DISPLAY TCPIP,,HELP |
TRACE |
V2R1 |
New parameter that provides a help message
for the new DISPLAY TCPIP,,TRACE command syntax. |
Real-time application-controlled TCP/IP
trace NMI |
DEFADDRT |
V1R12 |
The syntax of the new DISPLAY TCPIP,,NETSTAT,DEFADDRT
command is displayed. |
Configurable default address selection policy table |
N/A |
V1R12 |
The new OSAINFO command is displayed as
one of the supported DISPLAY TCPIP commands. |
Operator command to query and display OSA information |
OSAINFO |
V1R12 |
The syntax of the new OSAINFO command is
displayed. |
Operator command to query and display OSA information |
ROUTE |
V1R12 |
The displayed syntax of the DISPLAY TCPIP,,NETSTAT,ROUTE
command includes the new RADV command modifier. |
Enhancements to IPv6 router advertisement |
DISPLAY TCPIP,,OMPROUTE |
IPV6OSPF,IF,NAME=if_name |
V2R1 |
The report is enhanced to display
the number of IPv6 OSPF packets that are received on the interface
that contained errors (# ERR PKTS RCVD), such as bad packet type,
bad length, or bad checksum. |
Fix OMPROUTE vulnerability to malformed
packets |
IPV6OSPF,NBR,ID=router-id |
V2R1 |
The report is enhanced to display
the number of IPv6 link state advertisements received (# ERR LS RCVD)
from the neighbor that were unexpected or contained errors, such as
bad advertisement type, bad length, or bad checksum. |
Fix OMPROUTE vulnerability to malformed
packets |
OSPF,IF,NAME=if_name |
V2R1 |
The report is enhanced to display
the number of IPv4 OSPF packets that were received on the interface
that contained errors (# ERR PKTS RCVD), such as bad packet type,
bad length, or bad checksum. |
Fix OMPROUTE vulnerability to malformed
packets |
OSPF,NBR,IPADDR=ip_addr |
V2R1 |
The report is enhanced to display
the number of IPv4 link state advertisements received (# ERR LS RCVD)
from the neighbor that were unexpected or contained errors, such as
bad advertisement type, bad length, or bad checksum. |
Fix OMPROUTE vulnerability to malformed
packets |
OPTIONS |
V2R1 |
Added new report to display
the OMPROUTE GLOBAL_OPTIONS configuration information. Ignore_Undefined_Interfaces
is the only one global option. |
OMPROUTE adjacency preservation improvements |
RT6TABLE |
V2R1 |
- Added the PRTABLE=ALL parameter to display routes in all OMPROUTE
IPv6 policy-based routing tables.
- Added the PRTABLE=tablename parameter to display routes in a single
OMPROUTE IPv6 policy-based routing table
|
IPv6 support for policy-based routing |
DISPLAY TCPIP,,OMPROUTE (continued) |
IPV6OSPF,ALL |
V1R13 |
Report includes the new RouterID configuration
source definition from an OSPF configuration statement or the assigned
interface name. The source is displayed after the RouterID value. |
TCP/IP serviceability
enhancements |
OSPF,STATISTICS |
V1R13 |
Report includes the new RouterID configuration
source definition from an OSPF configuration statement or the assigned
interface name. The source is displayed after the RouterID value. |
TCP/IP serviceability
enhancements |
RT6TABLE |
V1R12 |
Default routes learned from IPv6 router
advertisements are displayed with a metric of 1 when the router advertisement
indicated a preference of high, 2 when the router advertisement indicated
a preference of medium, or 3 when the router advertisement indicated
a preference of low. In past releases, these routes were always displayed
with a metric of 0. |
Configurable default address selection policy table |
DISPLAY TCPIP,,OSAINFO |
N/A |
V1R12 |
New command that displays OSA-Express QDIO
datapath device information, including registered addresses and routing
variables. |
Operator command to query and display OSA information |
DISPLAY TCPIP,,STOR |
N/A |
V2R1 |
Displays the 64-bit storage
allocated for Shared Memory Communications over Remote Direct Memory
Access (SMC-R) processing. |
Shared Memory Communications over Remote
Direct Memory Access |
N/A |
V1R13 |
Output display is restructured to reflect
the 31-bit storage and 64-bit storage usage. See message EZZ8453I
for details. |
Increased
CTRACE and VIT capacity |
N/A |
V1R12 |
Dynamic LPA module storage removed from
ECSA storage usage and placed in new CSA MODULES storage usage. |
Enhancements
to the TCP/IP storage display |
DISPLAY TCPIP,,TRACE |
N/A |
V2R1 |
New command that provides information
about applications that are using the Real-time application-controlled
TCP/IP trace NMI. |
Real-time application-controlled TCP/IP
trace NMI |
MODIFY CSSMTP |
DISPLAY,CONFIG |
V2R1 |
Displays the Header configuration statement |
CSSMTP mail message date header handling
option |
FLUSHRetry,AGE=day |
V1R13 |
Flush extended retry mail over AGE= days
old. |
CSSMTP extended retry |
DISPLAY,CONFIG |
V1R13 |
Displays the new JESSyntaxErrLimit statement
value. |
CSSMTP enhancements |
DISPLAY,CONFIG |
V1R12 |
Command to display the SMF119 configuration
parameters. |
Management
data for CSSMTP |
MODIFY DCAS |
N/A |
V1R12 |
New command which provides the modification
of DCAS debug level after the DCAS server has been started. |
Digital certificate access server (DCAS) MODIFY command
for debug level |
MODIFY DMD |
DISPLAY |
V2R1 |
The display output includes
the setting of the new DefaultLogLimit parameter. |
Limit defensive filter logging |
REFRESH |
V2R1 |
The value of the new DefaultLogLimit
parameter can be changed by updating the DMD configuration file and
issuing MODIFY DMD,REFRESH. |
Limit defensive filter logging |
MODIFY IKED |
DISPLAY |
V1R12 |
Report includes the following new field:
FIPS140 |
IPSec support
for FIPS 140 cryptographic mode |
MODIFY NSSD |
DISPLAY |
V1R12 |
Report includes the following new fields: - FIPS140
- URLCacheInterval
- CertificateURL
- CertificateBundleURL
|
|
REFRESH |
V1R12 |
Updated to indicate whether cached certificate
URL data should be flushed. |
|
MODIFY OMPROUTE |
IPV6OSPF,ALL |
V1R13 |
Report includes the new RouterID configuration
source definition from an OSPF configuration statement or the assigned
interface name. The source is displayed after the RouterID value. |
TCP/IP serviceability
enhancements |
OSPF,STATISTICS |
V1R13 |
Report includes the new RouterID configuration
source definition from an OSPF configuration statement or the assigned
interface name. The source is displayed after the RouterID value. |
TCP/IP serviceability
enhancements |
MODIFY omproute_procname |
RT6TABLE |
V2R1 |
- Added the PRTABLE=ALL parameter to display routes in all OMPROUTE
IPv6 policy-based routing tables.
- Added the PRTABLE=tablename parameter to display routes in a single
OMPROUTE IPv6 policy-based routing table
|
IPv6 support for policy-based routing |
MODIFY RESOLVER |
DISPLAY |
V1R13 |
When the autonomic quiesce of unresponsive name servers function
is active, message EZD2035I is displayed for each name server in the
global TCPIP.DATA file. |
System resolver autonomic quiescing of unresponsive name servers |
REFRESH[,SETUP=] |
V1R13 |
When the autonomic quiesce of unresponsive
name servers function is active after completion of the MODIFY command
processing, message EZD2035I is displayed for each name server in
the global TCPIP.DATA file. |
System resolver autonomic quiescing of unresponsive
name servers |
VARY TCPIP,, DATTRACE |
N/A |
V1R12 |
Data trace will automatically create new
start and end records for TCP and UDP sockets. |
Data trace records for socket data flow start and end |
VARY TCPIP,,DROP |
PORT=, JOBNAME=, ASID= |
V1R12 |
The command is enhanced to drop all TCP
connections associated with server applications. The new parameters
are used as filters to identify the server or servers whose TCP connections
should be dropped |
Command to drop
all connections for a server |
VARY TCPIP,,SYNTAXCHECK |
N/A |
V2R1 |
New command that can be used
to check the syntax of TCP/IP profile configuration statements without
affecting the system operation or network configuration. |
Check TCP/IP profile syntax without applying
configuration changes |