IBM Integration Bus Manufacturing Pack 1.0 readme

Download IBM Integration Bus Manufacturing Pack Version 1.0.0.2 by using the following instructions:
http://www.ibm.com/support/docview.wss?uid=swg24042545

Always use the latest version of this readme file, which is available in English only at:
http://www.ibm.com/support/docview.wss?uid=swg27006917

For information about the tasks you must complete before you install the product, see IBM Integration Bus Manufacturing Pack product documentation at:

• http://www.ibm.com/support/knowledgecenter/SSMKHH_10.0.0/com.ibm.manufacturing.doc/ma00099.htm (for IBM Integration Bus 10.0)

Installation information is available in the IBM Integration Bus Manufacturing Pack product documentation at:

• http://www.ibm.com/support/knowledgecenter/SSMKHH_10.0.0/com.ibm.manufacturing.doc/ma00099.htm (for IBM Integration Bus 10.0)

The online product documentation for IBM Integration Bus Manufacturing Pack is available at:

• http://www.ibm.com/support/knowledgecenter/SSMKHH_10.0.0/com.ibm.manufacturing.doc/ma00000.htm (for IBM Integration Bus 10.0)

Defects: This readme file might contain references to defect numbers. These numbers refer to internal IBM problem numbers; you might find these numbers useful when discussing problems with your IBM service representative.

Technotes: For current information about known problems and available fixes, see the IBM Integration Bus support website at:
http://www.ibm.com/support/entry/portal/Software/WebSphere/WebSphere_Message_Broker
To find information, click Troubleshooting documentation. IBM Integration Bus and IBM Integration Bus Manufacturing Pack Technotes are displayed and can be ordered and searched.

For information about how to download IBM Integration Bus Manufacturing Pack Version 1.0 installation images from the Passport Advantage website, see the Accessing the Installer topic in the IBM Integration Bus product documentation, which is available at:

• http://www.ibm.com/support/knowledgecenter/SSMKHH_10.0.0/com.ibm.manufacturing.doc/ma00091.htm (for IBM Integration Bus 10.0)

Check periodically for updates to the IBM Integration Toolkit, including documentation updates in English and in other supported languages. Recommended fixes for IBM Integration Bus Manufacturing Pack can be found at:
http://www.ibm.com/support/docview.wss?uid=swg27006041

This section outlines the known problems and their workarounds (if any) of the IBM Integration Bus Manufacturing Pack, by component.

Symptom:
If you uninstall IBM Integration Bus Manufacturing Pack, the uninstallation seems to be unresponsive for long periods of time. The uninstallation might also seem to be unresponsive while it is reporting that it is removing an item.

Solution:
Wait for the uninstallation to complete. The uninstallation is running normally, but on some machine configurations it might take longer than expected to complete. If the uninstallation is unresponsive and stays on the same panel for longer than 30 minutes, cancel the uninstallation. If any of the following directories or files remain, remove them:

• On HP-UX: Uninstallation seems to be unresponsive
  • The ManufacturingPack directory, the default location is:
  
  
  • /opt/IBM/ManufacturingPack/Version

    where Version is the version of IBM Integration Bus Manufacturing Pack.

  • If you installed the "Pattern and nodes for the IBM Integration Toolkit" component, remove the com.ibm.broker.manufacturing.link file, or replace it with a backup. The default location is:
  
  
  • /opt/IBM/IntegrationToolkit90/links/com.ibm.broker.manufacturing.link
  • If you installed the "Web user interface and nodes for the Integration Bus component" component, remove the ManufacturingPack_Version file. The default location is:
  
  
  • /var/mqsi/common/profiles/ManufacturingPack_Version.sh
    where Version is the version of IBM Integration Bus Manufacturing Pack.

• No known issues

• No known issues

• No known issues

Symptom:
You might see the following error when you start IBM Integration Bus Manufacturing Pack:

Jun 20 10:16:06 host_brokername[9010]: [ID 702911 user.error] IBM Integration Bus v9001 (host) [Thread 34] (Msg 1/1)
   BIP3836E: An exception occurred when applying the MQSI_ADDITIONAL_CONTEXT_ROOTS environment variable because
   web UI extension '' does not exist.

where host_brokername is the name of your integration node.

Solution:
This error can be safely ignored.

This issue is fixed in IBM Integration Bus Manufacturing Pack Version 1.0.0.1.

• On UNIX: BIP3836E is seen in the system log when you start the integration node after you install IBM Integration Bus Manufacturing Pack.

Symptom:
When the PI-Input node handles a downstream exception and the Catch terminal is not wired, the integration server might generate an abend file and restart.

Solution:
Wire the Catch terminal of the PI-Input node to a valid output node or apply IBM Integration Bus APAR IT02820.

Symptom:
When you are overriding the PI-Read node "Generate Mode" property in the BAR file editor, you do not see a drop-down list from which to select a valid value.

Explanation:
This problem is due to a limitation with the BAR file editor.

Solution:
Enter a valid value manually. The following values are valid: "Message" and "LocalEnvironment". For more information, see PI-Read node in the IBM Integration Bus Manufacturing Pack documentation.

Symptom:
If a message flow that contains an OPC-UA-Input node is included in a BAR file that is built with the "compile and in-line resources" property unselected, any properties that are overridden, either in the BAR file or by running the mqsiapplybaroverride command, are ignored on deployment and no errors are seen.

Solution:
Either build the BAR file with the "compile and in-line resources" option selected, or apply IBM Integration Bus APAR IC98420.

Symptom:
When you are using the MQTT nodes with the activity log enabled, BIP2113E messages might be logged in the system log:

BIP2113 - (integration_node_name) Message broker internal error:
diagnostic information ''handle is null'', ''Connector'', ''writeActivityLog''.  

An internal software error has occurred in the message broker.
Further messages will indicate the effect of this error on the broker's transactions.  

Shutdown and restart the message broker.
If the problem continues to occur, then restart the system.
If the problem still continues to occur, contact IBM Support.

where integration_node_name is the name of your integration node.

Solution:
Apply IBM Integration Bus APAR IT02690.

• The integration server abends while it is handling an exception in the PI-Input node.


• The PI-Read node drop-down list for the "Generate Mode" property is not available in the Broker Archive editor.


• OPC-UA-Input node property overrides are ignored on deployment.


• You receive a BIP2113E error while you are using the MQTT nodes with activity log enabled.

• No known issues

Copyright and trademark information

For more information about this topic, see the IBM Copyright and trademark information web page.

This information was developed for products and services offered in the US.

IBM might not offer the products, services, or features discussed in this information in other countries. For more information about the products and services currently available in your area, Consult your local IBM representative. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service can be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right can be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service.

IBM might have patents or pending patent applications covering subject matter described in this information. The furnishing of this information does not give you any license to these patents. You can send license inquiries, in writing, to:

IBM Corporation
1 New Orchard Road
Armonk
New York
10504-1722
United States

For license inquiries regarding double-byte character set (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to:

IBM Japan Ltd
IP Licensing
19 - 21 Nihonbashi Hakozaki-cho
Chuo-ku 
Tokyo 103-8510
Japan

The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law:

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This statement might not apply to you because some states do not allow disclaimer of express or implied warranties in certain transactions.

This information might include technical inaccuracies or typographical errors. Changes are periodically made to this information; these changes are incorporated in new editions of the information. IBM can make improvements to the products and programs described in this information, changes in the products and programs described in this information, or both, at any time without notice.

Any references in this information to non-IBM websites are provided for convenience only and do not in any manner serve as an endorsement of those websites. The materials at those websites are not part of the materials for this IBM product and use of those websites is at your own risk.

IBM can use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

Licensees of this program who want to have information about it for enabling: (i) the exchange of information between independently created programs and other programs (including this program) and (ii) the mutual use of the information that is exchanged, can contact:

IBM App Connect
IBM United Kingdom Laboratories
Hursley Park
Winchester
Hampshire
England
SO21 2JN

Such information might be available, subject to appropriate terms and conditions, including in some cases, payment of a fee.

The licensed program described in this information and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Programming License Agreement, or any equivalent agreement between us.

Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements, or other publicly available sources. IBM did not test those products and cannot confirm the accuracy of performance, compatibility, or any other claims related to non-IBM products. Address any questions on the capabilities of non-IBM products to the suppliers of those products.

This information includes examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental.

Copyright license:

This information contains sample application programs in source language, which illustrate programming techniques on various operating platforms. You can copy, modify, and distribute these sample programs in any form without payment to IBM in the following circumstances: For the purposes of developing, using, marketing, or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples are not thoroughly tested under all conditions. Therefore, IBM cannot guarantee or imply reliability, serviceability, or function of these programs. You can copy, modify, and distribute these sample programs in any form without payment to IBM for the purposes of developing, using, marketing, or distributing application programs conforming to IBM's application programming interfaces.

The following terms are trademarks of International Business Machines Corporation in the United States, other countries, or both:

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle, its affiliates, or both.

Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.

UNIX is a registered trademark of The Open Group in the United States and other countries.

The registered trademark Linux® is used in accordance with a sublicense from the Linux Foundation, the exclusive licensee of Linus Torvalds, owner of the mark on a world­wide basis.

PI Server is a registered trademark of OSIsoft, LLC. in the United States, other countries, or both.

Other company, product or service names might be trademarks or service marks of others.

IBM Integration Bus product page
http://www.ibm.com/software/products/us/en/ibm-integration-bus/

WebSphere MQ Fix Packs
http://www.ibm.com/support/entry/portal/Software/WebSphere/WebSphere_MQ

IBM Integration Bus Fix Packs
http://www.ibm.com/support/docview.wss?uid=swg27006041

IBM Integration Bus Requirements
http://www.ibm.com/software/integration/wbimessagebroker/requirements/

IBM Integration Bus readme file
http://www.ibm.com/support/docview.wss?uid=swg27006917

IBM Integration Bus Manufacturing Pack 1.0 online product documentation:

• http://www.ibm.com/support/knowledgecenter/SSMKHH_10.0.0/com.ibm.manufacturing.doc/ma00000.htm (for IBM Integration Bus 10.0)

IBM Centre for Java™ Technology Development Downloads
http://www.ibm.com/developerworks/java/jdk/

IBM Integration Developer Center on developerWorks
https://developer.ibm.com/integration/docs/manufacturing-integration/

IBM Integration Community