IBM Cúram Social Program Management 6.0.5.1 iFix2

Release notes


Abstract

These are the latest release notes for IBM Cúram Social Program Management 6.0.5.1 iFix2.

Content

Introduction
Installing the iFix
Improvements and Resolved Issues
Notices


Introduction

Welcome to this iFix release.

See the FileList.txt file for the list of all files delivered in this iFix.

This is a cumulative release which incorporates the Improvements and Resolved Issues contained in all previous 6.0.5.1 iFix releases. Details of these Improvements and Resolved Issues are included separately in the release notes for each of the previous iFix releases. The release notes for the previous iFix releases are available at http://www.ibm.com/support/docview.wss?uid=swg27037963



Installing the iFix

iFix Pre-Installation Steps
iFix Installation

iFix Pre-Installation Steps

Prior to running the installer please ensure all files are writable in the Installer sub-directory, located at the root of the Cúram installation. In addition, ensure all files listed in the FileList.txt file are writable.

iFix Installation

The installation steps are as follows:

  • Extract the contents of the zip file to a local drive location.
  • Run the Cúram installer, which can be found in the INSTALLER folder at that location.
  • After installation you must do a full clean build of your client and server and rebuild your EAR file/s.


Improvements and Resolved Issues

Cúram Enterprise Framework
Solutions

Cúram Enterprise Framework

Integrated Case Management

Evidence Management

PO01449, SPMP-10717 - Stop processing of all precedents recorded during execution of PDCConversion batch

Previously, when the PDCConversion batch job executed, precedents were raised by CER.

This resulted in the following warning message being output to the log file at the end of each chunk:

"One or more precedent changes have been written to the currently-open precedent change set for batch processing. Please arrange for a run of the precedent change set batch processing suite to be scheduled."

The constant outputting of this log message can render the log file un-readable to a customer. Also the precedents being raised served no purpose when produced by the PDCConversion batch job.

This enhancement disables raising of all precedents during the execution of the PDCConversion batch. This change has a small performance improvement and also substantially reduces the amount of logging output by the PDCConversion batch process.

To verify precedents are not being raised following this enhancement you can use the following steps.

1. Execute select count(*) from precedentchangeitem;

2. Run PDCConversion batch job

3. Execute select count(*) from precedentchangeitem;

The counts should not increase.

CEF - Dynamic Evidence

Evidence Maintenance
CDP-1128 - EvidenceTransactionalCache.invalidationCache() floods the system with cache invalidation messages

Dynamic Evidence Create, Read and Modify operations maintain a Transaction cache to provide quick access to commonly used items throughout that operation's transaction. At the end of the operation the cache is invalidated.

Previously, when the Dynamic Evidence Transaction Cache was invalidated, a global cache invalid message was incorrectly posted via 'CacheManagerEjb.postInvalidationMessage()'. This unnecessary broadcast effectively rendered the Cúram cache invalidation topic unusable under high load conditions.

The global cache invalidation message is no longer posted when Dynamic Evidence Transaction cache is invalidated so the Cúram cache invalidation topic will no longer be impacted during high load conditions

Solutions

Income Support

PO00867, CGISS-4283 - Transfer to Trust record cannot be added

Previously, transfer to trust evidence could not be recorded due to a validation being incorrectly displayed.

"Transfer to Trust parent evidence which is ownership is not active"

This message is now only displayed if Ownership evidence is not active. Once all evidence is active, transfer to trust evidence can now be recorded.

CGISS-6358 - Optimizing the "CGISS Relationship Conversion" batch job query

Previously, the "CGISS Relationship Conversion" batch job considered integrated cases which had dynamic household relationship evidence. The upgrade helper should only upgrade cases which have non dynamic relationship evidence.

This issue has been resolved.

CGISS-6360 - "CGISS Relationship Conversion" batch issue

Previously, the batch job "CGISS Relationship Conversion" used the maximum number of rows specified by the 'curam.db.readmultimax' property. The batch job should process all records.

This issue has been resolved and the additional parameter, "-Djava.extra.jvmargs="-Dcuram.db.readmultimax=0" does not need to be specified to execute the batch job.



Notices

Notices

This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to:

IBM Director of Licensing

IBM Corporation

North Castle Drive

Armonk, NY 10504-1785

U.S.A.

For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to:

Intellectual Property Licensing

Legal and Intellectual Property Law.

IBM Japan Ltd.

19-21, Nihonbashi-Hakozakicho, Chuo-ku

Tokyo 103-8510, Japan

The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.

IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact:

IBM Corporation

Dept F6, Bldg 1

294 Route 100

Somers NY 10589-3216

U.S.A.

Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee.

The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us.

Any performance data contained herein was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.

Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources.

IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.

All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only

All IBM prices shown are IBM's suggested retail prices, are current and are subject to change without notice. Dealer prices may vary.

This information is for planning purposes only. The information herein is subject to change before the products described become available.

This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental.

COPYRIGHT LICENSE:

This information contains sample application programs in source language, which illustrate programming techniques on various operating platforms. You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples have not been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs. The sample programs are provided "AS IS", without warranty of any kind. IBM shall not be liable for any damages arising out of your use of the sample programs.

Each copy or any portion of these sample programs or any derivative work, must include a copyright notice as follows:

your company name) (year). Portions of this code are derived from IBM Corp. Sample Programs.

Copyright IBM Corp. _enter the year or years_. All rights reserved.

If you are viewing this information softcopy, the photographs and color illustrations may not appear.

Trademarks


Trademarks

IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at http://www.ibm.com/legal/us/en/copytrade.shtml.

Adobe, the Adobe logo, and Portable Document Format (PDF), are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, other countries, or both.

Microsoft and Word are trademarks of Microsoft Corporation in the United States, other countries, or both.

Other names may be trademarks of their respective owners. Other company, product, and service names may be trademarks or service marks of others.



Licensed Materials - Property of IBM

Copyright IBM Corporation 2013. All rights reserved.

US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.



Rate this page:

(0 users)Average rating

Document information


More support for:

Cúram Social Program Management

Software version:

6.0.5

Operating system(s):

AIX, HP-UX, Linux, Solaris, Windows, z/OS

Reference #:

7039024

Modified date:

2013-07-30

Translate my page

Machine Translation

Content navigation