IBM Support

Release of QRadar 7.2.8 Patch 11 (7.2.8.20171213225424)

Release notes


Abstract

A list of the installation instructions and resolved issues list for the release of IBM Security QRadar 7.2.8 Patch 11 (7.2.8.20171213225424).

Content

Important Administrator Notes


QRadar 7.2.8 Patch 10 and later resolves an additional security bulletin that was added on December 4th, 2017.

Before installing this update, there are several important changes that administrators should be aware of if they did not install a previous QRadar release (7.2.8 Patch 7, Patch 8, or Patch 9). This message was included in the 7.2.8 Patch 10 release notes for visibility:

  • TLSv1 is disabled in QRadar 7.2.8 Patch 7 and later. This change was originally completed in QRadar 7.3.0 and has been ported to the QRadar 7.2.8 software stream as of 7.2.8 Patch 7. This means that Tomcat will no longer listen and actively refuse browser connections using TLSv1.0 or TLSv1.1 after the administrator updates to QRadar 7.2.8 Patch 10. Browsers will be required to use TLSv1.2 to authenticate to QRadar SIEM. This should only impact users with older or legacy browsers.
  • The installation of QRadar 7.2.8 Patch 10 and later updates the Java version to Java 8. This change was released as part of 7.2.8 Patch 7, but is also being noted for administrators in the release notes for 7.2.8 Patch 10 to ensure this change is communicated.
  • The Master Console v0.10.0 or v0.11.0 is not supported on QRadar 7.2.8 Patch 7 and later, including 7.2.8 Patch 10 due to changes made with Java 8 and TLSv1.0 connections as described above. Administrators who require the Master Console should not upgrade to a version above QRadar 7.2.8 Patch 6.
  • Administrators with managed WinCollect agents at version 7.2.3 or earlier can be impacted by disabled ciphers in QRadar 7.2.8 Patch 7 and later. It is recommended that administrators with managed WinCollect agents upgrade to the latest WinCollect agent version. Administrators who have upgraded to WinCollect 7.2.4 or later are not impacted by this issue and administrators with Stand-alone WinCollect agents are also not impacted.

Upgrade information


Fix packs are cumulative software updates to fix known software issues in your QRadar deployment. QRadar fix packs are installed by using an SFS file. The fix pack can update all appliances attached to the QRadar Console. If your deployment is installed with any of the following QRadar versions, you can install fix pack 7.2.8-QRADAR-QRSIEM-20171213225424 to upgrade to QRadar 7.2.8 Patch 11:

Current QRadar Version Upgrades to QRadar 7.2.8 Patch 10?
QRadar 7.2.3 (any patch level) or earlier No, a minimum of QRadar 7.2.4 is required.
QRadar 7.2.4 (any patch level) Yes
QRadar 7.2.5 (any patch level) Yes
QRadar 7.2.6 (any patch level) Yes
QRadar 7.2.7 (any patch level) Yes
QRadar 7.2.8 (any patch level) Yes

The 7.2.8-QRADAR-QRSIEM-20171213225424 fix pack can upgrade QRadar 7.2.4 (7.2.4.983526) and later to the latest software version. However, this document does not cover all of the installation messages and requirements, such as changes to memory requirements or browser requirements for QRadar. To review any additional requirements, see the QRadar Upgrade Guide. If you are on a version of QRadar earlier than QRadar 7.2.4, you must upgrade to QRadar 7.2.4 before proceeding to QRadar 7.2.8.

Important: A QRadar 7.2.8 ISO is available on IBM Fix Central for administrators to want to install a new appliance or virtual machine. Administrators who want to complete a new install need to review the QRadar Installation Guide.



Before you begin


Ensure that you take the following precautions:
  • To avoid access errors in your log file, close all open QRadar sessions.
  • The fix pack for QRadar cannot be installed on a managed host that is at a different software version from the Console. All appliances in the deployment must be at the same software revision to patch the entire deployment.
  • Verify that all changes are deployed on your appliances. The patch cannot install on appliances that have changes that are not deployed.
  • The .SFS file is only capable of upgrading existing QRadar installations. A QRadar 7.2.8 ISO is available for administrators to want to install a new appliance or virtual machine. Administrators who want to do a new install need to review the QRadar Installation Guide.


Installing the QRadar 7.2.8 Patch 11 Fix Pack


The instructions guide administrators through the process of upgrading an existing QRadar version at 7.2.4 or higher to the newest software version. If the administrator is interested in updating appliances in parallel, see: QRadar: How to Update Appliances in Parallel.

Procedure
This release of QRadar 7.2.8 Patch 11 supersedes all other QRadar 7.2.8 builds.

  1. Download the fix pack to install QRadar 7.2.8 Patch 11 from the IBM Fix Central website: http://www.ibm.com/support/fixcentral/swg/quickorder?parent=IBM%20Security&product=ibm/Other+software/IBM+Security+QRadar+SIEM&release=7.2.0&platform=Linux&function=fixId&fixids=7.2.8-QRADAR-QRSIEM-20171213225424&includeRequisites=1&includeSupersedes=0&downloadMethod=http&source=fc
  2. Using SSH, log in to your system as the root user.
  3. Copy the fix pack to the /tmp directory on the QRadar Console. Note: If space in the /tmp directory is limited, copy the fix pack to another location that has sufficient space.
  4. To create the /media/updates directory, type the following command: mkdir -p /media/updates
  5. Change to the directory where you copied the patch file. For example, cd /tmp
  6. To mount the patch file to the /media/updates directory, type the following command:
    mount -o loop -t squashfs 728_QRadar_patchupdate-7.2.8.20171213225424.sfs /media/updates
  7. To run the patch installer, type the following command: /media/updates/installer
    Note: The first time that you run the fix pack, there might be a delay before the fix pack installation menu is displayed.
  8. Using the patch installer, select all.
  • The all option updates the software on all appliances in the following order:


    1. Console
    2. No order required for remaining appliances. All remaining appliances can be updated in any order the administrator requires.

  • If you do not select the all option, you must select your Console appliance.

    As of QRadar 7.2.6 Patch 4 and later, administrators are only provided the option to update all or update the Console appliance. Managed hosts are not displayed in the installation menu to ensure that the Console is patched first. After the Console is patched, a list of managed hosts that can be updated is displayed in the installation menu. This change was made starting with QRadar 7.2.6 Patch 4 to ensure that the Console appliance is always updated before managed hosts to prevent upgrade issues.

    If administrators want to patch systems in series, they can update the Console first, then copy the patch to all other appliances and run the patch installer individually on each managed host. The Console must be patched before you can run the installer on managed hosts. When updating in parallel, there is no order required in how you update appliances after the Console is updated.

    If your Secure Shell (SSH) session is disconnected while the upgrade is in progress, the upgrade continues. When you reopen your SSH session and rerun the installer, the patch installation resumes.



After the update completes


  1. After the patch completes and you have exited the installer, type the following command: umount /media/updates
  2. Administrators and users should clear their browser cache before logging in to the Console.

    Results
    A summary of the fix pack installation advises you of any managed host that were not updated. If the fix pack fails to update a managed host, you can copy the fix pack to the host and run the installation locally. After all hosts are updated, administrators can send an email to their team to inform them that they will need to clear their browser cache before logging in to the QRadar SIEM interface.



Resolved issues


Legend: **
characters are displayed next to an APAR indicate that this issue was discovered in another software version, such as QRadar 7.3.0 and a fix was created to resolve this issue in 7.2.8 Patch 10. Some APAR links in the table below might take 24 hours to display properly after a software release.

Issues resolved in QRadar 7.2.8 Patch 11
Product Component Number Description
QRADAR LOG SOURCES IV99511** LOG SOURCE GROUP WINDOW CAN SOMETIMES FAIL TO LOAD WHEN GREATER THAN 1000 LOG SOURCES EXIST IN A GROUP
QRADAR VULNERABILITY MANAGER SCAN POLICY IV98930 'FAILED TO LOAD DATA' MESSAGE WHEN TRYING TO ADD NEW VULNERABILITIES INTO A PATCH SCAN POLICY
QRADAR DASHBOARDS IV98873** THE MESSAGE 'THERE WAS AN ERROR DOWNLOADING THIS ITEM' CAN SOMETIMES BE DISPLAYED IN A DASHBOARD WIDGET
QRADAR APPLICATIONS IV98744 HOSTCONTEXT OUT OF MEMORY INSTANCES CAN SOMETIMES OCCUR DURING BACKUP OF QRADAR APPS
QRADAR LOG SOURCES IV98493 BULK ADD/EDIT OF MORE THAN 100 LOG SOURCES CAN FAIL
QRADAR LOG SOURCES IV98436 UNABLE TO PERFORM A BULK ADD OF LOG SOURCES
QRADAR API IV98260 COMMA'S ARE TREATED AS "OR" IN QUICK FILTER SEARCHES CAUSING VARIED SEARCH RESULTS
QRADAR SEARCHES IV98190 'FAILED TO LOAD DATA' MESSAGE WHEN TRYING TO ADD NEW VULNERABILITIES INTO A PATCH SCAN POLICY
QRADAR SEARCHES IV98100 ADDING A REGEX FILTER TO A SEARCH CAN GENERATE ERROR 'FATAL EXCEPTION IN VALIDATIONEXCEPTION: THIS IS NOT A VALID...'
QRADAR LOG SOURCE EXTENSIONS IV97847 LOG SOURCE EXTENSIONS CAN EXPERIENCE SINGLE-DIGIT DATE PARSING ISSUES
QRADAR VULNERABILITY MANAGER VULNERABILITY ASSIGNMENT IV97523 UNABLE TO ADD NEW CIDR RANGES IN VULNERABILITY ASSIGNMENT SCREEN
QRADAR SEARCHES IV97151** 'THE SERVER ENCOUNTERED AN ERROR READING ONE OR MORE FILES' WHEN PERFORMING A LOG ACTIVITY SEARCH
QRADAR DOCKER IV95751** 'THE SERVER ENCOUNTERED AN ERROR READING ONE OR MORE FILES' WHEN PERFORMING A LOG ACTIVITY SEARCH
QRADAR REPORTS IV95248** 'THE SERVER ENCOUNTERED AN ERROR READING ONE OR MORE FILES' WHEN PERFORMING A LOG ACTIVITY SEARCH
QRADAR PATCH IV93699 PATCH TO 7.2 MR1 HANGS ON REBOOT IF A NEW SESSION IS OPENED PRIOR TO REBOOTING
QRADAR OFFENSES IV91301** 'OFFENSE SEARCH EXCLUSION FILTERS CONTAINING A DEFINED NETWORK HIERARCHY PARAMETER DO NOT RESPECT THE EXCLUSION
QRADAR CUSTOM RULES ENGINE IV85841 QRADAR SYSTEM DEGRADATION AND/OR DROPPED EVENTS CAN CAUSED BY SOME VULNERABILITY CRE TESTS
QRADAR RISK MANAGER GRAPHS IV87193 THE QRM 'DOWNLOAD IMAGE' BUTTON GENERATES ERROR 'THE GRAPH WAS TOO LARGE TO DOWNLOAD.' INCORRECTLY
QRADAR DEPLOYMENT ACTIONS IV78428 ADDING OR RE-ADDING A QRADAR MANAGED HOST CAN SOMETIMES FAIL
QRADAR VULNERABILITY MANAGER VULNERABILITIES IJ02090** NEWLY CONFIGURED VULNERABILITY EXCEPTIONS CAN SOMETIMES BE DUPLICATED
QRADAR USER ROLES IJ01112 NON ADMIN USERS WITH LIMITED USER ROLES MAY NOT BE ABLE TO FILTER BY CATAGTORIES
QRADAR CUSTOM EVENT PROPERTIES IJ00489 COMMAS ARE SWITCHED TO 'OR' WHEN MULTIPLE CUSTOM EVENT PROPERTIES ARE CONTAINED IN A SEARCH
QRADAR USER INTERFACE IJ00416 LOG AND NETWORK ACTIVITY EXPORTS TO CSV DISPLAY INCORRECT COLUMN NAMES
QRADAR AQL IJ00327 AQL SEARCH WITH 'REFERENCESETCONTAINS' CAN FILL QRADAR LOGS WITH "THE USERSESSION OBJECT IN SESSIONCONTEXT IS NULL...
QRADAR DATA NODES IJ00141** DISK MAINTENANCE DELETES /STORE/ARIEL/FLOWS (RECORDS AND PAYLOADS) DIRECTORY ON DATANODES THAT RECEIVE EVENTS ONLY
QRADAR REPORTS IJ00069** 'ERROR GENERATING SQL CHART' WHEN RUNNING A REPORT WITH "TIME" SET AS THE HORIZONTAL X-AXIS
QRADAR AQL IJ00066 TABLE REPORTS USING ACCUMULATED AQL DATA DISPLAY INCORRECT COLUMNS
QRADAR VULNERABILITY MANAGER SCANNERS IJ00034 VULNERABILITY DMZ EXTERNAL SCAN USING AUTHENTICATED PROXY OPTIONS DOES NOT WORK AS EXPECTED

Issues resolved in QRadar 7.2.8 Patch 10
Product Component Number Description
QRADAR SECURITY BULLETIN CVE-2015-6420 APACHE COMMONS COLLECTION AS USED IN IBM QRADAR SIEM IS VULNERABLE TO REMOTE CODE EXECUTION.
QRADAR CUSTOM ACTION SCRIPTS IJ01043** THE QRADAR USER INTERFACE CAN BECOME UNRESPONSIVE WHEN LOADING THE LOG SOURCES WINDOW DUE TO A SENSORDEVICE TABLE LOCK
QRADAR CUSTOM ACTION SCRIPTS IV86075** A CUSTOM ACTION SCRIPT USING THE PARAMETER 'CREEVENTLIST' CAN FAIL AND GENERATE AN EXCEPTION IN QRADAR LOGGING
QRADAR CUSTOM ACTION SCRIPTS IV86611 CUSTOM ACTION RESPONSE RETURNS 'NULL' VALUE FOR SOME DEFINED PARAMETERS
QRADAR ASSETS IV89590** THE 'ASSET NAME' FIELD FOR ASSETS CAN SOMETIMES BE BLANK
QRADAR UPGRADES IV91296 PATCHING TO QRADAR VERSION 7.2.7.+ CAN FAIL IF THE CONSOLE DATABASE HAD PREVIOUSLY BEEN MANUALLY RESTORED
QRADAR INCIDENT FORENSICS NOTIFICATIONS IV91662 QRADAR SYSTEM NOTIFICATIONS SIMILAR TO '...FORENSICSNODE. FORENSICSNODE123 HAS FAILED TO START FOR XXXXX INTERVALS...'
QRADAR OFFENSES IV93254 'DEVICE STOPPED SENDING EVENTS' RULE SOMETIMES DOES NOT DISPLAY THE ASSOCIATED LOG SOURCE WHEN PART OF AN OFFENSE
QRADAR DASHBOARD IV93409 NEW QRADAR USERS THAT ARE CREATED BY LDAP AUTHENTICATION DO NOT HAVE ANY DEFAULT DASHBOARDS
QRADAR DSM EDITOR IV93696 DSM EDITOR CAN DISPLAY REGEX GRABS INCONSISTENTLY BETWEEN WORKSPACE FIELD AND LOG ACTIVITY PREVIEW
QRADAR ASSET DETAILS IV93867** THE ASSET DETAILS, ASSET SUMMARY WINDOW OF AN ASSET CAN SOMETIMES BE MISSING THE 'OPERATING SYSTEM' DATA
QRADAR OFFENSE/DSM EDITOR IV94165 EVENTS CONTRIBUTING TO AN OFFENSE CANNOT BE DISPLAYED AFTER CUSTOM EVENT PROPERTY 'OFFENSEID' IS CREATED IN DSM EDITOR
QRADAR FLOWS IV94791 FLOWSOURCE_ALIAS TABLE IS NOT REPLICATED FROM CONSOLE TO MANAGED HOSTS
QRADAR DSM EDITOR IV95514 SELECTED EVENT DOES NOT DISPLAY IN THE DSM EDITOR WORKSPACE
QRADAR SEARCHES IV96161 SEARCHES CAN FAIL WITH 'CONNECTING TO THE QUERY SERVER' ERRORS OR 'I/O ERROR OCCURRED' WHEN A LARGE NUMBER OF SECURITY PROFILES EXIST
QRADAR SERVICES IV96190** HOSTCONTEXT CAN RUN OUT OF MEMORY DUE TO TASK MANAGEMENT DATABASE TABLE BECOMING CORRUPTED
QRADAR DISK SPACE IV96323 THE /STORE/TRANSIENT PARTITION DOES NOT PERFORM REQUIRED CLEANUP WHEN RUNNING LOW ON FREE DISK SPACE
QRADAR DISK SPACE IV96357 /VAR/LOG/ PARTITION CAN RUN OUT OF SPACE DUE TO LOGS FILLING WITH MESSAGES 'THE USERSESSION OBJECT IN SESSIONCONTEXT...'
QRADAR VULN MANAGER SEARCHES IV96411 SEARCHES FOR VULNERABILITY BY INSTANCE CAN DISPLAY A COUNT, BUT NO DATA
QRADAR MASTER CONSOLE IV96863 VIEWING OFFENSES IN MASTER CONSOLE CAN GENERATE THE ERROR 'ERROR 12: ENDPOINT INVOCATION RETURNED AN UNEXPECTED ERROR'
QRADAR SEARCHES IV97167 SEARCHES CAN FAIL/CANCEL WHEN A MAXIMUM NUMBER OF RESULTS IS REACHED
QRADAR USER INTERFACE IV97182 "MANAGE SEARCH RESULTS" PAGE FAILS TO LOAD WITH A 'GENERAL FAILURE. PLEASE TRY AGAIN' ERROR MESSAGE
QRADAR FLOW DATA IV97276 THE QFLOW PROCESS CAN SOMETIMES STOP PROCESSING WHEN OVERFLOW CONDITIONS ARE EXPERIENCED
QRADAR BACKUP / RESTORE IV97342 QRADAR BACKUPS CAN TIMEOUT WHEN APPS ARE INSTALLED
QRADAR LICENSE IV97521 UNABLE TO ALLOCATE LICENSE TO A 3129 CONSOLE APPLIANCE
QRADAR REPORTS IV97575 A VULNERABILITY REPORT'S VULNERABILITY COUNT VALUE CAN VARY WITHIN DIFFERENT SECTIONS OF THE SAME REPORT
QRADAR DEPLOYMENT IV97835 TUNNEL CONNECTIONS REMAIN AFTER A DATA NODE OR EVENT COLLECTOR ARE REMOVED FROM A QRADAR DEPLOYMENT
QRADAR FLOW DATA IV97942 AUTO UPDATE CAN CAUSE AN INTERRUPTION IN FLOW COLLECTION AND A "PERFORMANCE DEGRADATION" SYSTEM NOTIFICATION IN THE USER INTERFACE
QRADAR SEARCHES IV98068 IN PROGRESS SEARCHES THAT RUN LONGER THAN THE CONFIGURED SEARCH RESULTS RETENTION PERIOD ARE DELETED PRIOR TO COMPLETION
QRADAR DATA OBFUSCATION IV98095 ATTEMPTING TO OBFUSCATE A LARGE VOLUME OF USERNAME FIELD BASED EVENTS CAN CAUSE OBFUSCATED EVENTS TO BE DROPPED
QRADAR VULN MANAGER SCANNING IV98207 QVM SCAN RESULT DISPLAYS 100% PROGRESS AND STOPPED AS SCAN DURATION TIME CONTINUES TO INCREMENT
QRADAR USER MANAGEMENT IV98259 THE USER MANAGEMENT > AUTHENTICATION WINDOW CAN DISPLAY 'KEY NOT FOUND: JSP.QRADAR...' MESSAGES IN THE USER INTERFACE
QRADAR API IV98260 API SEARCHES RETRIEVING A COMPLETED SEARCH FROM THE /ARIEL/SEARCHES ENDPOINT CAN SOMETIMES RETURN A 500 ERROR CODE
QRADAR OPERATING SYSTEM IV98442 QRADAR 7.2.8 REPLACES REDHAT'S GRUB WITH GRUB 2
QRADAR APPLICATION FRAMEWORK IV98486 QRADAR APPLICAION DATA CAN APPEAR TO BE MISSING AFTER APPLYING A QRADAR PATCH
QRADAR UPGRADES IV98518 QRADAR PATCHING TO 7.2.8P7, P8 or P9 FAILS IF THE SYSTEM WAS BUILT USING QRADAR ISO VERSION 7.1.0.380596 AND HAS QRM
QRADAR VULN MANAGER REPORTS IV98524 EMAILED VULNERABILITY SCAN REPORTS CAN SOMETIMES BE BLANK
QRADAR INCIDENT FORENSICS REPORTS IV98529 QNI ONLY GENERATES FILE INFORMATION FOR THE LAST FILE CONTAINED WITHIN A SINGLE EMAIL, NOT ALL FILES
QRADAR SEARCH PERFORMANCE IV98539 ARIEL SEARCHES THAT DO MANY STRING COMPARISONS CAN RUN SLOWER THAN EXPECTED IN LOW MEMORY SCENARIOS
QRADAR QFLOW SERVICES IV98542 QFLOW COLLECTORS CAN EXPERIENCE REPETITIVE PROCESS FAILURES TO START, AND CORE DUMPS THAT CAN LEAD TO FILE SPACE ISSUES
QRADAR VULN MANAGER ASSET DATA IV98728 SCAN RESULT DATA CAN SOMETIMES FAIL TO UPDATE THE QRADAR ASSET MODEL
QRADAR LOG MANAGER RULES IV98928 ADDITIONAL RULE TESTS CANNOT BE ADDED TO CURRENT RULES AND NEW RULES CANNOT BE CREATED WHEN USING QRADAR LOG MANAGER
QRADAR QUICK SEARCH INDEXES IV99204 LUCENE INDEX DIRECTORIES DO NOT HONOR THE 'PAYLOAD INDEX RETENTION' CONFIGURED IN THE SYSTEM SETTINGS
QRADAR UPGRADES IV99289 QRADAR MEMORY CHECK PRETEST ON AN XX48 CAN FAIL WITH A RAM REQUIREMENT ERROR '...WE NEED AT LEAST 256G OF RAM...'
QRADAR VULN MANAGER SCAN RESULTS IV99333 INCONSISTENT ASSET COUNTS WHEN DRILLING DOWN INTO SOME SCAN RESULTS
QRADAR UPGRADES IV99559 QRADAR UPGRADE FROM 7.2.8 P6 TO 7.3.0 GA CAN FAIL AT TOMCAT NOT STARTING

Issues resolved in QRadar 7.2.8 Patch 9
Product Component Number Description
QRADAR USER INTERFACE IV98386 LOG SOURCE USER INTERFACE EDITS DO NOT SAVE ENABLED, COALESCING EVENTS, STORE EVENT PAYLOAD, AND GROUP ASSIGNMENT CHECK BOX ACTIONS


Issues resolved in QRadar 7.2.8 Patch 8
Product Component Number Description
VULNERABILITY MANAGER INTERFACE IV92973** A SCHEDULED SCAN IN QRADAR VULNERABILITY MANAGER CAN BE STARTED MULTIPLE TIMES ONE MINUTE APART
QRADAR SEARCH IV93076 RESULTS IN REPORT DATA CAN SOMETIMES NOT MATCH SEARCH RESULTS WHEN AN 'OR' CONDITION EXISTS IN SEARCH FILTERS
QRADAR DATA NODE IV93697** DATA NODES MAY NOT REBALANCE CORRECTLY IF THERE ARE MULTIPLE DESTINATIONS
FORENSICS DEPLOY IV94790** FORENSICS RECOVERY JOBS CAN BECOME ORPHANED IF INTERRUPTED BY A 'DEPLOY FULL CONFIGURATION'
QRADAR SEARCH IV89672** LDAP HOVER TEXT TOOLTIP DISPLAYS DUPLICATE VALUES
FORENSICS RECOVERY IV95243 FORENSICS RECOVERY PROCESS COMPLETES SUCCESSFULLY BUT THE DOCUMENT COUNT REPORTS AS 0
QRADAR SERVICES IV95495 PROCESSES (TOMCAT, HOSTCONTEXT, ECS) CAN CRASH DUE TO 'TOO MANY OPEN FILES'
QRADAR HISTORICAL CORRELATION IV96193 LOWER THAN EXPECTED PERFORMANCE RESULTS WHEN USING HISTORICAL CORRELATION
QRADAR ERROR MESSAGES IV96357 /VAR/LOG/ PARTITION CAN RUN OUT OF SPACE DUE TO LOGS FILLING WITH MESSAGES 'THE USERSESSION OBJECT IN SESSIONCONTEXT...'
VULNERABILITY MANAGER REPORTING IV96372 INCOMPLETE VULNERABILITY REPORT CAN BE GENERATED WHEN RUNNING AGAINST ASSETS CONTAINED IN THE SAME CIDR
QRADAR REPORTING IV96377 REPORTS RUN ON SOME AQL SEARCHES CAN RETURN INCONSISTENT COLUMN NAMES
QRADAR SEARCH IV96423 ERROR MESSAGE: 'GENERAL FAILURE. PLEASE TRY AGAIN' WHEN A LOG ACTIVITY SEARCH WITH A REFERENCE TABLE FILTER 'USER SPECIFIED VALUE' IS RUN
QRADAR BACKUP IV97342 QRADAR SCHEDULED BACKUPS CAN TIMEOUT WHEN APPS ARE INSTALLED
QRADAR UPDATE/UPGRADE IV97500 QRADAR PATCHING CAN FAIL WITH REFERENCE TO 'PACKAGE ADMINCONSOLE-7.X.X.-XXXXXXX' WRITTEN IN PATCHES.LOG
QRADAR DEPLOY IV97445 'DEPLOY FULL CONFIGURATION' REQUIRED PRIOR TO NEW USERS BEING ABLE TO LOGIN TO THE QRADAR UI WHEN USING LDAP GROUP AUTH
QRADAR USER INTERFACE IV97837 ADMIN TAB "SYSTEM HEALTH" ICON NO LONGER PRESENT AFTER APPLYING QRADAR PATCH 7.2.8 PATCH 7
QRADAR APPLICATIONS IV98086 APPS WITH LONG INSTALLATION TIMES MIGHT APPEAR WITH A STATUS 'FAILED TO INSTALL' IN THE USER INTERFACE

Issues resolved in 7.2.8 Patch 7
Number Description
SECURITY BULLETIN IBM JAVA AS USED IN IBM QRADAR SIEM IS VULNERABLE TO MULTIPLE CVES
IV84643 USERNAMES CONTAINING A ' . ' ARE TRUNCATED IN USER LOGINSIM AUDIT-2 EVENTS
IV86288 SOME QRADAR SERVICES CAN FAIL TO START AFTER A 'DEPLOY FULL CONFIGURATION' IS PERFORMED
IV87510 REALTIME STREAMING CAN FAIL TO DISPLAY EVENTS WHEN FILTERING ON EVENTPROCESSOR
IV90889 DASHBOARD ITEM CAN SOMETIMES DISPLAY NO DATA IN SOME INSTANCES OF NETWORK HIERARCHY CONTAINING DOUBLE BYTE CHARACTERS
IV93256 QRADAR RISK MANAGER PATH SEARCH CAN FAIL TO COMPLETE WHEN A SOURCEFIRE IPS EXISTS IN THE TOPOLOGY
IV93607 QRADAR HOSTS RUNNING ON AMAZON WEB SERVICES (AWS) CAN FAIL TO UPGRADE TO QRADAR 7.2.8 DUE TO A MISSING DEPENDENCY
IV93948 'GENERAL FAILURE' ERROR WHEN PERFORMING SEARCHES AGAINST NUMERIC REFERENCE SET DATA
IV94508 POSTGRES DEADLOCKS CAN SOMETIMES LEAD TO SEARCH DATA RESULT INCONSISTENCY
IV94511 CONTENT PACK INSTALLATION CONTAINING SENSORPROTOCOLS CAN FAIL IF THE ID IS ALREADY IN THE SENSORPROTOCOL TABLE
IV94782 QRADAR LOGGING REPORTS HOSTCONTEXT '...TOO MANY OPEN FILES' MESSAGES
IV94873 FLOW COLLECTOR APPLIANCES (12XX/13XX) WITH MULTI-THREADING ENABLED CAN STOP COLLECTING FLOWS AFTER PATCHING
IV95105 REPORTS CREATED FROM VULNERABILITY SCAN PROFILES CAN SOMETIMES BE BLANK
IV95106 REPORT DATA CAN DIFFER FROM SEARCH DATA DUE TO ACCUMULATOR ROLLUP FAILURE
IV95109 DSM EDITOR PREVIEW FUNCTION DOES NOT DISPLAY WHEN USING JAPANESE LOCALE
IV95242 PERFORMING A 'PATCH ALL' CAN DISPLAY MESSAGE 'THE FOLLOWING MANAGED HOSTS ARE NOT ACCESSIBLE VIA SSH...'
IV96155 NETWORK ACTIVITY EXPORT CAN FAIL WTIH ERROR 'THERE WAS A PROBLEM COMPLETING YOUR REPORT. PLEASE TRY AGAIN LATER.'
IV96294 QRADAR NETWORK INSIGHT APPLIANCE NETWORK INTERFACE(S) CAN FAIL TO START/LOAD

Issues resolved in 7.2.8 Patch 6
Number Description
IV94880 CONTENT MANAGEMENT TOOL IMPORT CAN SOMETIMES CAUSE OFFENSES TO STOP GENERATING
IV94149 QRADAR PATCHING PROCESS CAN HANG FOR AN EXTENDED PERIOD OF TIME (HOURS) AT 'DUPLICATE REFERENCE DATA DETECTED. DELETING...'
IV93940 WHEN USING THE DSM EDITOR TO MAP EVENTS TO A CUSTOM QID, SUBSEQUENT MAPPING EVENT NAME IS 'UNKNOWN GENERIC EVENT'
IV93533 'SEND TO FORWARDING DESTINATIONS' OPTION FOR AN 'OFFENSE RULE' DISPLAYS NO AVAILABLE FORWARDING OPTIONS
IV93530 REPORTS BASED ON ADVANCED SEARCHES (AQL) THAT CONTAIN 'AS' DO NOT HAVE THE PROPER NAMED COLUMN HEADINGS
IV93454 AUDIT LOGGING DATA NOT AVAILABLE FOR QRADAR VULNERABILITY MANAGER SCAN PARAMETER AND SCHEDULED TIME CHANGES
IV93205 SCAN REPORTS NOT DISPLAYING IN THE LIST OF 'AVAILABLE REPORTS' WINDOW TO EMAIL AND CAUSING NULLPOINTER EXCEPTION
IV93191 REPORTS USING ADVANCED SEARCHES (AQL) CAN SOMETIMES HAVE INCORRECT AND/OR MISSING COLUMN HEADERS
IV93146 QRADAR VULNERABILITY MANAGER SCAN EXCLUSION SCREEN CAN SOMETIMES NOT LOAD, DISPLAYS AS A BLANK USER INTERFACE
IV93082 CSV OR XML EXPORT OF 'SCAN RESULT POLICY CHECK' SCREEN FAILS WITH ERROR 'THERE WAS A PROBLEM COMPLETING YOUR EXPORT...'
IV92977 VULNERABILITY SEARCH DASHBOARD ITEMS CHANGES DO NOT PERSIST AFTER LOG OUT OF THE QRADAR USER INTERFACE
IV92967 QUARTZ SCHEDULING LIBRARY INFORMATION MESSAGES ARE BEING WRITTEN INTO QRADAR LOGGING
IV92788 'AN ERROR OCCURED' POP UP MESSAGE CAN APPEAR WHEN NAVIGATING IN THE VULNERABILITIES TAB IN THE QRADAR USER INTERFACE
IV91674 SEARCHES USING A GEOGRAPHIC LOCATION FILTER CAN RETURN UNEXPECTED RESULTS
IV91607 'UNEXPECTED ERROR WHILE RETRIEVING GET_LOGS STATUS' WHEN A NON-ADMIN USER ACCESSES SYSTEM AND LICENCE MANAGEMENT
IV91286 TIMES SERIES NOT GENERATED FOR AQL SEARCHES CONTAINING MATHEMATICAL EXPRESSIONS
IV91098 INVAILD SUPER INDEXES CAN CAUSE 'GENERAL FAILURE. PLEASE TRY AGAIN' MESSAGES WHEN USED IN A FILTER IN SEARCHES
IV90792 USERS WITH DEFAULT DOMAIN PERMISSIONS CANNOT VIEW LOG SOURCE AND LOG SOURCE GROUP EVENT FILTERS
IV90305 REQUIRE UPDATED PACKAGE TO ADDRESS TURKEY'S DECISION TO NO LONGER ADJUST CLOCKS FOR DST
IV90000 THE /VAR/LOG/QRADAR-SQL.LOG FILE DOES NOT PROPERLY ROTATE AND/OR CAN BE TRUNCATED
IV89672 LDAP HOVER TEXT TOOLTIP DISPLAYS DUPLICATE VALUES
IV89309 SORT ON 'COUNT DESCENDING' ORDERING NOT WORKING AS EXPECTED IN REPORT OUTPUT
IV88334 LOG SOURCE REPORTS CAN FAIL AND DISPLAY NO RESULTS
IV88325 REPORT WIZARD CAN HANG WHEN CREATING A LOG SOURCE REPORT
IV87964 QRADAR APPLICATIONS USE THE CONSOLE'S PUBLIC IP IN NAT'D ENVIRONMENTS
IV87497 VULNERABILITY SEARCH DASHBOARD ITEMS CHANGES DO NOT PERSIST AFTER LOG OUT OF THE QRADAR USER INTERFACE

Issues resolved in 7.2.8 Patch 5
Number Description
IV93936 QRADAR 7.2.8 PATCH 4 FLOW COLLECTOR (12XX/13XX) PATCH PROCESS FAILS AT TEST WHEN PATCHING FROM VERSION 7.2.6.X OR 7.2.7.X

Issues resolved in 7.2.8 Patch 4
Number Description
SECURITY BULLETIN IBM QRADAR SIEM IS VULNERABLE TO A DENIAL OF SERVICE (CVE-2016-9740)
SECURITY BULLETIN IBM QRADAR SIEM AND QRADAR INCIDENT FORENSICS ARE VULNERABLE TO CROSS-SITE REQUEST FORGERY (CVE-2016-9730)
SECURITY BULLETIN IBM QRADAR SIEM IS VULNERABLE TO MISSING AUTHENTICATION CHECKS (CVE-2016-9729)
SECURITY BULLETIN IBM QRADAR SIEM AND QRADAR INCIDENT FORENSICS ARE VULNERABLE TO OS COMMAND INJECTION (CVE-2016-9726, CVE-2016-9727)
SECURITY BULLETIN IBM QRADAR SIEM IS VULNERABLE TO SQL INJECTION (CVE-2016-9728)
SECURITY BULLETIN IBM QRADAR INCIDENT FORENSICS IS VULNERABLE TO OVERLY PERMISSIVE CORS ACCESS POLICIES (CVE-2016-9725)
SECURITY BULLETIN IBM QRADAR SIEM IS VULNERABLE TO XML ENTITY INJECTION (CVE-2016-9724)
SECURITY BULLETIN IBM QRADAR SIEM AND QRADAR INCIDENT FORENSICS ARE VULNERABLE TO CROSS SITE SCRIPTING (CVE-2016-9723, CVE-2017-1133)
SECURITY BULLETIN IBM QRADAR SIEM AND QRADAR INCIDENT FORENSICS ARE VULNERABLE TO INFORMATION EXPOSURE (CVE-2016-9720)
SECURITY BULLETIN MOZILLA NSS AS USED IN IBM QRADAR SIEM IS VULNERABLE TO ARBITRARY CODE EXECUTION (CVE-2016-2834)
SECURITY BULLETIN PIVOTAL SPRING FRAMEWORK AS USED IN IBM QRADAR SIEM IS VULNERABLE TO VARIOUS CVEs
SECURITY BULLETIN APACHE SOLR AS USED IN IBM QRADAR SIEM AND INCIDENT FORENSICS IS VULNERABLE TO A DENIAL OF SERVICE
SECURITY BULLETIN IBM QRADAR SIEM CONTAINS HARD-CODED CREDENTIALS
SECURITY BULLETIN IBM QRADAR SIEM USES BROKEN OR RISKY CRYPTOGRAPHIC ALGORITHMS
SECURITY BULLETIN APACHE TOMCAT PRIOR TO VERSION 6.0.48 IS SUSCEPTIBLE TO SEVERAL VULNERABILITIES
SECURITY BULLETIN IBM QRADAR SIEM AND INCIDENT FORENSICS ARE VULNERABLE TO VARIOUS CVEs FOUND IN IBM JAVA.
SECURITY BULLETIN OPENSSL AS USED IN IBM QRADAR SIEM IS VULNERABLE TO VARIOUS CVEs
IV86405 'APPLICATION ERROR' WHEN USING A VALUE SPECIFIED IN 'AS' CLAUSE FOR LOGSOURCENAME IN AN ADVANCED SEARCH (AQL)
IV86407 THE /VAR/LOG PARTITION CAN FILL DUE TO THE QRADAR LOG FILES BEING QUICKLY FILLED WITH 'EXCEPTION IN TEST' MESSAGES
IV87313 'SOURCE' AND 'DESTINATION' NETWORK GROUP SHOW FULL NETWORK HIERARCHY NAME WHEN ADDED AS A COLUMN TO DISPLAY
IV87507 SOME DASBOARD ITEMS NO LONGER DISPLAY IN THE QRADAR USER INTERFACE
IV87862 RULE 'EXPLOIT: DESTINATION VULNERABLE TO DETECTED EXPLOIT' CAN SOMETIMES NOT TRIGGER WHEN EXPECTED
IV89015 APPLICATION ERROR WHEN DOUBLE CLICKING THE RESULTS OF AN 'ADVANCED SEARCH' (AQL)
IV89556 ECS-EP PROCESS RUNNING, BUT EVENT/FLOW PROCESSING NOT OCCURING ON A QRADAR APPLIANCE
IV89820 SYSLOG EVENTS GENERATED FROM AN OFFENSE RULE DO NOT CONTAIN ANY CONFIGURED NAMING CONTIBUTIONS IN THE EVENT PAYLOAD
IV89893 'ASSET MODEL HAS NOT YET BEEN UPDATED WITH SCAN RESULTS' MESSAGE WHEN NO ASSETS HAVE BEEN SCANNED
IV89904 QVM VULNERABILITY EXCEPTIONS FOR IP/CIDR/NETWORK ARE NOT RESPECTED WHEN A FILTER IS DEFINED TO EXCLUDE THEM
IV89929 'MISSING PATCHES' REPORT CAN SOMETIMES BE EMPTY WHEN RUN ON SYSTEMS WITH A LARGE NUMBER OF VULNERABILITY INSTANCES
IV90002 QVM RED WARNING TRIANGLE DISPLAYED ON A SCAN RESULT WHEN THE ASSET MODEL WAS PROPERLY UPDATED
IV90004 ASSET MODEL 'NOT UPDATED' ICON DISPLAYS FOR A SCAN PROFILE RESULT WHEN SCAN POLICY HAS BEEN EDITED
IV90075 RED WARNING ICON ON QVM SCAN RESULTS PAGE WHEN RESULTS HAVE BEEN REPUBLISHED
IV90376 SECURITY APP EXCHANGE APPLICATIONS CAN FAIL TO COMMUNICATE IN SOME HIGH AVAILABILITY QRADAR CONFIGURATIONS
IV90421 RULE TESTS AGAINST A REFERENCE MAP DO NOT WORK WHEN DESTINATION PORT IS NULL
IV90793 PATCHING TO QRADAR 7.2.8 GA OVERWRITES CA CERTS THAT WERE LOCATED IN /ETC/PKI/TLS/CERTS/CA-CUNDLE.CRT
IV90795 DRILLING INTO A SEARCH THAT WAS GROUPED BY A CUSTOM EVENT PROPERTY WITH PARENTHESIS DOES NOT WORK AS EXPECTED
IV90887 'ASSET MODEL HAS NOT YET BEEN UPDATED WITH SCAN RESULTS' MESSAGED DISPLAYED WHEN ASSET MODEL IS UPDATED CORRECTLY
IV90906 TIMES SERIES NOT WORKING FOR SOME NON-ADMIN QRADAR USERS
IV91300 CREATING A REPORT BASED ON AN AQL (ADVANCED SEARCH) QUERY CONTAINING 'ORDER BY' FAILS TO GENERATE PROPER OUTPUT
IV91322 ATTEMPTING TO ENABLE TIMESERIES COLLECTION FOR SHARED SAVED SEARCHES CAN SOMETIMES FAIL
IV91615 'ERROR: COULD NOT FIND OR LOAD MAIN CLASS COM.Q1LABS.CORE.UTIL . PASSWORDENCRYPT' WHEN CONFIGURING LDAP HOVER FEATURE
IV91618 EDIT SEARCH PAGE CAN SOMETIMES FAIL TO LOAD ALL OF THE EXPECTED SEARCH PAGE OPTIONS
IV91634 ARIEL SEARCHES THAT ARE RUN USING API VERSION 7.0+ DO NOT RETURN PAYLOAD PROPERLY FOR PARSING
IV91635 QUICK SEARCHES CANNOT BE REMOVED FROM THE QUICK SEARCH LIST
IV91675 AN 'APPLICATION ERROR' CAN BE DISPLAYED FOR NEW USERS LOGGING INTO THE QRADAR USER INTERFACE INSTEAD OF A DEFAULT DASHBOARD
IV91816 PATCHING QRADAR HIGH AVAILABILITY (HA) PAIR APPLIANCES CONFIGURED USING CROSSOVER CAN SOMETIMES FAIL
IV92139 'WRAP TEXT' FUNCTION FOR EVENT PAYLOAD INFORMATION DOES NOT WORK AFTER APPLYING QRADAR PATCH
IV92466 QRADAR SEARCHES CAN FAIL TO COMPLETE AND/OR DASHBOARD DATA CAN FAIL TO LOAD DUE TO AN ARIEL CONNECTION LEAK
IV92851 ARIEL CAN BECOME OVERLOADED CAUSING SLOWER THAN EXPECTED SEARCH RESULTS AND SLOW USER INTERFACE RESPONSE
IV92852 REPORTS RUNNING ON 'ACCUMULATED DATA' CAN SOMETIMES FAIL DUE TO THE GLOBAL VIEW DAILY ROLLUPS FAILING
IV93839 QRADAR FEATURES USING THE ARIEL PROCESS (SEARCHES, DASHBOARDS, REPORTS, ETC.) CAN INTERMITTENTLY FAIL TO LOAD/COMPLETE (NOTE: THIS APAR WAS RECENTLY ADDED AND MIGHT TAKE UP TO 12 HORUS TO DISPLAY)

Issues resolved in 7.2.8 Patch 3
Number Description
IV89519 RULES THAT TEST AGAINST REFERENCE MAP OF DATA SETS CAN SOMETIMES FIRE UNEXPECTEDLY
IV89901 QRADAR AUTO UPDATE FEATURE CONFIGURED TO USE A PROXY SERVER CAN FAIL AFTER PATCHING
IV91030 QRADAR APPS THAT REQUIRE SPECIFIC USER ROLE PERMISSIONS CAN STOP WORKING AFTER PATCHING TO QRADAR 7.2.8 PATCH 1
IV91617 QFLOW APPLIANCES CAN STOP SENDING FLOWS TO FLOW PROCESSORS AFTER PATCHING TO QRADAR 7.2.8
IV92220 TIME SERIES DATA ACCUMULATION DOES NOT WORK FOR NON-ADMIN DOMAIN USERS WITH MULTI-TENANCY DASHBOARD

Issues resolved in 7.2.8 Patch 2
Number Description
NONE QRADAR 7.2.8 PATCH 2 DOES NOT INCLUDE ANY RESOLVED ISSUES (APARs). THIS UPDATE INCORPORATES FRAMEWORK CHANGES IN ORDER TO SUPPORT THE NEW QRADAR NETWORK INSIGHTS APPLIANCE (19xx) IN A QRADAR DEPLOYMENT. THIS SOFTWARE VERSION WAS NOT PUBLISHED AS A GLOBAL SOFTWARE RELEASE. THIS DOWNLOAD IS ONLY AVAILABLE FROM QRADAR SUPPORT.

Issues resolved in 7.2.8 Patch 1
Number Description
SECURITY BULLETIN APACHE POI AS USED IN IBM QRADAR SIEM IS VULNERABLE TO VARIOUS CVEs (CVE-2012-0213, CVE-2014-3529, CVE-2014-3574, CVE-2014-9527, CVE-2016-5000)
SECURITY BULLETIN IBM QRADAR SIEM IS VULNERABLE TO VARIOUS CGI VULNERABILITIES (CVE-2016-5385, CVE-2016-5387, CVE-2016-5388)
IV77767 QRADAR USER INTERFACE OUTAGES CAN OCCUR WHEN TRYING TO LOAD THE MANAGED SEARCH RESULTS PAGE
IV83509 USING 'WHEN THE EVENT(S) HAVE NOT BEEN DETECTED...' RULE WITH A RESPONSE TO CREATE NEW EVENT, THAT EVENT HAS INCORRECT QID
IV83701 ERRORS VISIBLE IN QRADAR LOGGING AFTER A CUSTOM EVENT PROPERTY HAS BEEN SUCCESSFULLY DELETED
IV84025 UNABLE TO DELETE RULES THAT ARE ADDED TO THE GROUP 'ANOMALY'
IV84615 RULE OR BUILDING BLOCK DELETION CAN FAIL WHEN THERE ARE INVALID SEARCHES
IV86422 'MORE OPTIONS' IS DISPLAYED TWICE WHEN PERFORMING A RIGHT CLICK OF A SOURCE AND/OR DESTINATION IP IN A NETWORK ACTIVITY SEARCH
IV86683 THE EVENT PAYLOAD INFORMATION FIELD DOES NOT PROPERLY DISPLAY UTF DATA IF IT CONTAINS CONSECUTIVE SPACES OR A TAB CHARACTER
IV87248 HIGH AVAILABILITY CONSOLE WITH CROSSOVER CONNECTIONS CAN HANG AND/OR FAIL DURING QRADAR PATCHING
IV87577 QUICK FILTER CONTAINING DOUBLE-BYTE CHARACTERS ON LOG AND/OR NETWORK ACTIVITY TAB DOES NOT WORK AS EXPECTED
IV87796 CUSTOM EVENT PROPERTIES DO NOT FORWARD THROUGH A CUSTOM RULE RESPONSE WHEN USING JSON FORMAT
IV87859 SOME LOG SOURCES CAN FAIL TO BE IMPORTED DURING A CONTENT MANAGEMENT TOOL IMPORT
IV88275 NON-ADMIN QRADAR USERS ARE UNABLE TO FILTER ON 'EVENT PROCESSOR'
IV88279 USER ROLE WITH ONLY 'MANAGE LOG SOURCES' UNDER 'DELEGATED ADMINISTRATION' CANNOT PERFORM A QRADAR DEPLOY FUNCTION
IV88324 THE SYSTEM HEATH (QRADAR HEALTH CONSOLE) FEATURE CAN HAVE VARIOUS PROBLEMS AFTER APPLYING A QRADAR PATCH
IV88392 ORDERING OF ASSETS BY IP ADDRESS SOMETIMES DOES NOT WORK AS EXPECTED
IV88708 QRADAR VULNERABILITY MANAGER - ASSET DETAILS RISK POLICY SCREEN SHOWS INCORRECT TIMESTAMP IN LAST EVALUATED FIELD WHEN TIME ZONE IS SET FOR NEW ZEALAND
IV89064 THE QRADAR ARIEL API CAN SOMETIMES RETURN NO RESULTS WHEN PROCESSING LARGE NUMBERS OF SEARCH RESULTS
IV89173 QRADAR VULNERABILITY MANAGER - CIDR DATA ENTRY VALIDATION FOR SCANNERS DOES NOT WORK AS EXPECTED
IV89196 SEARCHING ON COMPRESSED DATA USING FILTER 'RETENTION BUCKET IS' RETURNS NO RESULTS
IV89308 THE QRADAR RULES PAGE FAILS TO LOAD OR TAKES A LONGER THAN EXPECTED TIME TO LOAD
IV89309 SORT ON 'COUNT DESCENDING' ORDERING NOT WORKING AS EXPECTED IN REPORT OUTPUT
IV89345 QVM: CIS SCAN RESULT STATUS CAN SOMETIMES DISPLAY AS FAIL INSTEAD OF UNKNOWN IN THE USER INTERFACE
IV89365 QVM VULNERABILITY FILTERING BY VENDOR AND DATE RANGE SOMETIMES DOES NOT RETURN THE COMPLETE LIST OF VULNERABILITIES
IV89367 QRADAR SYSTEM NOTIFICATION: 'TRANSACTION SENTRY: RESTORED SYSTEM HEALTH BY CANCELLING HUNG TRANSACTIONS OR DEADLOCKS
IV89393 CONTENT MANAGEMENT TOOL (CMT) EXPORT OF CUSTOM RULES FAILS WITH A NULLPOINTER EXCEPTION
IV89408 QRADAR VULNERABILITY MANAGER SCANS UNEXPECTEDLY DISPLAY A ZERO VULNERABILITY COUNT AND NO ASSETS CREATED FROM THOSE SCANS
IV89516 SAVED SEARCHES ATTEMPTING TO USE CVE-ID NUMBER DATA IN REFERENCE SETS DO NOT WORK AS EXPECTED
IV89665 FILTERING ON 'USERNAME IS ANY OF' " " (A BLANK SPACE WITHIN QUOTES) DOES NOT DISPLAY AS A CURRENTLY APPLIED FILTER
IV89901 QRADAR AUTO UPDATE FEATURE CONFIGURED TO USE A PROXY SERVER CAN FAIL AFTER PATCHING
IV90087 SEARCHES CAN TAKE A LONGER THAT EXPECTED TIME TO COMPLETE IN QRADAR 7.2.8 GA
IV90323 UNABLE TO DELETE REFERENCE SET ELEMENTS USING THE QRADAR USER INTERFACE
IV90372 ATTEMPTING TO ADD AN ADVANCED SEARCH (AQL) TEST TO A RULE CAN CAUSE THE USER INTERFACE WINDOW TO BECOME UNRESPONSIVE
IV90419 EVENT DATA WRITTEN INTO QRADAR AT VERSION 7.2.3.X OR PRIOR CANNOT BE READ BY QRADAR VERSION 7.2.7.X AND 7.2.8 GA
IV90460 QRADAR DEPLOY FUNCTION CAN FAIL AFTER PATCHING TO QRADAR 7.2.8 GA
IV90646 QFLOW PROCESS CAN STOP WORKING AS EXPECTED ON FLOW APPLIANCES AFTER PATCHING TO QRADAR 7.2.8 GA
IV90649 PATCH PROCESS TO 7.2.8 GA FAILS DUE TO A USER AND AUTHORIZED SERVICE HAVING THE SAME NAME
IV90777 NO FLOWS OR EVENTS VISIBLE IN THE QRADAR USER INTERFACE AFTER RESTORING A CONFIGURATION BACKUP FROM 7.2.8 GA

Issues resolved in 7.2.8
Number Description
IV81172 SQL EXCEPTION WHEN RUNNING EVENTS/LOGS REPORTS BASED ON ADVANCED SEARCH FOR ASSETS
IV87841 RULE TEST WITH MULTIPLE REFERENCE SETS ONLY MATCHES FIRST REFERENCE SET IN TEST
IV82547 WEB APPLICATION XJAVASCRIPT FILTERING BROKEN
IV84386 CRITSIT: LOG ACTIVITY - UI EXCEPTION POPUP WHEN MOUSING OVER IP ADDRESSES
IV88370 REFERENCE DATA - BULK LOADING PERFORMANCE NEEDS WORK
IV84710 ASSET SCREEN IN UI IS SLOW WHEN THE NUMBER OF ASSETS IS MODERATE TO LARGE
IV85584 RULE WIZARD UI ISSUES
IV79236 CRITSIT: CANNOT ACCESS RULE WIZARD WHEN NAVIGATING TO AN EVENT THROUGH AN OFFENSE
IV85435 OFFENSE NAMING NOT WORKING CONSISTENTLY
IV87029 INDEX ROLLER BUG
IV70567 AUTOUPDATE HTTPS AND PROXY INTERCEPTION - CONNECT FAILURES BY UPDATECONFS.PL
IV84567 OFFENSES OVER TIME REPORTS CAN MISMATCH OFFENSE SCREEN
IV86839 FILTERING IN LOG SOURCES WHILE SORTED BY EPS CAUSES EXCEPTION
IV82557 NULLPOINTEREXCEPTION IN DATA DELETION CAUSES USER UNABLE TO DELETE RULE OR CUSTOM EVENT PROPERTY
IV89021 EVENTS CONTAINING ESCAPED CHARACTERS ARE DISPLAYED INCORRECTLY IN THE CUSTOM EVENT PROPERTY SCREEN






Where do I find more information?


Cross reference information
Segment Product Component Platform Version Edition
Security IBM Security QRadar SIEM
Security IBM Security QRadar Vulnerability Manager
Security IBM Security QRadar Incident Forensics
Security IBM Security QRadar QFlow Collector
Security IBM Security QRadar Risk Manager
Security IBM Security QRadar Data Node

Document information

More support for: IBM QRadar SIEM
Release Notes

Software version: 7.2

Operating system(s): Linux

Reference #: 7050695

Modified date: 04 January 2018