Table 1 presents
the headings that appear in a list printed at the printer or terminal
when you request information for DFSMShsm-managed or migration volumes
and a description of the information that appears with those headings.
Table 1. Headings of Output When
You Request Information from the Migration Control Data Set for DFSMShsm-Managed
or DASD Migration Volume Printer Output
Heading
|
Terminal Label
|
Description
|
---|
VOLSER |
VOL |
The number under this heading is
the volume serial number of the DFSMShsm-managed or migration volume. |
DEVICE
TYPE
|
DEVTYP |
The name under this heading is the
name of the type of unit on which this volume can reside. |
VOL
TYPE
|
VOLTYPE |
The DFSMShsm category assigned to this volume
is PRIM, P SMS, LEV 1, L1-OV, or LEV 2. UN indicates that
a DASD migration level 2 volume has not been assigned to a key range
and that a tape level 2 migration volume has not been selected for
migration by any processing unit. |
THRESHOLD
HI---LO
|
HI-THRESH
LO-THRESH
|
This field contains the high and
low threshold of occupancy defined for this volume. The low threshold
of occupancy applies only to DFSMShsm-managed volumes. The values
listed for SMS-managed volumes are those that DFSMShsm last retrieved from
SMS and may not be the most current values. The most current values
for SMS-managed volumes are reflected in the volume’s associated storage
group. |
FRAG
INDEX
|
FRAG |
The number under this heading is
a qualitative measure of the scattered free space on the volume. The
values of the index can range from 0 to 1. The higher the value, the
more fragmented the free space on the volume. |
HOSTID |
AUTO-MIG |
The character listed is the processor
ID of a processor by which this volume was assigned the automatic
space management attribute. A NO indicates that the volume has not
been assigned the automatic space management attribute by any processor.
This field applies to DFSMShsm-managed volumes only. |
HOSTID |
BACK |
The character listed is the processor
ID of a processor by which this volume was assigned the automatic
backup attribute. A NO indicates that the volume was not assigned
the automatic backup attribute by any processor. This field applies
to DFSMShsm-managed volumes only. |
DUMP |
The character listed is the processor
ID of a processor by which this volume was assigned the automatic
dump attribute. A NO indicates that the volume was not assigned the
automatic dump attribute by any processor. This field applies to DFSMShsm-managed
volumes only. |
AUTO
RECALL
|
AUTO-RECALL |
YES or Y indicates that the volume
with the automatic recall attribute is eligible to receive recalled
data sets. This field applies to DFSMShsm-managed volumes only. |
SDSP
AVAIL
|
SDSP |
YES or Y indicates that a small-data-set-packing
data set was created on this volume. This field applies to migration
level 1 volumes only. |
MIN AGE |
MIN-AGE |
This is the inactive age of the most
recently migrated data set from the volume that was processed the
last time volume space management ran. |
MIGRATED
DS--TRKS
|
MIG DS |
This is the number of data sets that
were migrated or deleted from the volume during the last volume space
management. |
MIG TRKS |
This is the number of tracks of data
that were migrated or deleted from the volume during the last volume
space management. |
DATE--TIME
LAST MIGRATED
|
MIGDATE-TIME |
This is the date of the last volume
space management of this volume. |
SPACE-MGMT
TYPE/AGE
|
SPACE-MGMT |
This is the type of space management
assigned to this volume. MIG indicates migration, DBA indicates delete-by-age,
and DBU indicates delete-if-backed-up. |
AGE |
This is the number of days a data
set on this volume must be inactive before it is eligible for space
management. DEFAULT indicates that the age criteria for the volume
or all DFSMShsm-managed volumes is not specified in the SETSYS command
and DFSMShsm determines
the age based on whether DFSMShsm is running in a single processor
environment or multiple processor environment. This field applies
only to DFSMShsm-managed volumes. |
BACKDEV
CATEGORY
|
BACKUP-DEVICE
CATEGORY
|
This field contains the backup device
category assigned to this volume. If no category was assigned, the
field contains ANY. This field applies only to DFSMShsm-managed volumes. |
DUMP CLASS |
DUMPCLASS |
This field contains the dump class
of the DFSMShsm-managed or migration volume. The values listed for
SMS-managed volumes are those that DFSMShsm last retrieved from SMS and may
not be the most current values. The most current values for SMS-managed
volumes are reflected in the volume’s associated storage group. |
Note: A
field containing only *** is not applicable to this volume (see individual
field descriptions in the sample lists).
|
Figure 1 is a
sample printer list of a specific migration volume when you specify
the MIGRATIONVOLUME parameter. The printer list format for a specific
migration volume, for all the DFSMShsm-managed and migration volumes,
or for all the DFSMShsm-managed volumes or migration volumes has the
same format as described in Figure 1.
If you request information for more than one volume, the list has
multiple entries.
Figure 1. Sample Printer List of Migration Volumes from
the Migration Control Data Set When You Specify MIGRATIONVOLUME and
MIGRATIONCONTROLDATASET1- DFSMSHSM CONTROL DATASET - MIGRATE VOLUME-MCDS--- LISTING ----- AT 14:09:45 ON 08/12/02 FOR SYSTEM=PCC
VOLSER DEVICE VOLUME THRESH FRAG HOSTID AUTO- AUTO SDSP MIN MIGRATED DATE---TIME SPACE-MGMT BUDEV DUMP
TYPE TYPE HI--LOW INDX MIG--BACK-DUMP RECL ELIG AGE DS-----TRKS LAST MIGRATED TYPE/AGE CATGY CLASS
MIG101 3390 LEV 1 075 *** .018 **** **** 8 *** YES *** 00115 009636 00/00/00 00:00 *** *** **** DUMPCLB
MIG102 3390 LEV 1 075 *** .012 **** **** 8 *** NO *** 00010 000125 00/00/00 00:00 *** *** **** DUMPCLC
MIG103 3390 LEV 1 075 *** .079 **** **** 8 *** NO *** 00005 000070 00/00/00 00:00 *** *** **** DUMPCLC
OVFML1 3390 L1-OV 080 *** .000 **** **** C *** NO *** 00012 745930 00/00/00 00:00 *** *** **** DUMPCLB
----- END OF - MIGRATE VOLUME - LISTING -----
1- DFSMSHSM CONTROL DATASET - MIGRATE VOLUME-MCDS--- LISTING ----- AT 14:09:54 ON 08/12/02 FOR SYSTEM=PCC
Figure 2 is a
sample terminal list for all the DFSMShsm-managed and migration volumes
when you have specified the VOLUME and TERMINAL parameters. The terminal
list format for a specific DFSMShsm-managed volume or migration volume,
or for all the DFSMShsm-managed volumes or migration volumes, has
the same format as described in Figure 2.
If you request information for only one volume, the list has one entry.
Figure 2. Sample Terminal List of All Volumes from the Migration
Control Data Set When You Specify VOLUME and TERMINAL
VOL=SMS001 DEVTYP=3380 VOLTYPE=P SMS MIGDS=0001 MIGTRKS=****
MIGDATE-TIME=89/01/28 12:01 FRAG=.069 HI-THRESH=020 LO-THRESH=010
MIN-AGE=*** BACKUP-DEVICE-CATEGORY=**** AUTO-RECALL=*
SDSP=*** SPACE-MGMT=MIG AGE=*** AUTO-HOST MIG=** BACK=** DUMP=**
DUMPCLASS = ********
VOL=M2TP02 DEVTYP=3480 MIGTYP=L2-TP VOL FULL=Y VOL EMPTY=N DELDS=0000
SP-MGT-DATE=88/01/10 PSWD=Y EXP=N RACF=N AVAIL=Y IN USE=-NO- SELD=N
Table 2 presents the headings of the
output when DFSMShsm lists
information from the MCDS for tape migration level 2 volumes.
Table 2. Headings of Output
When You Request Information from the MCDS for Tape Migration Level
2 Volumes Printer Output
Heading
|
Terminal Label
|
Description
|
---|
VOLSER |
VOL |
This field contains the volume serial number of the tape migration
level 2 volume. |
DEVICE
TYPE
|
DEVTYP |
This field contains the name of the unit where this volume
can be allocated. |
MIGRATE
TYPE
|
MIGTYP |
L2-TP: The tape volume was added as a tape migration level
2 volume. |
VOL
FULL
|
VOL FULL |
A YES or Y indicates that an end-of-tape marker was reached
or a data movement error occurred while DFSMShsm was writing on the tape volume. |
DATE LAST VOL
SP MANAGEMENT
|
SP-MGT-DATE |
This is the date of the last volume space management of this
volume. |
VOL
EMPTY
|
VOL EMPTY |
A YES or Y indicates that the volume is empty. |
DELETED
DS
|
DELDS |
This is the number of data sets deleted from the volume during
the last volume space management. |
PSWD |
PSWD |
A YES or Y indicates that the tape volume is password-protected. |
EXP |
EXP |
A YES or Y indicates that this tape volume is protected by
an expiration date. |
RACF |
RACF |
A YES or Y indicates that the tape volume is RACF-protected. |
AVAILABLE |
AVAIL |
A YES or Y indicates that the tape volume is available. |
IN USE |
IN USE |
NO: The tape volume is not being used. MIGD: Data set migration
is using the tape volume.
MIGV: Volume migration is using
the tape volume.
RECL: Recall is using the tape volume.
RCYS:
The tape volume is a recycle source volume.
RCYT: The tape
volume is a recycle target volume.
DBAU: Data set deletion
or data set retirement is using the tape volume.
|
SELECTED |
SELD |
A YES or Y indicates that the volume is selected. |
IDRC |
IDRC |
Y = Volume contains data in the Improved Data Recording Capability
format. N = Volume does not contain data in the Improved Data
Recording Capability format.
** = Volume is empty—not assigned
the Improved Data Recording Capability format.
|
DUPLEX ALT |
DUPLEX ALT |
volser indicated the volume serial
number of the duplexed alternate. *PEND* indicates an exception
condition and an internal TAPECOPY is pending.
*NONE* indicates
volume not created in a duplexing environment.
|
Figure 3
is a sample of the printer list of tape migration level 2 volumes
when you specify the MIGRATIONLEVEL2(TAPE) parameter and MIGRATIONCONTROLDATASET
parameter.
Figure 3. Sample Printer List of Tape Migration Level
2 Volumes When You Specify MIGRATIONLEVEL2(TAPE) and MIGRATIONCONTROLDATASET
parameter.1- DFSMSHSM CONTROL DATASET - MIGRATE VOLUME-MCDS--- LISTING ----- AT 14:09:45 ON 08/12/02 FOR SYSTEM=PCC
VOLSER DEVICE VOLUME THRESH FRAG HOSTID AUTO- AUTO SDSP MIN MIGRATED DATE---TIME SPACE-MGMT BUDEV DUMP
TYPE TYPE HI--LOW INDX MIG--BACK-DUMP RECL ELIG AGE DS-----TRKS LAST MIGRATED TYPE/AGE CATGY CLASS
MIG101 3390 LEV 1 075 *** .018 **** **** 8 *** YES *** 00115 009636 00/00/00 00:00 *** *** **** DUMPCLB
MIG102 3390 LEV 1 075 *** .012 **** **** 8 *** NO *** 00010 000125 00/00/00 00:00 *** *** **** DUMPCLC
MIG103 3390 LEV 1 075 *** .079 **** **** 8 *** NO *** 00005 000070 00/00/00 00:00 *** *** **** DUMPCLC
OVFML1 3390 L1-OV 080 *** .000 **** **** C *** NO *** 00012 745930 00/00/00 00:00 *** *** **** DUMPCLB
----- END OF - MIGRATE VOLUME - LISTING -----
1- DFSMSHSM CONTROL DATASET - MIGRATE VOLUME-MCDS--- LISTING ----- AT 14:09:54 ON 08/12/02 FOR SYSTEM=PCC
1- DFSMSHSM CONTROL DATASET - MIGRATE VOLUME-MCDS--- LISTING ----- AT 10:44:26 ON 96/11/12 FOR SYSTEM=3090
VOLSER DEVICE MIGRATE VOL DATE VOL LAST VOL DELETED PSWD EX RACF AVAILABLE IN USE SELECTED IDRC DUPLEX
TYPE TYPE FULL SP MANAGED EMPTY DS ALT
A16010 3480 L2-TP NO 00/00/00 NO 0000 YES NO NO YES -NO- NO N A16011
A16012 3480 L2-TP NO 00/00/00 NO 0000 YES NO NO YES -NO- NO N *NONE*
A16014 3480 L2-TP NO 00/00/00 NO 0000 YES NO NO YES -NO- NO N *PEND*
----- END OF - MIGRATE VOLUME - LISTING -----
Table 3 presents
the headings that appear when you request a list of DFSMShsm-managed
volume information from the backup control data set.
Table 3. Headings of Output When
You Request Information for DFSMShsm-Managed Volumes from the Backup
Control Data Set Printer Output
Heading
|
Terminal Label
|
Description
|
---|
VOLSER |
VOL |
The number under this heading is the volume serial number of
the volume. |
ICF catalog |
VSAM CTLG |
ICF catalogs are no longer supported. |
CATALOG
ON VOLSER
|
CTLG VOL |
This field contains the volume serial number of the volume
on which the catalog resides, SYSRES, or blanks. |
LAST BACKED UP
DATE TIME
|
LAST BACKED
UP ON
|
This field contains the date and time of the last volume backup
of this volume. |
DUMP CLASS |
DUMPCLASS |
This field contains the dump class of the DFSMShsm-managed
or migration volume. |
Figure 4 is a
sample of a printer list of information about DFSMShsm-managed volumes
from the BCDS.
Figure 4. Sample Printer List from the BCDS When You Specify
VOLUME, PRIMARYVOLUME(volser) and BACKUPCONTROLDATASET ---- DFSMShsm CONTROL DATASET -PRIMARY VOLUME-BCDS--- LISTING -----
AT 13:31:36 ON 89/12/31 FOR SYSTEM=SYSA
CATALOG LAST BACKED UP
VOLSER SMS OWNED BY ICF CATALOG ON VOLSER DATE TIME DUMPCLASS DUMPED TIME EXP DATE
PRIM01 NO NOT OWNED BY A ICF CATALOG PRIM01 88/01/15 00:59 DCLASS01 88/01/31 01:59 *NOLIMIT
DCLASS02 88/01/31 01:59 88/12/31
DCLASS03 88/01/31 01:59 88/12/31
DCLASS04 88/01/31 01:59 88/12/31
DCLASS05 88/01/31 01:59 88/12/31