IBM Support

Requirements for IBM Content Classification Version 8.8

Product Documentation


Abstract

This page provides detailed software requirements for IBM Content Classification, Version 8.8 and each subsequent fix pack.

This page describes the minimum product levels to install before opening a problem report with the IBM Content Classification support team. Because other products frequently ship fixes, updates, and new releases, we cannot test every possible configuration. In general, you can install and run with updates, such as fix packs, to supported product releases (not necessarily significant new product versions), if those updates are forward compatible.

Content

System requirements for IBM Content Classification Version 8.8

Links to navigation


Content Classification

Product integrations

Email systems



Classification Quick Start Tool

Classification Workbench

Classification Center

IBM Knowledge Center



             
Legend
IconDescription
Supported Supported
ΔAdded or changed information since the last release, modification, or fix pack. This mark in the far left column indicates new or changed information in the row. This mark in a particular cell within a row further identifies a specific change within an existing row.
x86Intel 32-bit processors, including IBM System x, eServer xSeries, and BladeCenter servers.
x86-6464-bit AMD Opteron (AMD64) and Intel Xeon (EM64T) processors, including IBM System x and BladeCenter servers.
POWERIBM POWER-based processors, including IBM System p, eServer pSeries, System i, and eServer iSeries servers.
SPARCSun SPARC-based processors.




Operating system (Content Classification)

The following table specifies the operating system for any computer on which you install the IBM Content Classification server.

Operating system (required)Hardware platform:Notes
x86
x86-64
POWER
SPARC
ΔAIX 5.3 TL7 (64-bit)
(bos.rte.libc 7.1.0.0)


Supported on POWER


ΔAIX 6.1 (64-bit)

Supported on POWER


ΔAIX 7.1 (64-bit)

Supported on POWER



Red Hat Enterprise Linux AS/ES 5.x (32-bit)
Kernel 2.6.18-8.el5
Supported on x86



Requires the libstdc++.so.5 library.
ΔRed Hat Enterprise Linux AS/ES 5.x (64-bit)
Supported on x86-64


Requires the libstdc++.so.5 library.
ΔRed Hat Enterprise Linux AS/ES 6.x (32-bit)
Supported on x86



Requires the libstdc++.so.5 library.
ΔRed Hat Enterprise Linux AS/ES 6.x (64-bit)
Supported on x86-64


The following libraries must be installed on your computer before you install Content Classification:
  • libstdc++.so.5
  • libX11.so.6
  • libstdc++.so.6
  • libz.so.1

SUSE Linux Enterprise Server 10 (32-bit)
Kernel 2.6.16.21-0.8-smp #1
Supported on x86



Requires the libstdc++.so.5 library.
ΔSUSE Linux Enterprise Server 10 (64-bit)
Supported on x86-64


Requires the libstdc++.so.5 library.
ΔSUSE Linux Enterprise Server 11 (32-bit)
Supported on x86



Requires the libstdc++.so.5 library.
ΔSUSE Linux Enterprise Server 11 (64-bit)
Supported on x86-64


Requires the libstdc++.so.5 library.

Sun Microsystems Solaris 10


Supported on SPARC
The version of the libstlport.so library that is available with Sun Studio 8 must be installed on the Solaris computer.

Microsoft Windows Server 2003 Enterprise Edition
(32-bit) with SP2
Supported on x86




ΔMicrosoft Windows Server 2003 Enterprise Edition
(64-bit) with SP2

Supported on x86-64




Microsoft Windows Server 2008 Enterprise Edition
(32-bit)
Supported on x86



You must run the Content Classification installation program as an administrator. Right-click the classificationsetup88_win32.exe file and select Run as Administrator.
ΔMicrosoft Windows Server 2008 Enterprise Edition
(64-bit)

Supported on x86-64


You must run the Content Classification installation program as an administrator. Right-click the classificationsetup88_win32.exe file and select Run as Administrator.
ΔMicrosoft Windows Server 2008 R2 (64-bit)
Supported on x86-64


You must run the Content Classification installation program as an administrator. Right-click the classificationsetup88_win32.exe file and select Run as Administrator.
ΔMicrosoft Windows Server 2012 R2 (64-bit)
Supported on x86-64


You must run the Content Classification installation program as an administrator. Right-click the classificationsetup88_windows2012_win32.exe file and select Run as Administrator.
ΔMicrosoft Windows Server 2016 Standard
Supported on x86-64


You must run the Content Classification installation program as an administrator. Right-click the  classificationsetup88_windows2012_win32.exe file and select Run as Administrator.
ΔMicrosoft Windows 7 (64-bit)
Supported on x86-64


You must run the Content Classification installation program as an administrator. Right-click the classificationsetup88_win32.exe file and select Run as Administrator.
ΔMicrosoft Windows 2010 Enterprise
Supported on x86-64


You must run the Content Classification installation program as an administrator. Right-click the classificationsetup88_win32.exe file and select Run as Administrator.

Operating system (Classification Workbench)

The following table specifies the operating system for any computer on which you install the Classification Workbench application:



Operating system (required)Hardware platform:Notes
x86
x86-64
POWER
SPARC

Microsoft Windows Server 2003 Enterprise Edition
(32-bit) with SP2
Supported on x86




ΔMicrosoft Windows Server 2003 Enterprise Edition
(64-bit) with SP2

Supported on x86-64




Microsoft Windows Server 2008 Enterprise Edition
(32-bit)
Supported on x86



You must run Classification Workbench as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Workbench, and select Run as administrator.
ΔMicrosoft Windows Server 2008 Enterprise Edition
(64-bit)

Supported on x86-64


You must run Classification Workbench as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Workbench, and select Run as administrator.
ΔMicrosoft Windows Server 2008 R2 (64-bit)
Supported on x86-64


You must run Classification Workbench as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Workbench, and select Run as administrator.
ΔMicrosoft Windows Server 2016 Standard
Supported on x86-64


You must run Classification Workbench as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-clickClassification Workbench, and select Run as administrator
ΔMicrosoft Windows Server 2012 R2 (64-bit)
Supported on x86-64


You must run Classification Workbench as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-clickClassification Workbench, and select Run as administrator. 
ΔMicrosoft Windows 7 (64-bit)
Supported on x86-64


You must run Classification Workbench as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Workbench, and select Run as administrator.
ΔMicrosoft Windows 2010 Enterprise
Supported on x86-64


You must run Classification Workbench as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-clickClassification Workbench, and select Run as administrator.

Operating system (Classification Quick Start Tool)

The following table specifies the operating system for any computer on which you install the Classification Quick Start Tool application:



Operating system (required)Hardware platform:Notes
x86
x86-64
POWER
SPARC

Microsoft Windows Server 2003 Enterprise Edition
(32-bit) with SP2
Supported on x86





Microsoft Windows Server 2008 Enterprise Edition
(32-bit)
Supported on x86



You must run the Classification Quick Start Tool as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Quick Start Tool, and select Run as administrator.

Microsoft Windows Server 2008 Enterprise Edition
(64-bit)

Supported on x86-64


You must run the Classification Quick Start Tool as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Quick Start Tool, and select Run as administrator.

Microsoft Windows Server 2008 R2 (64-bit)
Supported on x86-64


You must run the Classification Quick Start Tool as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Quick Start Tool, and select Run as administrator.
ΔMicrosoft Windows Server 2016 Standard
Supported on x86-64


You must run the Classification Quick Start Tool as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Quick Start Tool, and select Run as administrator.

Microsoft Windows Server 2012 R2 (64-bit)
Supported on x86-64


You must run the Classification Quick Start Tool as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Quick Start Tool, and select Run as administrator.

Microsoft Windows 7 (64-bit)
Supported on x86-64


You must run the Classification Quick Start Tool as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Quick Start Tool, and select Run as administrator.
ΔMicrosoft Windows 2010 Enterprise
Supported on x86-64


You must run the Classification Quick Start Tool as an administrator. Click Start > Programs > IBM Content Classification 8.8, right-click Classification Quick Start Tool, and select Run as administrator

Disk space

The following table specifies the minimum disk space required to install the IBM Content Classification server software.


Disk space (minimum)Operating system:Notes
AIX
Linux
Solaris
Win
Δ2 GB for the Content Classification software, plus 2 GB of temporary disk space
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
This is the minimum required to install the software. More space is needed to run a Content Classification system.

Memory

The RAM specifications in the following table reflect basic server requirements for a development or small installation. Actual memory requirements relate directly to the size of the knowledge bases, the number of languages supported, and performance requirements.


RAM (minimum)Operating system:Notes
AIX
Linux
Solaris
Win
Δ4 GB
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows


Processor

The processor specifications in the following table reflect basic server requirements for a development or small installation. Actual system requirements relate directly to the size of the knowledge bases, the number of languages supported, and performance requirements.


Processor (minimum)Operating system:Notes
AIX
Linux
Solaris
Win
Δ2 or more POWER6 cores
Supported on AIX




Δ2 or more Intel Core i3 cores(or equivalent)
Supported  on Linux
Supported on Solaris
Supported on Windows


Compilers (optional)

The following table specifies the compilers that you can use to run the sample programs and for client application development.


Compiler (optional)Operating system:Notes
AIX
Linux
Solaris
Win
Δgcc version 4.1.2 20080704 (Red Hat Linux)
Supported  on Linux


Δgcc version 4.1.2 20070115 (SUSE Linux)
Supported  on Linux



Java Development Kit (JDK) 6.0 or higherSupported on AIXSupported  on LinuxSupported on Solaris Supported on Windows
ΔMicrosoft Visual Studio 2008 version 9.0 SP1


Supported on Windows
ΔIBM XL C/C++ Enterprise Edition V8.0 for AIX
Version: 08.00.0000.0000
Supported on AIX



ΔCC: Sun C++ 5.5 2003/03/12

Supported on Solaris


Product integrations

IBM Content Classification integrates with several IBM products to provide classification support for your enterprise content management, compliance, and search solutions.


Integrated solutionOperating system:Notes
AIX
Linux
Solaris
Win

IBM InfoSphere Content Collector, Version 2.1.1


Supported on Windows
Requires manual configuration. Click here for instructions.

IBM Content Collector, Version 2.2 Fix Pack 2


Supported on Windows
Requires manual configuration. Click here for instructions.
ΔIBM Content Collector, Version 3.0


Supported on Windows

ΔIBM Content Collector, Version 4.0


Supported on Windows


IBM Content Manager Enterprise Edition, Version 8.4.1
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
Requires the IBM Content Manager Version 8 connector from IBM Information Integrator for Content Version 8.4.1
IBM Content Manager Enterprise Edition, Version 8.4.2
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
Requires the IBM Content Manager Version 8 connector from IBM Information Integrator for Content Version 8.4.2
Δ
IBM Content Manager Enterprise Edition, Version 8.4.3
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
Requires the IBM Content Manager Version 8 connector from IBM Information Integrator for Content Version 8.4.3
Δ
IBM Content Manager Enterprise Edition, Version 8.5
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
Requires the IBM Content Manager Version 8 connector from IBM Information Integrator for Content Version 8.5

IBM FileNet Content Manager, Version 4.0.1
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows


IBM FileNet Content Manager, Version 4.5
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows


IBM FileNet Content Manager, Version 4.5.1
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows

ΔIBM FileNet Content Manager, Version 5.0
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows

ΔIBM FileNet Content Manager, Version 5.1
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows

ΔIBM FileNet Content Manager, Version 5.2
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows


IBM FileNet Records Manager, Version 4.0
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
Requires IBM FileNet Content Manager.

IBM FileNet Records Manager, Version 4.5
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
Requires IBM FileNet Content Manager.
IBM InfoSphere Enterprise Records (formerly FileNet Records Manager), Version 4.5.1
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
Requires IBM FileNet Content Manager.
ΔIBM Enterprise Records, Version 5.1
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
Requires IBM FileNet Content Manager.
ΔIBM Enterprise Records, Version 5.1.2
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
Requires IBM FileNet Content Manager Version 5.2 Fix Pack 3.
ΔIBM Enterprise Records, Version 5.2.0.2
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows
Requires IBM FileNet Content Manager.

Email systems

The following table specifies software that must be installed to import Microsoft Outlook email messages in PST format into Classification Workbench.


Email applicationOperating system:Notes
AIX
Linux
Solaris
Win
ΔMicrosoft Office Outlook 2007 and 2010


Supported on Windows
Microsoft Office Outlook must be installed on the computer on which Classification Workbench is installed and set as the default email application in your browser software.

Runtime environment

The following table specifies the runtime environment that is required for Classification Quick Start Tool.


Runtime environmentOperating system:Notes
AIX
Linux
Solaris
Win

Microsoft .NET Framework Version 4


Supported on Windows


Browser

The following table specifies the required browser software for the Classification Workbench application, Classification Center application, and users of IBM Knowledge Center.


Browser (product components)Operating system:Notes
AIX
Linux
Solaris
Win
ΔMicrosoft Internet Explorer 8, 9, 10


Supported on Windows

ΔMozilla Firefox 17, 24, 29
Supported on AIX
Supported  on Linux
Supported on Solaris
Supported on Windows


Note: For both Linux64 and Windows platform after installation of IBM Content Classification base version 8.8, install the IBM Content Classification Fix Pack 1 and then latest Interim Fix Package respectively. For AIX machine you need to install the Fix pack 2.

[{"Product":{"code":"SSBRAM","label":"IBM Content Classification"},"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Component":"--","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"}],"Version":"8.8","Edition":"","Line of Business":{"code":"LOB45","label":"Automation"}}]

Document Information

Modified date:
17 June 2018

UID

swg27020838