TSO command server Installation Verification test fails with RC 1004 EIBMIUCVERR IUCV error with WDz and RDz

SECACPT=NONE has been specified in the APPL definition for the LU against which this APPC transaction FEKFRSRV was going to run.

Possible options are NONE, CONV, or ALREADYV.

NONE means no password is needed.
CONV indicates password is required.
ALREADYV indicates a password is required or if the password has already been verified and the already-verified bit is acceptable.
Both CONV and ALREADYV will require a conversation level password.

When running the fekfscmd from OMVS/USS to verify the configuration for the TSO command server, the following result is seen:

./fekfscmd: version=Oct 2003              
Input parms: 1.2.3.4 * notrace haimo ******
APPC: Allocate succeeded                  
Conversation id is 121BE3F80000011B      
APPC: Set Send Type succeeded              
APPC: Confirm succeeded                    
Req to send recd value is  0              
APPC: SEND_DATA return_code = 0            
request_to_send_received =  0            
 Send Data succeeded                      
APPC: Set Prepare to Receive type succeeded
APPC: Prepare to Receive succeeded        
APPC: Receive data                        
RCV return_code = 0                      
RCV data_received= 2                      
RCV received_length= 57                  
RCV status_received= 4                    
RCV req_to_send= 0                        
Receive succeeded                        
:IP: 8 INITIALIZATION FAILED: 1004 EIBMIUCVERR IUCV error          
APPC: CONFIRMED succeeded

and this error was in the OPERLOG:

I CH408I JOB(FEKFRSRV) STEP(IKJACCNT) CL(PROCESS )
 OMVS SEGMENT NOT DEFINED


from the top of the FEKFRSRV output on the spool:


IKJ56644I NO VALID TSO USERID, DEFAULT USER ATTRIBUTES USED

and in the user id column in sdsf, you will no owner listed but instead this entry:

++++++++

Specify SECACPT=CONV or SECACPT=ALREADYV.