subscribe iconSubscribe to this information

Removing and replacing 7014-S25 doors

You might need to remove and replace a rack door. Use the procedures in this section to perform this task.

To remove a 7014-S25 front door, follow these steps.

  1. Unlock and open the door.
    Note: This action will release the door from the hinges.
    graphic of 7014-S25 door installation
    Figure 1. Removing the door.
  2. Grasp the door firmly with both hands and pull it away from the hinges.
Parent topic: Installing the 7014-S25 rack

Installing a 7014-S25 front door

  1. Grasp the door firmly with both hands and align the slots in the door with the hinge pins.
  2. While holding the door firmly with one hand, push each of the hinge pins down into the closed position.
Send feedback | Rate this page

Last updated: Fri, Oct 30, 2009