lstcpip command
Purpose
Displays the Virtual I/O Server TCP/IP settings and parameters.
Syntax
lstcpip [-interfaces ] [-fmt delimiter]
lstcpip [-state] [-num] [-field] [-fmt delimiter]
lstcpip [-num] [-routtable] [-routinfo] [-state] [-arp]
lstcpip [-stored]
lstcpip [-adapters]
lstcpip [-sockets] [-family {inet | inet6 | unix}]
lstcpip [-namesrv]
lstcpip [ -state [ -field FieldName ...] ] | [ -routtable [ -field FieldName ... ]] [ -fmt delimter ]
lstcpip [-hostname]
Note: If IPv6 is configured on the Virtual I/O Server,
the lstcpip command lists an IPv6 address. Due to its size,
the IPv6 address spans both the Network and Address fields of the
output screen.
Description
The lstcpip command displays the current and stored TCP/IP setting such as IP address, routing table, sockets, name server settings, and so forth.
Flags
Flag name | Description |
---|---|
-adapters | Lists Ethernet adapters on the system. |
-arp | Displays the current ARP table entries. |
-family | Specifies the INET, INET6, or UNIX socket family. |
-field | Specifies a list of fields to display. |
-fmt | Divides output by a user-specified delimiter. |
-hostname | Displays the system hostname. |
-interfaces | Displays all of the interfaces configured on the system. Specifically, it displays their addresses, network masks, states, and mac addresses. |
-namesrv | Lists DNS name servers in search order and domain name. |
-num | Displays numeric output, rather than trying to resolve host names. |
-routtable | Displays the routing tables. |
-routinfo | Displays the routing tables, including the user-configured and current costs of each route. |
-sockets | Displays information about currently open sockets. |
-state | Displays the current state of all configured interfaces. |
-stored | Displays stored TCP/IP configuration, which will be applied when the system starts. It will list interface IP addresses, any defined static routes, host names, and DNS info. |
Examples
- To list the Virtual I/O Server TCP/IP
configuration, type:
lstcpip -stored
- To list the current routing table, type:
lstcpip -routtable
- To list open inet sockets, type:
lstcpip -sockets -family inet
- To display the state of all interfaces using
a delimiter, type:
This command produces output similar to the following:lstcpip -state -fmt “/”
sit0/1480/link#2/9.3.126.60/0/0/0/0/0 sit0/1480/commo126060./austin.ixx.com/0/0/0/0/0 en2/1500/link#3/0.9.6b.6e.e3.72/871825/0/16305/1/0 en2/1500/9.3.126/commo126060.austi/871825/0/16305/1/0 en2/1500/fe80::209:6bff:fe6e:e372/871825/0/16305/1/0 lo0/16896/link#1/5013/0/5019/0/0 lo0/16896/127/localhost/5013/0/5019/0/0 lo0/16896/::1/5013/0/5019/0/0
- To display all interface information, type:
This command produces output similar to the following:lstcpip -interfaces
Name Address mask/Pfx State MAC en2 fe80::209:6bff:fe6e:e372 64 up 00:09:6b:6e:e3:72 en3 - - down 00:09:6b:6e:e3:73 et2 - - down 00:09:6b:6e:e3:72 et3 - - down 00:09:6b:6e:e3:73 en4 - - down 0e:f0:c0:00:30:04