fcstat command
Purpose
Displays statistics of the virtual adapter gathered by the specified Fibre Channel device driver.
Description
The fcstat command
displays the statistics of the virtual adapter gathered by the specified
Fibre Channel device driver. It collects the statistics using the
following process:
- Opens the message catalog of fcstat and checks the parameter list.
- Accesses the Object Data Manager (ODM) database for information that relates to the selected virtual adapter.
- Accesses the ODM database for information that relates to ports of the selected virtual adapter.
- Opens and accesses the statistics of the virtual adapter.
- Reports statistics and exits program.
Flags
Flag name | Description |
---|---|
-client | Displays the statistics of the virtual adapter per client. |
-d | Displays the statistics by opening the adapter in diagnostic mode. |
device_name | The name of the Fibre Channel device, for example, fcs0. |
-e | Displays all the statistics, which include the device-specific statistics. |
-n wwpn device_name | Displays the statistics on a virtual port level that is specified by the worldwide port number (WWPN) of the virtual adapter. |
-z | Resets some of the statistics to their initial values. Only privileged users can issue this flag. |
Exit Status
The following exit values are returned:
Value | Description |
---|---|
0 | Successful completion. |
>0 | An error occurred. |
Examples
- To display the statistics for Fibre Channel device driver fcs0,
type the following command:
fcstat fcs0
Note: The output format of various AIX® commands is not always static. Do not write programs with the expectation that the output for the fcstat command remains as follows.The system displays the output as follows:
FIBRE CHANNEL STATISTICS REPORT: fcs0 Device Type: FC Adapter (df1000f9) Serial Number: 1E313BB001 Option ROM Version: 02C82115 Firmware Version: B1F2.10A5 Node WWN: 20000000C9487B04 Port WWN: 10000000C9416DA4 FC4 Types Supported: 0x0000010000000000000000000000000000000000000000000000000000000000 Active: 0x0000010000000000000000000000000000000000000000000000000000000000 Class of Service: 4 Port FC ID: 011400 Port Speed (supported): 2 GBIT Port Speed (running): 1 GBIT Port Type: Fabric Seconds Since Last Reset: 345422 Transmit Statistics Receive Statistics ------------------- ------------------ Frames: 1 Frames: 1 Words: 1 Words: 1 LIP Count: 1 NOS Count: 1 Error Frames: 1 Dumped Frames: 1 Link Failure Count: 1 Loss of Sync Count: 1 Loss of Signal: 1 Primitive Seq Protocol Err Count: 1 Invalid Tx Word Count: 1 Invalid CRC Count: 1 IP over FC Adapter Driver Information No DMA Resource Count: 0 No Adapter Elements Count: 0 FC SCSI Adapter Driver Information No DMA Resource Count: 0 No Adapter Elements Count: 0 No Command Resource Count: 0 IP over FC Traffic Statistics Input Requests: 0 Output Requests: 0 Control Requests: 0 Input Bytes: 0 Output Bytes: 0 FC SCSI Traffic Statistics Input Requests: 16289 Output Requests: 48930 Control Requests: 11791 Input Bytes: 128349517 Output Bytes: 209883136
- To display the statistics on a virtual port level specified by
the WWPN of the virtual adapter, type the following command:
fcstat -n C050760547E90000 fcs0
The system displays the output as follows:
FIBRE CHANNEL STATISTICS REPORT: fcs0 Device Type: 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03) (adapter/pciex/df1000f114108a0) Serial Number: 1B03205232 Option ROM Version: 02781135 ZA: U2D1.10X5 World Wide Node Name: 0xC050760547E90000 World Wide Port Name: 0xC050760547E90000 FC4 Types Supported: 0x0000012000000000000000000000000000000000000000000000000000000000 Active: 0x0000010000000000000000000000000000000000000000000000000000000000 Class of Service: 3 Port Speed (supported): 8 GBIT Port Speed (running): 8 GBIT Port FC ID: 0x010f00 Port Type: Fabric Seconds Since Last Reset: 431494 Transmit Statistics Receive Statistics ------------------- ------------------ Frames: 2145085 Frames: 1702630 Words: 758610432 Words: 187172864 LIP Count: 0 NOS Count: 0 Error Frames: 0 Dumped Frames: 0 Link Failure Count: 0 Loss of Sync Count: 0 Loss of Signal: 0 Primitive Seq Protocol Error Count: 0 Invalid Tx Word Count: 61 Invalid CRC Count: 0 IP over FC Adapter Driver Information No DMA Resource Count: 0 No Adapter Elements Count: 0 FC SCSI Adapter Driver Information No DMA Resource Count: 0 No Adapter Elements Count: 0 No Command Resource Count: 0 IP over FC Traffic Statistics Input Requests: 0 Output Requests: 0 Control Requests: 0 Input Bytes: 0 Output Bytes: 0 FC SCSI Traffic Statistics Input Requests: 336 Output Requests: 6797 Control Requests: 5 Input Bytes: 5689607 Output Bytes: 30281728
- To display the statistics of the virtual adapter per client, type
the following command:
fcstat -client
Note: The output format of various AIX commands is not always static. Do not write programs with the expectation that the output for the fcstat command remains as follows.The system displays the output as follows:
hostname dev wwpn inreqs outreqs ctrlreqs inbytes outbytes DMA_errs Elem_errs Comm_errs hina9v02 fcs0 0x10000000C995AECF 52648 30 528456 19695654 600 0 0 0 hina901 fcs1 0xC05076029C360000 2592 9 523264 3780212 180 0 0 0 hina902 fcs1 0xC05076029C360008 2136 4 428 4362876 80 0 0 0 hina903 fcs1 0xC05076029C360010 2721 17 1348 21768 340 0 0 0 hina904 fcs2 0xC05076029C360018 0 0 0 0 0 0 0 0 hina905 fcs2 0xC05076029C360020 0 0 0 0 0 0 0 0 hina908 fcs2 0xC05076029C360038 0 0 0 0 0 0 0 0 hina9v02 fcs3 0x10000000C9978277 23109 40 852078 27628067 800 0 0 0 hina901 fcs1 0xC05076029C360004 3954 17 844919 14264972 340 0 0 0 hina902 fcs1 0xC05076029C36000C 2934 4 450 9906124 80 0 0 0 hina903 fcs1 0xC05076029C360014 2752 19 1379 22016 380 0 0 0 hina904 fcs1 0xC05076029C36001C 0 0 0 0 0 0 0 0 hina905 fcs1 0xC05076029C360024 0 0 0 0 0 0 0 0 hina908 fcs0 0xC05076029C36003C 0 0 0 0 0 0 0 0