cfgsvc command on VIOS 2.2.0.12-FP-24 SP-02 or VIOS 2.2.0.13-FP-24 SP03 fails

Flash (Alert)


Abstract

When the CEC Base agent or the VIOS Premium agent is configured using the cfgsvc command on VIOS 2.2.0.12-FP-24 SP-02 or VIOS 2.2.0.13-FP24 SP03, the command fails.

Content

When the CEC Base agent or the VIOS Premium agent is configured using the cfgsvc command on VIOS 2.2.0.12-FP-24 SP-02 or VIOS 2.2.0.13-FP24 SP03, the command fails with the following error message:

---------------------------------------------------------------------------------------------------------------
"Find HMC IP with lsrsrc" was last subcommand run.
Command did not complete.  

---------------------------------------------------------------------------------------------------------------

The problem occurs on the VIOS 2.2.0.12-FP-24 SP-02 and VIOS 2.2.0.13-FP24 SP03 versions. Versions of VIOS prior to version 2.2.0.12-FP-24 SP-02 are not affected. APAR IV01286 was opened to address this issue. The details can be found here:
https://www-304.ibm.com/support/docview.wss?uid=isg1IV01286

To obtain details of the fix for the above APAR, VIOS Support should be contacted. To be able to configure the VIOS agent, the only fix required is the fix for APAR IV01286. An ITM fix is not required. However, for the CEC agent running on VIOS, a fix for an associated APAR: IV03965 is required if HMC failover is used.

Initially APAR IV01177 was opened from the ITM side for the same issue. Since it is a duplicate of IV01286, it has since been cancelled.

NOTE: The VIOS versions that are affected are:

- 2.2.0.12 FP24 SP02 and

- 2.2.0.13-FP24 SP03

The version was reported incorrectly in a previous flash.

Rate this page:

(0 users)Average rating

Document information


More support for:

Tivoli Monitoring Version 6
ITM Agent System P V6

Software version:

6.2.2

Operating system(s):

AIX

Reference #:

1501447

Modified date:

2014-04-28

Translate my page

Machine Translation

Content navigation