform your system programmer of this problem.
|
14 |
000 |
Meaning: System error. SJF
encountered a condition that caused an abnormal termination. Action: Check the input parameters, particularly
any pointer fields, to determine if the input values are correct.
|
18 |
000 |
Meaning: System error. The
service routines for SJFREQ are not available. Action:
SJF did not initialize properly. Contact the appropriate IBM® support
personnel.
|