IBM Tivoli Storage Manager, Version 7.1

UPDATE DEVCLASS (Update a 3590 device class)

Use the 3590 device class when you are using 3590 tape devices.

AIX operating systems Linux operating systems If you are defining a device class for devices that are to be accessed through a z/OS® media server, see UPDATE DEVCLASS (Update a 3590 device class for z/OS media server).

Privilege class

To issue this command, you must have system privilege or unrestricted storage privilege.

Syntax


>>-UPDate DEVclass--device_class_name--------------------------->

>--+--------------------------+--+------------------------+----->
   '-LIBRary--=--library_name-'  '-FORMAT--=--+-DRIVE---+-'   
                                              +-3590B---+     
                                              +-3590C---+     
                                              +-3590E-B-+     
                                              +-3590E-C-+     
                                              +-3590H-B-+     
                                              '-3590H-C-'     

>--+----------------------+------------------------------------->
   '-ESTCAPacity--=--size-'   

>--+-----------------------------------+------------------------>
   '-PREFIX--=--+-ADSM---------------+-'   
                '-tape_volume_prefix-'     

>--+----------------------------+--+-----------------------+---->
   '-MOUNTRetention--=--minutes-'  '-MOUNTWait--=--minutes-'   

>--+---------------------------+-------------------------------><
   '-MOUNTLimit--=--+-DRIVES-+-'   
                    +-number-+     
                    '-0------'

Parameters

device_class_name (Required)

Specifies the name of the device class to be defined.

LIBRary

Specifies the name of the defined library object that contains the tape drives that can be used by this device class. For information about defining a library object, see the DEFINE LIBRARY command.

FORMAT

Specifies the recording format to be used when data is written to sequential access media. This parameter is optional.

The following tables list the recording formats, estimated capacities, and recording format options for 3590 devices:

Table 1. Recording formats and default estimated capacities for 3590
Format	Estimated Capacity	Description
DRIVE	–	The server selects the highest format that is supported by the drive on which a volume is mounted. Attention: Avoid specifying DRIVE when a mixture of drives is used within the same library. For example, do not use this option for a library that contains some drives that support recording formats superior to other drives.
3590B	10.0 GB	Uncompressed (basic) format
3590C	See note 20.0 GB	Compressed format
3590E-B	10.0 GB	Uncompressed (basic) format, similar to the 3590B format
3590E-C	See note 20.0 GB	Compressed format, similar to the 3590C format
3590H-B	30.0 GB (J cartridge-standard length) 60.0 GB (K cartridge-extended length)	Uncompressed (basic) format, similar to the 3590B format
3590H-C	See note 60.0 GB (J cartridge-standard length) 120.0 GB (K cartridge-extended length)	Compressed format, similar to the 3590C format
Note: If this format uses the tape drive hardware compression feature, depending on the effectiveness of compression, the actual capacity might be greater than the listed value.

Table 2. 3590 device recording format selections
Device	Format
Device	3590B	3590C	3590E-B	3590E-C	3590H-B	3590H-C
3590 Ultra-SCSI 3590E 3590H	Read/Write Read/Write Read Read	Read/Write Read/Write Read Read	– – Read/Write Read	– – Read/Write Read	– – – Read/Write	– – – Read/Write

ESTCAPacity

Specifies the estimated capacity for the sequential access volumes that are categorized by this device class. This parameter is optional.

You can specify this parameter if the default estimated capacity for the device class is inaccurate due to compression of data.

You must specify this value as an integer followed by K (kilobytes), M (megabytes), G (gigabytes), or T (terabytes). For example, ESTCAPACITY=5M specifies that the estimated capacity for a volume in this device class is 5 MB.

The smallest value that is allowed is 1 MB (that is, ESTCAPACITY=1M). To force the IBM® Tivoli® Storage Manager server to determine the estimated capacity for the volumes that are assigned to this device class, specify ESTCAPACITY="".

PREFIX

Specifies the high-level qualifier of the data set name that the server writes into the sequential access media labels. For each sequential access volume assigned to this device class, the server uses this prefix to create the data set name. This parameter is optional. The maximum length of this prefix is 8 characters.

If you previously established a media label naming convention that supports your current management system, consider the use of a volume prefix that conforms to your naming conventions.

Values specified for this parameter must meet the following conditions:

The value is to be made up of qualifiers, which can be a maximum of eight characters including periods. For example, the following value is acceptable:
```
     AB.CD2.E
```
The qualifiers must be separated by a single period.
The first letter of each qualifier must be alphabetic or national (@,#,$), followed by alphabetic, national, hyphen, or numeric characters.

An example of a tape volume data set name that uses the default prefix is ADSM.BFS.

MOUNTRetention

Specifies the number of minutes to retain an idle sequential access volume before dismounting it. This parameter is optional. You can specify a number from 0 to 9999.

This parameter can improve response time for sequential access media mounts by leaving previously mounted volumes online.

However, for EXTERNAL library types, setting this parameter to a low value (for example, two minutes) enhances device sharing between applications.

MOUNTWait

Specifies the maximum number of minutes the server will wait for an operator to respond to a request to either mount a volume in a drive in a manual library or check in a volume to be mounted in an automated library. This parameter is optional. If the mount request is not satisfied within the specified amount of time, the mount request is canceled. You can specify a number from 0 to 9999.

MOUNTLimit

Specifies the maximum number of sequential access volumes that can be simultaneously mounted for the device class. This parameter is optional. You can specify a number from 0 to 4096.

If you plan to use the simultaneous-write function, ensure that sufficient drives are available for the write operation. If the number of drives needed for a simultaneous-write operation is greater than the value of the MOUNTLIMIT parameter for a device class, the transaction fails.

The following are possible values:

DRIVES: Specifies that every time a mount point is allocated, the number of drives that are defined to the library is used to calculate the true value (including online status).
Note: For EXTERNAL library types, do not specify DRIVES for the MOUNTLIMIT value. Specify the number of drives for the library as the MOUNTLIMIT value.
number: Specifies the maximum number of drives that are used concurrently in this device class by the server. This value must never exceed the number of drives that are defined and online in the library that services this device class.
0 (zero): Specifies that no new transactions can gain access to the storage pool. Any current transactions continue and complete, but new transactions are terminated.

Feedback