Displaying the status of volumes in the storage group

Specifying the optional LISTVOL parameter provides the status of the volumes associated with the storage group. If you have volume 123456 in storage group SG1, the following command generates output similar to that shown in Figure 1.

D SMS,STORGRP(SG1),LISTVOL

Figure 1. Displaying Storage Group Volume Status Information

15.12.25          d sms,storgrp(slp01),listvol
15.12.25          IGD0021 15:12:25 DISPLAY SMS 900
STORGRP TYPE              SYSTEM= 1 2 3 4 5 6 7 8
SG1     {DUMMY|POOL|TAPE|VIO}     + . . . . . . .
VOLUME   UNIT    SYSTEM= 1 2 3 4 5 6 7 8 STORGRP NAME
123456                   + . . . . . . .   SG1
***************************** LEGEND *****************************
. THE STORAGE GROUP OR VOLUME IS NOT DEFINED TO THE SYSTEM
+ THE STORAGE GROUP OR VOLUME IS ENABLED
- THE STORAGE GROUP OR VOLUME IS DISABLED
* THE STORAGE GROUP OR VOLUME IS QUIESCED
D THE STORAGE GROUP OR VOLUME IS DISABLED FOR NEW ALLOCATIONS ONLY
Q THE STORAGE GROUP OR VOLUME IS QUIESCED FOR NEW ALLOCATIONS ONLY
SYSTEM 1 = sysname1    SYSTEM 2 = sysname2    SYSTEM 3 = sysname3
SYSTEM 4 = sysname4    SYSTEM 5 = sysname5    SYSTEM 6 = sysname6
SYSTEM 7 = sysname7    SYSTEM 8 = sysname8    SYSTEM 9 = sysname9
SYSTEM 10= sysname10   SYSTEM 11= sysname11   SYSTEM 12= sysname12
SYSTEM 13= sysname13   SYSTEM 14= sysname14   SYSTEM 15= sysname15
SYSTEM 16= sysname16   SYSTEM 17= sysname17   SYSTEM 18= sysname18
SYSTEM 19= sysname19   SYSTEM 20= sysname20   SYSTEM 21= sysname21
SYSTEM 22= sysname22   SYSTEM 23= sysname23   SYSTEM 24= sysname24
SYSTEM 25= sysname25   SYSTEM 26= sysname26   SYSTEM 27= sysname27
SYSTEM 28= sysname28   SYSTEM 29= sysname29   SYSTEM 30= sysname31
SYSTEM 31= sysname31   SYSTEM 32= sysname32