EZD1271E

Explanation
 The automated domain name registration (ADNR)
application no longer has a  connection to the Global Workload Manager
(GWM). 
 In the message text: gwmipaddress
The IP address of the GWM.  The IP address is specified on the
 gwm_id parameter of the gwm statement in the ADNR configuration file.

System action
 Processing continues.  The ADNR application can
no longer communicate  with the GWM.  ADNR will periodically try the
connection again.  If it succeeds,  the eventual action message will
be deleted.  See the information about  automated
domain name registration in z/OS Communications Server: IP Configuration
Guide for more information.

Operator response
 If the GWM application has been stopped,
no further actions are needed.  When  the GWM application is restarted,
the ADNR application automatically  reconnects to the GWM. If the
GWM was not stopped and the reason for the connection attempt failure
 between the ADNR and GWM application cannot be determined, save the
following information: The ADNR  log file
Any ADNR dump produced when the problem occurred
The TCP/IP  profile and system log of the TCP/IP stack used by
the ADNR application
The GWM log file
The TCP/IP profile and system log of the TCP/IP stack  used by
the GWM application

 Contact the system programmer.

System programmer response
 Verify that routing exists between
the IP address used by the ADNR application  and the IP address of
the GWM that is specified in the message.  A route should  exist from
the ADNR IP address to the GWM IP address, and a route should also
 exist from the GWM IP address to the ADNR IP address.  The IP address
used by the ADNR application is found in one of the following places: The IP address is specified on the host_connection_addr  parameter
of the  gwm statement that contains the corresponding gwm_id parameter
in the ADNR configuration  file.
The IP address is displayed in message EZD1263I. This message
is issued by the Load Balancing Advisor. Look for this message in
the system log for the system on which the Advisor is running, at
a time that corresponds approximately to the time at which this ADNR
was started.

 If routing exists, then check the ADNR and GWM log
files for messages  corresponding to the time when the connection
failed. See the information about diagnosing
problems with the automated domain name registration application in z/OS Communications Server: IP Diagnosis Guide. If the reason for the connection loss cannot
be determined, contact the IBM® 
support center after obtaining the supporting TCP/IP, ADNR, and GWM
documentation.

User response
 Not applicable.

Problem determination
 Not applicable.

Source
 z/OS® Communication
Server TCP/IP other application

Module
 ldgwm.c

Routing code
 1

Descriptor code
 2

Example
  EZD1271E ADNR CONNECTION TO GWM 10.42.11.182 IS NO LONGER ACTIVE