This section describes the cause codes that can be displayed.
Decimal code | Hexadecimal code | Meaning | Additional diagnostic information |
---|---|---|---|
1 | 1 | Unassigned number Explanation: The number requested by the calling user cannot be reached because it is not currently assigned to any user by the network. |
See Diagnostic code for cause codes 1, 2, and 49. |
2 | 2 | No route to specified transit network Explanation: The equipment issuing this cause received a request to route the call through a transit network that it does not recognize. The equipment issuing this cause does not recognize the transit network because the network does not exist, or the network exists but does not serve the equipment that is sending this cause. This message is network dependent. |
None available |
3 | 3 | No route to destination Explanation: The called user cannot be reached because the network that serves the called user is inaccessible. |
See Diagnostic code for cause codes 1, 2, and 49. |
10 | A | VPCI/VCI unacceptable | None available |
16 | 10 | Normal call clearing Explanation: The call is being cleared because one of the users involved in the call has requested that the call be cleared. |
None available |
17 | 11 | User busy Explanation: The called user has indicated an inability to accept another call, although the called user equipment is compatible with the call. |
None available |
18 | 12 | No user responding Explanation: The user did not respond to a call establishment message with a connect indication within the time allocated. |
None available |
21 | 15 | Call rejected Explanation: The called user did not accept this call, although it could have been accepted because the called user was neither busy nor incompatible. |
See Diagnostic code for cause code 21. |
22 | 16 | Number changed Explanation: The called party number indicated by the calling user is no longer assigned. |
New destination New destination is formatted as the called party number information element, including the information element identifier. Transit network selection might also be included. |
23 | 17 | User rejects CLIR Explanation: The user rejects all calls with calling line identification restriction (CLIR). |
None available |
26 | 1A | Not-selected user clearing Explanation: The user has not been routed the incoming call. |
None available |
27 | 1B | Destination out of order Explanation: The destination cannot be reached because a signaling message could not be delivered to the called user. |
None available |
28 | 1C | Incorrect number format (address incomplete) Explanation: The called user cannot be reached because the called party number is not a valid format or is not complete. |
None available |
30 | 1E | Response to status inquiry Explanation: This value is included in the status message after the prior receipt of a status inquiry message. |
None available |
31 | 1F | Normal, unspecified Explanation: A normal event occurred and no other cause in the normal event class applies. |
None available |
35 | 23 | Requested VPCI/VCI not available | None available |
36 | 24 | VPCI/VCI assignment failure | None available |
37 | 25 | User cell rate not available | None available |
38 | 26 | Network out of order Explanation: The network is not functioning correctly, and the condition is likely to last a long time. Immediately trying a call again is not likely to be successful. |
None available |
41 | 29 | Temporary failure Explanation: The network is not functioning correctly, but the condition is not likely to last a long time. Another call attempt can be tried almost immediately. |
None available |
43 | 2B | Access information discarded Explanation: The network could not deliver access information to the called user as requested. Access information includes low-layer compatibility and high-layer information. |
See Information element identifier. Multiple information element identifiers might be included. |
45 | 2D | No VPCI/VCI available | None available |
47 | 2F | Resource unavailable, unspecified Explanation: A resource unavailable event occurred and no other cause in the resource unavailable class applies. |
None available |
49 | 31 | Quality of service not available Explanation: The requested quality of service cannot be provided. |
See Diagnostic code for cause codes 1, 2, and 49. |
51 | 33 | User cell rate not available | See ATM user cell rate subfield identifier. Multiple ATM user cell rate subfield identifiers might be included. |
57 | 39 | Bearer capability not authorized | None available |
58 | 3A | Bearer capability not presently available Explanation: The requested bearer service is implemented by the equipment, but it is not available at this time. |
None available |
63 | 3F | Service or option not available, unspecified Explanation: A service or option is unavailable and no other cause in the service or option-not-available class applies. |
None available |
65 | 41 | Bearer capability not implemented Explanation: The equipment issuing this cause does not support the requested bearer capability. |
None available |
73 | 49 | Unsupported combination of traffic parameters | None available |
78 | 4E | AAL parameters cannot be supported | None available |
79 | 4F | Service or option not implemented, unspecified
Explanation: A service or option is not implemented and no other cause in the service or option-not-implemented class applies. |
None available |
81 | 51 | Incorrect call reference value Explanation: The equipment sending the cause received a message with a call reference that is not currently in use on the user-network interface. |
None available |
82 | 52 | Identified channel does not exist Explanation: The equipment issuing this cause received a request to establish a call that has low-layer compatibility, high-layer compatibility, or other compatibility attributes that it cannot accommodate. |
See Virtual path connection identifier (VPCI) and virtual channel identifier (VCI). |
88 | 58 | Incompatible destination Explanation: The equipment issuing this cause received a request to establish a call that has low-layer compatibility, high-layer compatibility, or other compatibility attributes that it cannot accommodate. |
See Information element identifier. Multiple information element identifiers might be included. |
89 | 59 | Incorrect endpoint reference | None available |
91 | 5B | Incorrect transit network selection Explanation: An incorrectly formatted transit network identifier was received. |
None available |
92 | 5C | Too many pending add party requests | None available |
93 | 5D | AAL parameters cannot be supported | None available |
95 | 5F | Incorrect message, unspecified Explanation: A message event occurred and no other cause in the incorrect message class applies. |
None available |
96 | 60 | Mandatory information element is missing Explanation: The equipment sending this cause received a message that is missing an information element required to process the message. |
See Information element identifier. Multiple information element identifiers might be included. |
97 | 61 | Message type does not exist or is not implemented
Explanation: The equipment sending this cause received a message that it does not recognize because the message is not defined or it is defined but not implemented by the equipment sending the cause. |
See Message type. |
99 | 63 | Information element does not exist or is not implemented
Explanation: The equipment sending this cause received a message that included an information element that is not recognized because the identifier is not defined or it is defined but not implemented by the equipment sending the cause. However, the equipment issuing the cause does not require the information element to be present in the message for processing. |
See Information element identifier. Multiple information element identifiers might be included. |
100 | 64 | Incorrect information element contents Explanation: The equipment sending this cause received an information element that it has implemented, but one or more of the parameters in the information element are coded incorrectly or not implemented. |
See Information element identifier. Multiple information element identifiers might be included. |
101 | 65 | Message not compatible with call state Explanation: A message has been received that is incompatible with the call state. |
See Message type. |
102 | 66 | Recovery on timer expiration Explanation: A procedure has been initiated by the expiration of a time in association with Q.2931 error handling procedures. |
See Timer number. |
104 | 68 | Incorrect message length | None available |
111 | 6F | Protocol error, unspecified Explanation: A protocol error event occurred and no other cause in the protocol error class applies. |
None available |
121 | 79 | Interworking, unspecified Explanation: Interworking occurred with a network that does not provide causes for actions that it takes. The precise cause for a message that is being sent cannot be ascertained. |
None available |