DB2 Version 10.1 for Linux, UNIX, and Windows

BACKUP DATABASE command

Creates a backup copy of a database or a table space.

For information about the backup operations supported by DB2® database systems between different operating systems and hardware platforms, see "Backup and restore operations between different operating systems and hardware platforms".

Scope

In a partitioned database environment, if no database partitions are specified, this command affects only the database partition on which it is executed.

If the option to perform a partitioned backup is specified, the command can be called only on the catalog database partition. If the option specifies that all database partition servers are to be backed up, it affects all database partition servers that are listed in the db2nodes.cfg file. Otherwise, it affects the database partition servers that are specified on the command.

Authorization

One of the following authorities:
  • SYSADM
  • SYSCTRL
  • SYSMAINT

Required connection

Database. This command automatically establishes an exclusive connection to the specified database.
Note: If a connection to the specified database already exists, that connection will be terminated and a new connection established specifically for the backup operation. The connection is terminated at the completion of the backup operation.

Command syntax

Read syntax diagramSkip visual syntax diagram
>>-BACKUP--+-DATABASE-+--database-alias------------------------->
           '-DB-------'                   

>--+-------------------------------------+---------------------->
   '-USER--username--+-----------------+-'   
                     '-USING--password-'     

>--+---------------------------------------------------------------------------------------+-->
   '-ON--+-+-DBPARTITIONNUM--+--| Partition number(s) |----------------------------------+-'   
         | '-DBPARTITIONNUMS-'                                                           |     
         '-ALL DBPARTITIONNUMS--+------------------------------------------------------+-'     
                                '-EXCEPT--+-DBPARTITIONNUM--+--| Partition number(s) |-'       
                                          '-DBPARTITIONNUMS-'                                  

>--+---------------------------------------+--+--------+-------->
   |                .-,---------------.    |  '-ONLINE-'   
   |                V                 |    |               
   '-TABLESPACE--(----tablespace-name-+--)-'               

>--+------------------------+----------------------------------->
   '-INCREMENTAL--+-------+-'   
                  '-DELTA-'     

>--+-----------------------------------------------------------+-->
   +-USE--+-+-TSM--+-| Open sessions |----------+--| Options |-+   
   |      | '-XBSA-'                            |              |   
   |      '-SNAPSHOT--+-----------------------+-'              |   
   |                  +-LIBRARY--library-name-+                |   
   |                  '-SCRIPT--script-name---'                |   
   +-LOAD--library-name--| Open sessions |--| Options |--------+   
   |     .-,-------.                                           |   
   |     V         |                                           |   
   '-TO----+-dir-+-+-------------------------------------------'   
           '-dev-'                                                 

>--+--------------+--+----------------------------+------------->
   '-DEDUP_DEVICE-'  '-WITH--num-buffers--BUFFERS-'   

>--+---------------------+--+----------------+------------------>
   '-BUFFER--buffer-size-'  '-PARALLELISM--n-'   

>--+------------------------------------------------------------------+-->
   '-COMPRESS--+----------------+--+---------+--+-------------------+-'   
               '-COMPRLIB--name-'  '-EXCLUDE-'  '-COMPROPTS -string-'       

>--+------------------------------------+--+--------------+----->
   '-UTIL_IMPACT_PRIORITY--+----------+-'  +-EXCLUDE LOGS-+   
                           '-priority-'    '-INCLUDE LOGS-'   

>--+-------------------+---------------------------------------><
   '-WITHOUT PROMPTING-'   

Partition number(s)

      .-,--------------------------------------------------.      
      V                                                    |      
|--(----db-partition-number1--+--------------------------+-+--)--|
                              '-TO--db-partition-number2-'        

Open sessions

|--+------------------------------+-----------------------------|
   '-OPEN--num-sessions--SESSIONS-'   

Options

|--+-------------------------------+----------------------------|
   '-OPTIONS--+-"options-string"-+-'   
              '-@--file-name-----'     

Command parameters

DATABASE | DB database-alias
Specifies the alias of the database to back up.
USER username
Identifies the user name under which to back up the database.
USING password
The password used to authenticate the user name. If the password is omitted, the user is prompted to enter it.
ON
Backup the database on a set of database partitions.
DBPARTITIONNUM db-partition-number1
Specifies a database partition number in the database partition list.
DBPARTITIONNUMS db-partition-number1 TO db-partition-number2
Specifies a range of database partition numbers, so that all partitions from db-partition-number1 up to and including db-partition-number2 are included in the database partition list.
ALL DBPARTITIONNUMS
Specifies that the database is to be backed up on all partitions specified in the db2nodes.cfg file.
EXCEPT
Specifies that the database is to be backed up on all partitions specified in the db2nodes.cfg file, except those specified in the database partition list.
DBPARTITIONNUM db-partition-number1
Specifies a database partition number in the database partition list.
DBPARTITIONNUMS db-partition-number1 TO db-partition-number2
Specifies a range of database partition numbers, so that all partitions from db-partition-number1 up to and including db-partition-number2 are included in the database partition list.
TABLESPACE tablespace-name
A list of names used to specify the table spaces to be backed up.
ONLINE

Specifies online backup. The default is offline backup. Online backups are only available for databases configured with logarchmeth1 enabled. During an online backup, DB2 obtains IN (Intent None) locks on all tables existing in SMS table spaces as they are processed. S (share locks) are no longer held on LOB data in SMS table spaces during online backup.

INCREMENTAL
Specifies a cumulative (incremental) backup image. An incremental backup image is a copy of all database data that has changed since the most recent successful, full backup operation.
DELTA
Specifies a noncumulative (delta) backup image. A delta backup image is a copy of all database data that has changed since the most recent successful backup operation of any type.
USE
TSM
Specifies that the backup is to use Tivoli® Storage Manager (TSM) as the target device.
XBSA
Specifies that the XBSA interface is to be used. Backup Services APIs (XBSA) are an open application programming interface for applications or facilities needing data storage management for backup or archiving purposes.
SNAPSHOT
Specifies that a snapshot backup is to be taken.
You cannot use the SNAPSHOT parameter with any of the following parameters:
  • TABLESPACE
  • INCREMENTAL
  • WITH num-buffers BUFFERS
  • BUFFER
  • PARALLELISM
  • COMPRESS
  • UTIL_IMPACT_PRIORITY
  • SESSIONS

The default behavior for a snapshot backup is a full database offline backup of all paths that make up the database including all containers, local volume directory, database path (DBPATH), and primary log and mirror log paths (INCLUDE LOGS is the default for all snapshot backups unless EXCLUDE LOGS is explicitly stated).

LIBRARY library-name
Integrated into IBM® DB2 Server is a DB2 ACS API driver for the following storage hardware:
  • IBM TotalStorage SAN Volume Controller
  • IBM Enterprise Storage Server® Model 800
  • IBM Storwize® V7000
  • IBM System Storage® DS6000™
  • IBM System Storage DS8000®
  • IBM System Storage N Series
  • IBM XIV®

If you have other storage hardware, and a DB2 ACS API driver for that storage hardware, you can use the LIBRARY parameter to specify the DB2 ACS API driver.

The value of the LIBRARY parameter is a fully-qualified library file name.

SCRIPT script-name
The name of the executable script capable of performing a snapshot backup operation. The script name must be a fully qualified file name.
OPTIONS
"options-string"
Specifies options to be used for the backup operation. The string will be passed exactly as it was entered, without the double quotation marks.
@ file-name
Specifies that the options to be used for the backup operation are contained in a file located on the DB2 server. The string will be passed to the vendor support library. The file must be a fully qualified file name.

You cannot use the vendoropt database configuration parameter to specify vendor-specific options for snapshot backup operations. You must use the OPTIONS parameter of the backup utilities instead.

OPEN num-sessions SESSIONS
The number of I/O sessions to create between the DB2 product and the TSM product or another backup vendor product. This parameter has no effect when you back up to tape, disk, or other local device. If you specify the INCLUDE LOGS parameter for an online backup, an extra session is created for the OPEN num-sessions SESSIONS parameter after the initial sessions are closed. If you are creating a Single System View (SSV) online backup, for each node backed up, an extra session is created for the OPEN num-sessions SESSIONS parameter after the initial sessions are closed. If you use this parameter with the TSM option, the number of entries that are created in the history file is equal to the number of sessions created.
TO dir | dev

A list of directory or tape device names. The full path on which the directory resides must be specified. If USE TSM, TO, and LOAD are omitted, the default target directory for the backup image is the current working directory of the client computer. This target directory or device must be locally addressable on the database server.

In a partitioned database, the target directory or device must exist on all database partitions, and can optionally be a shared path. The directory or device name may be specified using a database partition expression. For more information about database partition expressions, see "Automatic storage databases".

This parameter can be repeated to specify the target directories and devices that the backup image will span. If more than one target is specified (target1, target2, and target3, for example), target1 will be opened first. The media header and special files (including the configuration file, table space table, and history file) are placed in target1. All remaining targets are opened, and are then used in parallel during the backup operation. Because there is no general tape support on Windows operating systems, each type of tape device requires a unique device driver.

Use of tape devices or floppy disks might generate messages and prompts for user input. Valid response options are:
c
Continue. Continue using the device that generated the warning message (for example, when a new tape has been mounted)
d
Device terminate. Stop using only the device that generated the warning message (for example, when there are no more tapes)
t
Terminate. Abort the backup operation.

If the tape system does not support the ability to uniquely reference a backup image, it is recommended that multiple backup copies of the same database not be kept on the same tape.

LOAD library-name
The name of the shared library (DLL on Windows operating systems) containing the vendor backup and restore I/O functions to be used. It can contain the full path. If the full path is not given, it will default to the path on which the user exit program resides.
DEDUP_DEVICE
Optimizes the format of the backup images for target storage devices that support data deduplication.
WITH num-buffers BUFFERS
The number of buffers to be used. If the number of buffers that you specify is not enough to create a successful backup, then the minimum value necessary to complete the backup is automatically chosen for this parameter. If you are backing up to multiple locations, you can specify a larger number of buffers to improve performance. If you specify the COMPRESS parameter, to help improve performance, you can add an extra buffer for each table space that you specify for the PARALLELISM parameter.
BUFFER buffer-size
The size, in 4 KB pages, of the buffer used when building the backup image. DB2 will automatically choose an optimal value for this parameter unless you explicitly enter a value. The minimum value for this parameter is 8 pages.

If using tape with variable block size, reduce the buffer size to within the range that the tape device supports. Otherwise, the backup operation might succeed, but the resulting image might not be recoverable.

With most versions of Linux, using the default buffer size included with DB2 for backup operations to a SCSI tape device results in error SQL2025N, reason code 75. To prevent the overflow of Linux internal SCSI buffers, use this formula:
bufferpages <= ST_MAX_BUFFERS * ST_BUFFER_BLOCKS / 4
where bufferpages is the value you want to use with the BUFFER parameter, and ST_MAX_BUFFERS and ST_BUFFER_BLOCKS are defined in the Linux kernel under the drivers/scsi directory.
PARALLELISM n
Determines the number of table spaces which can be read in parallel by the backup utility. DB2 will automatically choose an optimal value for this parameter unless you explicitly enter a value.
UTIL_IMPACT_PRIORITY priority
Specifies that the backup will run in throttled mode, with the priority specified. Throttling allows you to regulate the performance impact of the backup operation. Priority can be any number between 1 and 100, with 1 representing the lowest priority, and 100 representing the highest priority. If the UTIL_IMPACT_PRIORITY keyword is specified with no priority, the backup will run with the default priority of 50. If UTIL_IMPACT_PRIORITY is not specified, the backup will run in unthrottled mode. An impact policy must be defined by setting the util_impact_lim configuration parameter for a backup to run in throttled mode.
COMPRESS
Indicates that the backup is to be compressed.
COMPRLIB|ENCRLIB name
Indicates the name of the library that is used during the compression process. For example, db2compr.dll for Windows; libdb2compr.so for Linux and UNIX operating systems. The name must be a fully qualified path that refers to a file on the server. If this parameter is not specified, the default DB2 compression library is used. If the specified library cannot be loaded, the backup fails.
EXCLUDE
Indicates that the compression library is not stored in the backup image.
COMPROPTS|ENCROPTS string
Describes a block of binary data that is passed to the initialization routine in the library. DB2 passes this string directly from the client to the server. Any issues of byte reversal or code page conversion is handled by the compression library. If the first character of the data block is '@', the remainder of the data is interpreted by DB2 as the name of a file found on the server. DB2 then replaces the contents of string with the contents of this file and passes this new value to the initialization routine. The maximum length for string is 1024 bytes.
EXCLUDE LOGS
Specifies that the backup image should not include any log files. When performing an offline backup operation, logs are excluded whether or not this option is specified, with the exception of snapshot backups.Logs are excluded by default in the following backup scenarios:
  • Offline backup of a single-partitioned database.
  • Online or offline backup of a multi-partitioned database, when not using a single system view backup.

If you specify EXCLUDE LOGS with a snapshot backup, log files can be written to during the backup. These log files are included by default in the snapshot backup, but are not usable for recovery. If this backup is restored, the log files must not be extracted from the backup. If the log path was set to the default when the backup was taken, then it is not possible to exclude the log files from being restored and they must be deleted manually after the backup is restored. If the log path was not the default, then the log files can be excluded at restore time by using the LOGTARGET EXCLUDE options with the RESTORE DATABASE command.

INCLUDE LOGS
Specifies that the backup image should include the range of log files required to restore and roll forward this image to some consistent point in time. This option is not valid for an offline backup, with the exception of snapshot backups. INCLUDE LOGS is always the default option for any online backup operation, except a multi-partitioned online backup where each database partition is backed up independently (that is, a non-single system view backup).

If any of the log files that are required for the backup have previously been backed up and are no longer in the log path, then the DB2 database manager retrieves them for backup from the overflow log path, if the path has been set. Otherwise, the database manager retrieves them for backup from the current log path or mirror log path. These log files are removed from the log path after the backup has completed.

WITHOUT PROMPTING

Specifies that the backup will run unattended, and that any actions which normally require user intervention will return an error message.

Note:
  1. If the backup command indicates which partitions in a partitioned database are to be backed up, the backup operation is implicitly performed WITHOUT PROMPTING.
  2. Options that are specified on the BACKUP DATABASE command in a partitioned database environment will be applied on each partition individually. For example, if a backup operation is specified to USE TSM OPEN 3 SESSIONS, DB2 will open three TSM sessions on each partition.

Examples

  1. In the following example, the database WSDB is defined on all 4 database partitions, numbered 0 through 3. The path /dev3/backup is accessible from all database partitions. Database partition 0 is the catalog partition. To perform an offline backup of all the WSDB database partitions to /dev3/backup, issue the following command from database partition 0:
    db2 BACKUP DATABASE wsdb ON ALL DBPARTITIONNUMS TO /dev3/backup

    The backup is performed simultaneously on all partitions. All four database partition backup images will be stored in the /dev3/backup directory, which can be a shared directory accessible from more than one partition, or a locally-mounted directory accessible from each partition individually, or a combination of both.

  2. In the following example database SAMPLE is backed up to a TSM server using two concurrent TSM client sessions. DB2 calculates the optimal buffer size for this environment.
    db2 backup database sample use tsm open 2 sessions with 4 buffers
  3. In the following example, a table space-level backup of table spaces (syscatspace, userspace1) of database payroll is done to tapes.
    db2 backup database payroll tablespace (syscatspace, userspace1) to
       /dev/rmt0, /dev/rmt1 with 8 buffers without prompting
  4. The USE TSM OPTIONS keywords can be used to specify the TSM information to use for the backup operation. The following example shows how to use the USE TSM OPTIONS keywords to specify a fully qualified file name:
    db2 backup db sample use TSM options @/u/dmcinnis/myoptions.txt
    The file myoptions.txt contains the following information: -fromnode=bar -fromowner=dmcinnis
  5. Following is a sample weekly incremental backup strategy for a recoverable database. It includes a weekly full database backup operation, a daily noncumulative (delta) backup operation, and a midweek cumulative (incremental) backup operation:
       (Sun) db2 backup db sample use tsm
       (Mon) db2 backup db sample online incremental delta use tsm
       (Tue) db2 backup db sample online incremental delta use tsm
       (Wed) db2 backup db sample online incremental use tsm
       (Thu) db2 backup db sample online incremental delta use tsm
       (Fri) db2 backup db sample online incremental delta use tsm
       (Sat) db2 backup db sample online incremental use tsm
  6. In the following example, three identical target directories are specified for a backup operation on database SAMPLE. You might want to do this if the target file system is made up of multiple physical disks.
    db2 backup database sample to /dev3/backup, /dev3/backup, /dev3/backup
    The data will be concurrently backed up to the three target directories, and three backup images will be generated with extensions .001, .002, and .003.
  7. In the following example, the database WSDB is defined on all 4 database partitions, numbered 0 through 3. Database partition 0 is the catalog partition. To perform an online backup of table space USERSPACE1 on database partitions 1 and 2, with the backup image to be stored on a TSM server, issue the following command from partition 0:
    db2 BACKUP DATABASE wsdb ON DBPARTITIONNUMS (1, 2) TABLESPACE (USERSPACE1)
     ONLINE USE TSM
  8. Sample output generated to indicate the sqlcode returned by each partition.
    Example 1
    All partitions are successful (sqlcode >= 0)
    $ db2 backup db foo on all dbpartitionnums tablespace(T1)
    Part Result
    ---- ------
    0000 DB20000I The BACKUP DATABASE command completed successfully.
    0001 SQL2430W The database backup succeeded, but the following 
              table spaces do not exist on this database partition: "T1".
    
    Backup successful. The timestamp for this backup image is : 
                                                       20040908010203
    Example 2
    One or more partitions fail (sqlcode < 0)
    $ db2 backup db foo on all dbpartitionnums to /backups
    Part Result
    ---- ------
    0000 SQL2001N  The utility was interrupted. The output data may be incomplete.
    0001 SQL2419N The target disk "/backups" has become full.
    
    SQL2429N The database backup failed. The following database partitions returned errors: "1".
  9. The following backups will include the log directories in the image created:
    db2 backup db sample use snapshot
    db2 backup db sample online use snapshot
    db2 backup db sample use snapshot INCLUDE LOGS
    db2 backup db sample online use snapshot INCLUDE LOGS
  10. The following backups will NOT include the log directories in the image created:
    db2 backup db sample use snapshot EXCLUDE LOGS
    db2 backup db sample online use snapshot EXCLUDE LOGS

Usage notes