| 1 |
0 (X'00') |
The volume is Preserve Mirror Capable. |
| 2 |
0 (X'00') |
Preserve Mirror checking not requested. |
| 3 |
0 (X'00') |
Preserve Mirror checking was not
done because the volume is not FlashCopy capable. |
| 0 |
. |
The volume is not currently Preserve
Mirror capable. The volume reason will have a non-zero value indicating
the current cause for being incapable. |
| 0 |
1 (X'01') |
The maximum number of FlashCopy relations
are active on the volume. |
| 0 |
2 (X'02') |
Reserved |
| 0 |
3 (X'03') |
Reserved |
| 0 |
4 (X'04') |
The volume's secondary is a Concurrent
Copy source. |
| 0 |
5 (X'05') |
The volume's secondary is an XRC
primary. |
| 0 |
6 (X'06') |
The volume's secondary currently
is inhibited from starting any FlashCopy operations. |
| 0 |
7 (X'07') |
A Volume Level (Phase 1) FlashCopy
relation is active on this volume's secondary. |
| 0 |
8 (X'08') |
The maximum number of FlashCopy relations
for the volume's secondary volume's SFI. |
| 0 |
9 (X'09') |
The volume's secondary is inaccessible. |
| 0 |
10 (X'0A') |
The volume's secondary is a Global
Mirror primary. |
| 0 |
11 (X'0B') |
A full volume target relationship
already exists in the volume's secondary. |
| 0 |
12 (X'0C') |
A full volume source relationship
already exists on the volume's secondary and target capability was
requested. |
| 0 |
13 (X'0D') |
The maximum number of full volume
source relationships exist on the volume's secondary and source capability
was requested. |
| 0 |
14 (X'0E') |
The volume's secondary is space efficient. |
| 0 |
15 (X'0F') |
The volume's secondary is in the
process of a PPRC cascading failover/failback recovery or the PPRC
volume was established with incremental resync. Target capability
is required. |
| 0 |
16 (X'10') |
The volume's secondary is a cascaded
PPRC volume. |
| 0 |
17 (X'11') |
The volume's secondary is not capable
of dataset-evel FlashCopy operations, |
| 0 |
18 (X'12') |
The volume's secondary is not capable
of inhibiting writes to the source. |
| 0 |
19-127 (X'13-1B') |
Reserved |
| 0 |
128 (X'80') |
The volume is not a PPRC primary
device. For target checking, software can treat this as capable. |
| 0 |
129 (X'81') |
The volume's secondary and the control
volume's secondary are not in the same SFI. |
| 0 |
130 (X'82') |
The volume's PPRC relationship is
not full duplex. |
| 0 |
131 (X'83') |
The volume's secondary's SFI does
not have the microcode installed that supports IBM Remote Pair FlashCopy
(Preserve Mirror). |
| 0 |
132 (X'84') |
The control volume is not a PPRC
primary. |
| 0 |
133 (X'85') |
The command was received while the
subsystem was installing a new microcode load and the level of one
or both CECs does not support IBM Remote Pair FlashCopy (Preserve
Mirror). |
| 0 |
134 (X'86') |
An error was detected when sending
the command to the volume's secondary. |
| 0 |
135 (X'87') |
The volume is space efficient and
target capability was requested. Space efficient volumes are not
allowed as the target of a Preserve Mirror operation. |
| 0 |
208 (X'D0') |
The volume is a PPRC primary and the Preserve
Mirror feature is not enabled. |
| 0 |
209 (X'D1') |
PPRC Primary not Full Duplex or Preserve Mirror
version 2 not installed. |
| 0 |
256 (X'100') |
The controller does not have the Preserve Mirror
feature enabled. |