POWER7 information

Gigabit Ethernet-SX PCI-X Adapter (FC 5700; CCIN 5700)

Learn about the specifications and LEDs for the Gigabit Ethernet-SX PCI-X Adapter.

The Gigabit Ethernet-SX PCI-X Adapter is a high-performance, highly integrated, universal, Ethernet LAN adapter for PCI-X and PCI systems. The adapter provides 1000 Mbps throughput on a standard shortwave (850 nm) 50 or 62.5 micron multimode optical cable and conforms to the IEEE 802.3z standards and supports distances of 260 meters for 62.5u MMF and 550 meters for 50.0u MMF. The adapter is designed to run in standard PCI-X V1.0a compliant systems with 32 or 64 bit PCI-X Bus Master slots at 66 or 133 MHz, and in PCI 2.2 compliant systems with 32 or 64 bit PCI bus master slots at 33 or 66 MHz. The adapter runs on 5.0 V.

The following figure shows the adapter:
Figure 1. Feature 5700
Feature 5700
1
LED
2
Multimode Fiber LC Receptacle

The LED on the Gigabit Ethernet-SX PCI-X Adapter provides information about the operation status of the adapter. The LED is visible through the mounting bracket of the adapter and, when lit, indicates the following conditions:

LED Status

Off

On (Green)

Flashing (Green)

No Link/No Activity

Link, No Activity

Link, Activity

For details about slot priorities and placement rules, see the PCI adapter placement topic collection for your system.

Gigabit Ethernet-SX PCI-X adapter specifications

Item
Description
FRU number
10N8586 (Designed to comply with RoHS requirement.)
I/O bus architecture
PCI 2.2 and PCI-X V1.0a compliant
Busmaster
Yes
Maximum number
For the maximum adapters supported, see the PCI adapter placement topic collection for your system.
Adapter size
PCI short form
Connector information
LC fiber optic
Wrap plug
LC fiber optic, part number 12R9314
Cables
Customer supplied. Optional LC-SC converter cables are available:
  • LC-SC 62.5 micron converter cable , part number 12R9322, FC 2459
  • LC-SC 50 micron use converter cable, part number 12R9321, FC 2456

Operating system or partition requirements

If you are installing a new feature, ensure that you have the software that is required to support the new feature and that you determine whether there are any prerequisites for this feature and attaching devices. To check for the prerequisites, see IBM® Prerequisite website .

The adapter is supported on the following versions of the operating systems:
  • AIX®
    • AIX Version 7.1, or later
    • AIX Version 6.1, or later
    • AIX Version 5.3, or later
  • Linux
    • Red Hat Enterprise Linux 5.6 forPOWER®, or later
    • SUSE Linux Enterprise Server 11 Service Pack 1, or later
  • IBM i
    • IBM i 7.1, or later
    • IBM i 6.1, or later


Send feedback Rate this page

Last updated: Wed, January 17, 2018