VM manager statuses

VM manager statuses

Connection failed

Connection to the VM manager failed and the data was not retrieved.

Action:

• To determine the cause of the problem, open the VM Manager Tool log file, and look for the following exception.

  VM Manager is not able to communicate with ESX 4.x due to:
  javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
  

  For more information, see: RQMCopyUtility error: SSL_TLS SSLContext not available. Certificate does not conform to algorithm constraints.

  Note: ESX 4 is no longer supported by VMware. For more information, see: End of Availability and End of Support Life for ESX 4.x and VMware Management Assistant.
• In order to debug the log in process, modify the vmman.sh or vmman.bat file. By default, the file is stored in the following location.
  • For local VM Manager Tool
    • opt/ibm/LMT/VMMAN/vmman.sh
    • C:\Program Files\ibm\LMT\VMMAN\vmman.bat
  • For central and distributed VM Manager Tool
    • /var/opt/BES/LMT/VMMAN/vmman.sh
    • C:\Program Files (x86)\BigFix Enterprise\BES Client\LMT\VMMAN\vmman.bat
  • For disconnected VM Manager Tool
    • VM Manager Tool install dir/VMMAN/vmman.sh
    • VM Manager Tool install dir\VMMAN\vmman.bat
  In the Properties Definitions section, add the debug dump option to the VMM_PROPERTIES_DEFS parameter. Insert the following line before the ####### CLASS PATH DEFINITONS ####### line:

  • VMM_PROPERTIES_DEFS="${VMM_PROPERTIES_DEFS} -Dcom.sun.xml.internal.ws.transport.http.client.HttpTransportPipe.dump=true -Dhttps.protocols=TLSv1.2,TLSv1.1,TLSv1 -Dcom.ibm.jsse2.disableSSLv3=false -Dcom.ibm.tools.attach.enable=no"
  • SET VMM_PROPERTIES_DEFS=%VMM_PROPERTIES_DEFS% -Dcom.sun.xml.internal.ws.transport.http.client.HttpTransportPipe.dump=true
  Then, run the following VM Manager Tool command.

  • vmman.sh -testconnection > vmman.out 2>&1
  • vmman.bat -testconnection > vmman.out 2>&1

  Verify the command output by checking credentials and VM manager response. If no VM manager connection is defined, the command output is empty.

Data partially collected

Data was collected only from some of the hosts.

Action:

• If the problem occurs on Hyper-V, it indicates that some of the host in the cluster have connectivity issues. To identify the problematic hosts, open the VM Manager Tool log file , and look for the following entries.

  Processing of the host: <HOST_UUID> ip: <HOST_IP_ADDRESS> from hyper-v cluster was skipped because of invalid connection status (<STATUS>).
  A communication error occurred when processing one of the Hyper-V hosts in the cluster. Host name: <HOSTNAME>. Skip and continue.

  Fix connectivity issues for the identified hosts. If the problem persists, contact IBM Support.

• If the problem occurs on Citrix Hypervisor (formerly XenServer), it indicates that XenTools are not installed on some of the virtual machines. To identify the problematic virtual machines, open the VM Manager Tool log file , and look for the following entries.

  It was not possible to retrieve the number of cores assigned to XEN VM with UUID: <VM_UUID>. Most likely the XenServer Tools are not installed on this particular VM. Skipping VM and continue.

  Install XenTools on the identified virtual machines.

Duplicated address

The address of the VM manager is duplicated. The first VM manager with this address remains active and the status is displayed for the remaining ones.

Action: Delete duplicated VM managers to ensure that data is gathered only once. The duplicated addresses might occur only within a particular VM manager type.

Hard timeout - suspended

Connection to the VM manager failed and no further attempts are made. The status indicates that connection to a VM manager failed due to high network latency or some other problems with the network.

Action:

• Check the connection between VM managers and the VM Manager Tool.
• Try increasing the time after which the connection with a VM manager is ended by changing the value of the following parameter.
  • For local and central VM Manager Tool, change the value of the vmman_connection_time_out parameter on the Advanced Server Settings panel. For more information, see: Advanced server settings.
  • For distributed and disconnected VM Manager Tool, change the value of the vmm_connection_timeout parameter in the vmmmainconf.properties file. For more information, see: VM Manager Tool configuration parameters.
• Ensure that the vmm_communication_locked property is set to false in the corresponding vmmconf_*.properties file.

Inactive

Data from the VM manager was not retrieved for a period longer than the maximum VM manager inactivity. The status indicates that either the provided URL or configuration is incorrect.

Action: Correct the URL and the credentials, and save the changes.

Invalid credentials - attempting

Connection to the VM manager failed because the credentials are incorrect or the password expired. More attempts are made until the limit of failed login attempts is exceeded. Then, the status changes to Invalid credentials - suspended to prevent the account from locking.

Action: Edit the VM manager and correct the credentials.

Invalid credentials - suspended

Connection to the VM manager is suspended because the number of failed login attempts was exceeded. The status is used to prevent the account from locking if invalid credentials were provided.

Action:

• Ensure that the VM manager credentials are correct. Then, click Resume.
• Go to vmmconf_*.properties file and make sure that the vmm_communication_locked parameter is set to false.
• Check the connection between the VM Manager Tool and the VM manager. Make sure that the firewall, proxy and NAT settings are correct.

No data (previously Insufficient rights)

No data was collected from the VM manager. The most common reason is that there is no data or that the user that is defined for this VM manager does not have sufficient rights.

Action:

• If you collected data directly from the virtualization host, ensure that the virtualization hosts from which you want to collect capacity data have at least one virtual machine that is correctly defined and running.
• Ensure that the user has read access to virtual machines that are managed by this VM manager and their host.
• If you enabled UUID-based virtual machine filtering, all VM data might be filtered out. Include more UUIDs on the list. For more information, see: UUID-based virtual machine filtering.

OK

Data is collected from the VM manager and processed according to the schedule. No issues were detected.

OK - duplicated UUIDs discarded

Each virtual machine must have a unique UUID. When a UUID identifies more than one VM, both VMs are discarded from the results.

The problem occurs most frequently on VMware and is usually caused by one of the following reasons:

• Virtual machines were deployed from catalog templates in vCloud Director. By default, such machines are assigned the same BIOS UUID. For more information, see: BIOS UUIDs in vCloud Director are not unique when virtual machines are deployed from catalog templates.
• Virtual machines were cloned without changing their UUIDs. For more information, see: Changing or keeping a UUID for a moved virtual machine.

Action: Open the VM Manager Tool log file, and identify discarded virtual machines. Then, refer to the documentation for your virtualization type to learn how to assign unique UUIDs to each virtual machine. For information about VMware, see: Editing a virtual machine with a duplicate UUID.bios.

After the duplicates are corrected, the VM manager status changes to OK.

Pending

The status is applicable only to VM managers that are managed by the local and central VM Manager Tool. It is displayed after a VM manager is created or after its definition is modified. It indicates that changes are still being propagated to the VM Manager Tool. The status changes to OK when the following steps are completed:

1. VM Manager Tool gathers data from VM managers.
2. The data is uploaded to the BigFix® server.
3. The data is transferred to License Metric Tool with a data import.

If a problem occurs during any of these steps, the status changes to indicate the problem.

Action: Wait until the VM Manager Tool completes the steps that are required to upload the data. For more information about each step, see: Flow of capacity data - central VM Manager Tool.

If the status of the VM manager remains Pending for a longer period of time for the central VM Manager Tool, it might indicate that the Schedule VM Manager Tool Scan Results Upload task was not scheduled or was stopped. To check whether it is the case, perform the following steps.

1. Log in to the BigFix console, and go to Actions.
2. Look for the Schedule VM Manager Tool Scan Results Upload action and check its status.
3. If the action does not exist, or its status is Stopped or Expired, start the action.
   1. Go to Sites > External Sites > IBM License Reporting (ILMT) v9 > Fixlets and Tasks.
   2. In the upper right pane, select Schedule VM Manager Tool Scan Results Upload, and click Take Action.
   3. Select the computer on which the BigFix server is installed, and click OK.

After you schedule the action, wait for the collected data to be uploaded to the BigFix server and then imported to License Metric Tool. The status of the VM manager should change to OK after the import.

Unknown problem

The problem does not fall into any other category. Check the VM Manager Tool log to determine the cause.

Action: If you are not able to determine the cause of the problem from the VM Manager Tool log, contact IBM Support.

Connection test statuses

The following statuses are displayed in the Connection Test Status column after you select a VM manager, and click Test Connection. The statuses are applicable only to VM managers that are managed by local or central VM Manager Tool. If the VM manager is managed in the distributed or disconnected VM Manager Tool, the connection test status is Not Applicable.

Not Tested

The connection test was never started. Select a VM manager, and click Test Connection.

Testing

The connection is being tested. It might take a few minutes until the status changes. Refresh the panel.

Successful

The connection to a VM manager was established. The VM manager is configured correctly.

Failed or Failed - <reason of failure>

The connection to a VM manager could not be established due to the provided reason (if applicable). Check the VM Manager Tool log to determine the cause.