Tivoli Netcool/OMNIbus_GUI 7.4.0 Fix Pack 3, 7.4.0-TIV-NCOMNIbus_GUI-FP0003

Downloadable files


Abstract

This fix pack is a cumulative fix release and addresses some new APARs and internally found issues since the release of Tivoli Netcool/OMNIbus Web GUI 7.4.0 Fix Pack 2.

Download Description

Known Issues

================
Recommend to use Tivoli Integrated Portal IFix PI12213-IFix.zip and SmartCloud Analytic Log Analysis Hot Fix 1.2.0.0-CSI-SCALA-IF0002 on top of WebGUI 7.4.0.3 to avoid known issues.

1. APAR PM96715: TIP2.2.0.11: Unable to join HA cluster
More information and the workaround can be found in the following technote
link: http://www-01.ibm.com/support/docview.wss?uid=swg21649391

2. APAR PM78026: TIP2.2.0.11: WAAPI add ilter failed for user with inverted comma, user'10
More information and the workaround can be found in the following interim fix
link: http://www-933.ibm.com/support/fixcentral/swg/selectFixes?parent=ibm~WebSphere&product=ibm/WebSphere/WebSphere+Application+Server&release=7.0.0.25&platform=AIX&function=all
Note: APAR IV30590 is affected by this issue

3. alm00304777 / IV55855: INTEGRATION OF PROMPTS AND METRICS - INVALID PROMPTS AND METRICS (APAR=IV55855)

Summary:
Further changes to the new integration of Prompts and Metrics. The following have been included:
Error message prompt is not user friendly in Metrics GUI.
Error page displayed when adding new Label for 2nd time onwards for type of Fixed Choice on IE8
When dynamic/real time prompt has blank/empty values, prompts dialog not displayed on event viewer. Cause: Fails to parse JSON

4. alm00304773 / IV55860: INTEGRATION OF PROMPTS/METRICS: HELP BOOK (APAR=IV55860)

Summary:
Further changes to the new integration of Prompts and Metrics. The following have been included:
Insufficient info in Help book.

5. alm00304775 / IV55863: INTEGRATION OF PROMPTS/METRICS - ALIGNMENT (APAR=IV55863)

Summary:
Further changes to the new integration of Prompts and Metrics. The following have been included:
Alignment distorted on Prompt GUI and Gauge page


Issues and Enhancements addressed in 7.4.0.3 FP3
================================================

Enhancements
=============
A new checkbox is now visible in the User Preferences which allows
the user to show/hide system filters in event lists. The value of
this checkbox will be reflected across all AELs and then Event
Viewer. By default it is set to false and is located in the
PRODUCT_HOME/etc/default/system/userdefaults.props file under
'ael_user_properties_show_system_filters'. Admin will need to manually
add this attribute into the PRODUCT_HOME/etc/system/userdefaults.props
and restart TIP server in order for it to take effect.
New user that is created after the restart will have this attribute
reflected correctly in their User Preference page.
It should also be noted that this new checkbox replaces the checkbox
located in the portlet preferences page of the Event Viewer.

Because the ability to show/hide system filters is now a user
preference and not a portlet preference, it can't be passed as a
parameter when loading an AEL or Event Viewer. For example with a
smartpage that contains an AEL insert snippet, whether or not system
filters are displayed depends on the value of the
'Show system filters in event lists' checkbox in the User Preferences
page.

Defects
=========

alm00246976 / IV04057
=====================
Short Description: AEL SIZING AND COLUMS RESET BACK TO DEFAULT

Summary:
When changing the column size or relocating a column/s to a
new location within the AEL, it resets the sizing and
column arrangement back to the default after a while. This
happens when configuration changes occur at Web GUI triggers
AEL config resync with the server. AEL refreshes the view
even when there are no changes made to the view associated
with the AEL.


alm00285385 / IV32343
=====================
Short Description: USER'S TIMEZONE PREFERENCE DOES NOT REFLECT ON JOURNALS

Summary:
Timestamp of Journal entries do not change or reflect settings
in AEL's User Preferences.


alm00291968 / IV37935
=====================
Short Description: GROUP NAMES LONGER THAN 64 CHARATERS CAUSE THE USER SYNC TO FAIL

Summary:
User synchronization fails if the assigned user is a member
of a group that has a name longer that 64 characters. It
will also fail if ncw_* roles are assigned to a group or a
group has a member group with a name longer than 64
characters. This is due to a object server group name
limitation of 64 characters.


alm00295717 / IV43485
=====================
Short Description: SQL PARSER IN WEBGUI ISSUE

Summary:
Parser is not handling SQL statement correctly


alm00296242 / IV44101
=====================
Short Description: SELECTING EVENTS FROM AEL AND ISSUING A CTRL-J DOESN'T ALWAYS
PRESENT THE JOURNAL DIALOGUE BOX

Summary:
When selecting alarms and issuing a CTRL-J to bring up the
dialogue box, on some occasions the dialogue box isn't
presented. Further investigation shows the dialogue box
isn't presented when the CTRL key is released before the J
key, if the J key is released first then the dialogue is
displayed.


alm00298064 / IV46849
=====================
Short Description: WEBGUI 7.4 WIRES NOT GETTING CREATED BETWEEN EVENTVIEWER AND AEL

Summary:
A step was missing in the procedure to set the Single-click
action field to Update Event List (using wires).


alm00299314 / IV49729
=====================
Short Description: CHANGES MADE BY "ROOT" VIA PREFERENCES ON AEL NOT SAVED
IN"ROOT.NOVA" FILE

Summary:
The changes made by "root" user via Preferences on AEL are
not reflected to "root.nova" file therefore not being saved.
The root user can click on Apply/Save buttons without any
error message as if the settings change was successful.
However, the nova file hasn't been changed and once AEL is
closed, the settings are gone, not all, but some items
remain unchanged.


alm00299796 / IV50239
=====================
Short Description: WAAPI RACE CONDITION CAUSING CORRUPTION OF FILTERS/VIEWS

Summary:
An error occurs when a large WAAPI script is run involving
the creation of filters and maps. The system filter.xml file
gets copied to the global view.xml


alm00300415 / IV50762
=====================
Short Description: FILTER DEFINITION IN USER FILTER ON THE USER PREFERENCES PAGE
SET TO A CERTAIN USER IS COPIED TO ANOTHER USER.

Summary:
When a new user is created, the filter definition in User
filter on the User Preferences page that was set to a
certain user is added to this new user too.


alm00300739 / IV51293
=====================
Short Description: AEL'S FILTER CHANGES TO FIRST AVAILABLE FILTER INSTEAD OF PROPER
SYSTEM FILTER

Summary:
Filters applied to AEL change to the first filter available in
the drop down menu


alm00301848 / IV52440
=====================
Short Description: FILTERS CREATED VIA WAAPI CREATEORREPLACEFILTER CANNOT BE USED
IN AEL

Summary:
Filters created using WAAPI are not being shown in the AEL.
When creating values using WAAPI, some values are created by
default if not specified. One of these values if not set in
the WAAPI command would default to null, so the AEL filter
would throw any error on initialization and default to the
Default filter.


alm00302494 / IV53409
=====================
Short Description: SYSTEM ERROR MESSAGE WHEN ATTEMPTING TO CREATE NEW FILTER OR
VIEW

Summary:
After restarting TIP, Filter Builder may work fine for some
time, but then at some stage creating a filter stops working.
An error message is observed ("System Error, contact Administrator")
when clicking on the New Filter button in the Filter page or
the New View button in the View page. At the same time the
OMNIbus WebGUI User Preferences page reports a NullPointerException.


alm00303216 / IV54049
=====================
Short Description: THE AEL IS SLOW TO LOAD FOR USERS WITH NCW_ADMIN ROLE IF THERE
ARE THOUSANDS OF SYSTEM FILTERS

Summary:
If there are thousands of system filters, the AEL can be
slow to load. This is because the system filter information
is downloaded from the server and used to populate the
filters dropdown in the AEL toolbar. This is in contrast to
the Event Viewer, where the portlet contains a checkbox to
show/not show system filters in the toolbar.


alm00303468 / IV54389
=====================
Short Description: SMARTPAGE COMMAND FOR AEL IS NOT ACCEPTING PARAMETER VIEW (VIEW
CAN BE NOT PRESELECTED)

Summary:
The "view" parameter of a an AEL smartpage command is not
applied. When the AEL monitor box is clicked, the default
view is applied rather than the specified view.


alm00303613 / IV54447
=====================
Short Description: ALL AELS EMBEDDED AS MONITOR BOXES CREATED USING SMARTPAGE
COMMANDS ARE NOT REFRESHED

Summary:
If multiple AELs are embedded in a Web GUI smartpage, only
the first AEL monitor box is ever automatically refreshed.
The other AEL monitor boxes show stale data and the entire
web page must be manually refreshed for the status to be
updated.


alm00303710 / IV54687
=====================
Short Description: UNINSTALL FUNCTIONALITY IS MISSING FROM WEB GUI FIXPACKS

Summary:


alm00304515 / IV55599
=====================
Short Description: WEBGUI 7.4 FP1 IS NOT PICKING UP UPDATED FILTER.XML
EVEN THOUGH TIMEDTASK PROPERTY IS ENABLED.

Summary:
WebGUI 7.4.0 FP1 was not picking up changes to the
filter.xml even though the timedtask property was enabled.


alm00305253 / IV56556
=====================
Short Description: WEB GUI DOES NOT UTILIZE OBJECTSERVER "ACTIVEPRIMARY" PROPERTY
TO DETERMINE IF FAILOVER/FAILBACK OCCURRED.

Summary:
Web GUI does not utilize ObjectServer "ActivePrimary"
property to determine whether a failover/failback has
occurred


alm002299582 / IV50029
=====================
Short Description: MISLEADING COMMENTING OF EVENTLIST.INFORMATION.FIELDS.SORT IN
SERVER.INIT

Summary:
The commenting of eventlist.information.fields.sort in
server.init is misleading


alm00307715 / IV60013
=====================
Short Description: BLIND SQL INJECTION

Summary:
Cross-Site Scripting issues on AEL and MAP
for attributes


alm0037827 / IV60138
=====================
Short Description: SECURITY APAR :WEBGUI IS AFFECTED BY
(CVE-2014-0094)(CVE-2014-0112)(CVE-2014-0113) APACHE STRUCTS

Summary:
CVE-2014-0114 reported that Apache Struts have ClassLoader
vulnerability which will enable attacker to execute code
remotely. Apache have issued announcement and suggested
mitigation action
[http://mail-archives.apache.org/mod_mbox/www-announce/20140
5.mbox/%3C53629980.8060805@apache.org%3E].


alm00273423 / IV24443
=====================
Short Description: AFTER APPLYING IV10531: USER LIST IN FILTER BUILDER EMPTY, NULL
USERNAMES BEING PASSED

Summary:
After applying IV10531, null usernames can still cause problems
with data display in Web GUI. Synchronisation will appear to
work, but the list of users to assign a new filter to in the
Filter Builder is empty.


alm00308744 / IV60972
=====================
Short Description: IA LOG REPORTS SUCCESS WHERE OMNIBUSWEBGUI.WAR HAS FAILED TO
DEPLOY

Summary:
When applying WebGUI 7.3.1.6 the IA log
reported a successful upgrade but when looking at the WebGUI
Welcome screen, it does not report proper version and no WebGUI
functionality works.


alm00308904 / IV61098
=====================
Short Description: FIRST AND LAST NAMES ARE NOT DISPLAYED CORRECTLY IN USER
LIST WHEN COMMA IS PRESENT

Summary:
When Administrator creates a new user on TIP GUI and includes
comma character in the first or last names, the names are
not displayed correctly in TIP user list. The user
repository used is ObjectServer


alm00309813 / IV61999
=====================
Short Description: WEB GUI 7.4FP2 REGRESSION: EVENTVIEWER.JSP URL DECODING OF QUERY
PARAMETERS DOES NOT CORRECTLY DECODE '+' CHARACTERS TO SPACES

Summary:
Event Viewer not able to handle input parameters with
space(s) in its value. The impacted parameters are
filterowner, filtername, viewname, sql and transientname.


alm00309552 / IV61742
=====================
Short Description: THREAD COUNT KEPT INCREASING WHEN WEBGUI FAILS TO CONNECT TO
FAILOVER OBJECTSERVER PAIR

Summary:
Datasource Failover keep starting new thread to create
connection with datasource even though there is existing
thread working on the connection creation. This issue only
happen on Datasource Failover configuration AND both primary
and backup datasource not reachable.


alm00312326 / IV65320
=====================
Short Description: HOVER HAND ICON DOES NOT SHOW WHEN PREVIEW MAPS WITH
ACTIVE BUTTON USING "EVENT VIEWER" AND "UPDATE WIRE" ACTION.

Summary:
Hover hand icon doesn't shown when preview Map's with active
button or monitor box using "Event Viewer" and "Update Wire"
action, other action working fine.

alm00311746 / IV64569
=====================
Short Description: EVENT DASHBOARD ERROR WHEN TRY TO DISPLAY FILTER FROM GROUP NAME WITH SPACE

Summary:


alm00311204 / IV63370
=====================
Short Description: SHOW/HIDE SYSTEM FILTER SHOULD BE CONSISTENT FOR ALL AEL

Summary:
Show/Hide system filters check box is not available in

- Event Dashboard (Personalize/Edit Shared Settings)
- Map object (Association tab)


alm00311213 / IV63411
=====================
Short Description: SYSTEM FILTER DIDN'T SHOW UP IN AEL DROP DOWN LIST IN SMARTPAGE

Summary:


alm00312198 / IV65075
=====================
Short Description: FILTER BUILDER BUTTONS MISSING IF USING IE11 (APAR=IV65075)

Summary:
Filter Builder buttons ("Save and Exit", "Save", "Cancel")
missing if using IE11

Prerequisites

This Fix Pack requires 7.4.0.0 GA release

Installation Instructions

IBM Tivoli Netcool/OMNIbus Web GUI 7.4.0 Fix Pack 3 Installation Instructions

===============================================================================

WebGUI 7.4.0.3 has been certified with TIP version 2.2.0.13 and 2.2.0.15.
TIP version 2.2.0.15 supports Java JRE 8, Mozilla Firefox 31 ESR and
Internet Explorer 11. It is recommended to upgrade to TIP version 2.2.0.15.

The most up-to-date information about supported hardware, software, browsers,
and operating systems is provided by the IBM® Software Product Compatibility
Reports at: http://pic.dhe.ibm.com/infocenter/prodguid/v1r0/clarity/index.html

This section shows how to install the Fix Pack 3 for IBM Tivoli Netcool/OMNIbus Web GUI 7.4.0
It is strongly recommend to perform a backup of TIP/Web GUI and COI/DE before
the installation of this fix pack. The steps for doing this are towards the end of this section.

The installation has the following stages:

1. Stop the Tivoli Integrated Portal and its associated services.
2. Extract the installation files from the archive.
3. Install the fix pack in silent mode.
4. Restart the Tivoli Integrated Portal server.

Note: See the end of this section for special instructions about how to apply fix packs in a load balancing environment.

Terminology:
These instructions use the following terms to refer to directories used during installation:
TIP_HOME Refers to the directory where the Tivoli Integrated Portal is installed.
This directory is known as the Tivoli Integrated Portal home directory.
Examples:
/opt/IBM/tivoli/tipv2 on UNIX environments.
C:\IBM\tivoli\tipv2 on Windows systems.

FP_dir Refers to the temporary directory where you extract the contents of the fix pack's archive.


1. Stop the Tivoli Integrated Portal and its associated services
----------------------------------------------------------------
Follow the instructions for your operating system.

Unix-based systems:

1. Log in as an administrator and stop the Tivoli Integrated Portal by entering the following command:

TIP_HOME/bin/stopServer.sh server1 -username <tipadmin> -password <tippass>

2. Wait for 30 seconds for the Tivoli Integrated Portal and its subprocesses to stop.


Windows systems:

1. Log in as a user with administrative privileges.

2. Open the Services control panel by clicking Start-->Control Panel-->
Administrative Tools-->Services.

3. Stop the service named Tivoli Integrated Portal - V2.2_TIPProfile_Port_16310.

4. Wait 30 seconds for the Tivoli Integrated Portal and its subprocesses to stop.

5. Close the Services control panel.


2. Extract the installation files
---------------------------------
Extract the installation files from their archives, ready to install on your system.

1. Extract all the files from the OMNIbus-v7.4.0-WebGUI-FP3-<platform> archive into a temporary directory (the FP_dir directory).

o The extension for the fix pack's archive is .tar or .zip, depending on the operating system.

o <platform> is a code for the operating system of the machine where you are installing the fix pack.

o On Unix-based systems, use GTAR to extract the archives to avoid any long link problems.

2. Navigate to FP_dir.


3. Install the fix pack in silent mode
--------------------------------------

1. Use sample_response.txt to create a response file. Set up the responses in that file appropriate for your system.

Note that IAGLOBAL_UPDI_HOME_23 variable in response file is commented out.
DO NOT uncomment the IAGLOBAL_UPDI_HOME_17 variable and adjust the path UNLESS the installed version of UPDI is 7.0.0.17.

2. Please backup existing version before installing fix pack.

3. Run the installer for the fix pack in silent mode. Use the appropriate command for your operating system:

Unix-based systems:
./install.sh [-i|-I] <full_path_JRE> <response file>

Optional parameter -i or -I can be used for interactive mode installation. This gives an opportunity to the administrator to verify the values of the variables configured in the response file
Replace <response file> with the name of the response file you created in step 1.
<full_path_JRE> refers to such as /opt/Java/jre (up to but not including the bin directory)
Only IBM JRE 1.6 is supported. A JRE 1.6 that can be used for the Fix Pack installation is in : <TIP_HOME>/java/jre

Windows systems:

install.bat [-i|-I] <full_path_JRE> <response file>

Optional parameter -i or -I can be used for interactive mode installation. This gives an opportunity to the administrator to verify the values of the variables configured in the response file
Replace <response file> with the name of the response file you created in step 1.
<full_path_JRE> refers to such as C:\Java\jre (up to but not including the bin directory)
Only IBM JRE 1.6 is supported.
A JRE 1.6 that can be used for the Fix Pack installation is in: <TIP_HOME>\java\jre


4. Restart the Tivoli Integrated Portal server
----------------------------------------------
When the installation is complete restart the Tivoli Integrated Portal server.


Instructions for installing IBM Tivoli Netcool/OMNIbus Web GUI 7.4.0 FP3 in load balancing environment
==========================================================================================================

1. Disjoin the first node from current load balancing environment, use the disjoin option :
a. Remove the node. For more information about how to do this, see
http://publib.boulder.ibm.com/infocenter/tivihelp/v8r1/topic/com.ibm.netcool_OMNIbus.doc_7.4.0/tip/ttip_config_ha_unjoin.html To restore the removed node to normal operation, restart the server.
b. Remove the load balancing information of the node from the configuration database from the cluster. For more information about how to do this, see http://publib.boulder.ibm.com/infocenter/tivihelp/v8r1/topic/com.ibm.netcool_OMNIbus.doc_7.4.0/webtop/wip/task/web_adm_loadbalpreventnode.html
Important: After the first node is disjoined, avoid making any changes to the load balancing environment other than the steps in these instructions.

2. Install the fix pack on the disjoined first node

3. Verify that the patched, disjoined node is working as expected.

4. Disjoin one of the remaining nodes from current load balancing environment :
a. Remove the node. For more information about how to do this, see
http://publib.boulder.ibm.com/infocenter/tivihelp/v8r1/topic/com.ibm.netcool_OMNIbus.doc_7.4.0/tip/ttip_config_ha_unjoin.html To restore the removed node to normal operation, restart the server.
b. Remove the load balancing information of the node from the configuration database from the cluster. For more information about how to do this, see http://publib.boulder.ibm.com/infocenter/tivihelp/v8r1/topic/com.ibm.netcool_OMNIbus.doc_7.4.0/webtop/wip/task/web_adm_loadbalpreventnode.html

5. Repeat step 4 for each node in the load balancing environment until no nodes remain.
Important: use the uninstall option for the last node

6. Rejoin the patched first node to the load balancing environment, use the configHA option:
a. Join the node to the cluster. For more information about how to do this, see http://publib.boulder.ibm.com/infocenter/tivihelp/v8r1/topic/com.ibm.netcool_OMNIbus.doc_7.4.0/tip/ttip_config_ha_join.html
b. Start load balancing operations on the node. For more information about how to do this, see http://publib.boulder.ibm.com/infocenter/tivihelp/v8r1/topic/com.ibm.netcool_OMNIbus.doc_7.4.0/webtop/wip/task/web_adm_loadbalconfigurenewnode.html

7. Install the fix pack on one of the disjoined nodes.

8. Verify that the patched, disjoined node is working as expected.

9. Rejoin the upgraded node to the load balancing environment, use the join option:
a. Join the node to the cluster. For more information about how to do this, see http://publib.boulder.ibm.com/infocenter/tivihelp/v8r1/topic/com.ibm.netcool_OMNIbus.doc_7.4.0/tip/ttip_config_ha_join.html
b. Start load balancing operations on the node. For more information about how to do this, see http://publib.boulder.ibm.com/infocenter/tivihelp/v8r1/topic/com.ibm.netcool_OMNIbus.doc_7.4.0/webtop/wip/task/web_adm_loadbalconfigurenewnode.html

10. Repeat steps 7 to 9 for each node that was disjoined from the load balancing environment.

Important: To avoid long downtime periods, ensure the first node is patched and ready to rejoin to the load balancing environment before the final node is disjoined.



Recommended backup procedure for an existing 7.4.0 install (pre-FP3)
==========================================================================================================

Important: The paths referenced in these steps are for a default install. Ensure the correct paths are used for the Web GUI instance being backed-up.

1. Ensure that all users are logged out of the Web GUI.
2. Stop the server.
3. Back up the existing installation:

For UNIX operating system
Use tar or a similar archiving tool to create backup copies of the following directories:
Table 1. Directories to back up on UNIX and Linux
Directory Backup filename

/opt/IBM/tivoli/netcoool/omnibus_webgui webgui.tar
/opt/IBM/tivoli/tipv2 tipv2.tar
/opt/IBM/tivoli/tipv2Components tipv2Components.tar

For Windows operating system
Use a suitable archive utility to create .zip files of the following folders and all their subfolders in the specified file:

Table 2. Directories to back up on Windows
Directory Backup filename
C:\IBM\tivoli\netcool\omnibus_webgui webgui.zip
C:\IBM\tivoli\tipv2 tipv2.zip
C:\IBM\tivoli\tipv2Components tipv2Components.zip

For example, the following command backs up the omnibus_webgui directory on Linux. Use a similar command for the other directories.
tar -cvf webgui.tar /opt/IBM/tivoli/netcool/omnibus_webgui

4.Back up the Deployment Engine (DE):

Follow backup instructions documented in the following link:

http://publib.boulder.ibm.com/infocenter/tivihelp/v8r1/topic/com.ibm.netcool_OMNIbus.doc_7.4.0/omnibus/wip/admin/task/omn_adm_backupde.html


Restoring a Web GUI install to pre-fix pack state
==========================================================================================================

If the upgrade to 7.4.0.3 fails, you can restore your backed-up 7.4.0.0 instance.


1. Stop the Tivoli Integrated Portal server.

2. Restore the DE.
Follow the instructions documented in the following link:

http://publib.boulder.ibm.com/infocenter/tivihelp/v8r1/topic/com.ibm.netcool_OMNIbus.doc_7.4.0/omnibus/wip/admin/task/omn_adm_restorede.html

3. Rename the Web GUI and Tivoli Integrated Portal directories as follows:
Example :
On UNIX and Linux,

mv /opt/IBM/tivoli/netcoool/omnibus_webgui /opt/IBM/tivoli/netcoool/omnibus_webgui.old

mv /opt/IBM/tivoli/tipv2 /opt/IBM/tivoli/tipv2.old

mv /opt/IBM/tivoli/tipv2Components /opt/IBM/tivoli/tipv2Components.old

On Windows,

rename C:\IBM\tivoli\netcool\omnibus_webgui C:\IBM\tivoli\netcool\omnibus_webgui.old

rename C:\IBM\tivoli\tipv2 C:\IBM\tivoli\tipv2.old

rename C:\IBM\tivoli\tipv2Components C:\IBM\tivoli\tipv2Components .old

4.Restore the content of the following files to their original locations by using a suitable archive utility to restore the content of the following files to their original locations:
On UNIX and Linux
webgui.tar
tipv2.tar
tipv2Components.tar
On Windows
webgui.zip
tipv2.zip
tipv2Components.zip

5.Start the Tivoli Integrated Portal server.

Download package

Download RELEASE DATE LANGUAGE SIZE(Bytes) Download Options
What is Fix Central (FC)?
7.4.0-TIV-NCOMNIbus-AIX-FP0003 26 Nov 2014 English 259684352 FC
7.4.0-TIV-NCOMNIbus-HPUXIA-FP0003 26 Nov 2014 English 259684352 FC
7.4.0-TIV-NCOMNIbus-Linux-FP0003 26 Nov 2014 English 267277824 FC
7.4.0-TIV-NCOMNIbus-ZLinux-FP0003 26 Nov 2014 English 259684352 FC
7.4.0-TIV-NCOMNIbus-Windows-FP0003 26 Nov 2014 English 259678945 FC
7.4.0-TIV-NCOMNIbus-Solaris-FP0003 26 Nov 2014 English 259684352 FC

Product Alias/Synonym

OMNIbus_GUI 7.4.0
OMNIbus_GUI 7.4.0 FP0001
OMNIbus_GUI 7.4.0 FP0002
OMNIbus_GUI 7.4.0 FP0003
OMNIbus_GUI 7.4.0 Fix Pack 1
OMNIbus_GUI 7.4.0 Fix Pack 2
OMNIbus_GUI 7.4.0 Fix Pack 3
OMNIbus_GUI 7.4.0.1
OMNIbus_GUI 7.4.0.2
OMNIbus_GUI 7.4.0.3
7.4.0
7.4.0.1
7.4.0.2
7.4.0.3
Web GUI 7.4.0
Web GUI 7.4.0.1
Web GUI 7.4.0.2
Web GUI 7.4.0.3
Web GUI 7.4.0 Fix Pack 1
Web GUI 7.4.0 Fix Pack 2
Web GUI 7.4.0 Fix Pack 3
Web GUI 7.4.0 FP0001
Web GUI 7.4.0 FP0002
Web GUI 7.4.0 FP0003

Problems (APARS) fixed
IV04057, IV32343, IV37935, IV43485, IV44101, IV46849, IV49729, IV50239, IV50762, IV51293, IV52440, IV53409, IV54049, IV54389, IV54447, IV54687, IV55599, IV56556, IV50029, IV60013, IV60138, IV24443, IV60972, IV61098, IV61999, IV61742, IV65320, IV64569, IV63370, IV63411, IV65075, IV44975, IV45877, IV44888, IV02345, IV07139, IV11908, IV17554, IV18283, IV18989, IV21738, IV24448, IV25275, IV27598, IV29523, IV29912, IV29953, IV30581, IV30590, IV30843, IV32010, IV33725, IV33941, IV34047, IV35829, IV35948, IV36156, IV36422, IV36664, IV37132, IV37352, IV38055, IV38415, IV38538, IV38652, IV38675, IV42080, IZ62585, IZ91400, IZ92244, IZ97947, IV37092, IV39543, IV42702, IV39803, IV42207, IV42208, IV34308, IV34885, IV35444, IV36540, IV33868, IV45878, IV45831, IV46102, IV37645, IV49569, IV49601, IV49555, IV49393, IV48126, IV47893, IV47579, IV46843, IV46771, IV46096, IV42916, IV44079, IV49605, IV11719, IV47772, IV50499, IZ85487, IV50207, IV51526, IV51181, IV47304, IV47180, IV43813, IV53418, IV53420, IV53517, IV53411, IV52633, IV52533, IV54955, IV52587, IV51878, IV52572, IV49396, IV48847, IV50898, IV43817, IV49936, IV50273, IV50662, IV50646

Rate this page:

(0 users)Average rating

Document information


More support for:

Tivoli Netcool/OMNIbus
Web GUI

Software version:

7.4.0

Operating system(s):

AIX, HP-UX, HP-UX on Itanium, Linux, Linux zSeries, Solaris, Windows

Reference #:

4037201

Modified date:

2014-11-26

Translate my page

Machine Translation

Content navigation