IBM Support What's New?

PM91190: Service for Debug Tool 12.1.

A fix is available

Subscribe

You can track all active APARs for this component.

APAR status

  • Closed as program error.

Error description

  • --- Service ---
    
    -ABENDS01F-04 abend when user handler is present.
     ABENDS0C4 at ICEEXIT+5C60.
     ABENDS0C4 EQA00CEM+B88 in $CeeQLod Procedure.
     (PM92401 at 12.1)
    
    -Program check EQA00STT+x'20DA'.
     (PM86208 at 12.1)
    
    -PROGxxx errors or invalid Monitor output due to bad DT 3270
     buffers when displaying DBCS characters in MONITOR or SOURCE
     windows.
     (PM87793 at 11.1)
    
    -Abend in IGZIZQR +000000AE when expanding complex structure
     with SET LIST BY SUBSCRIPT; SET AUTOMONITOR ON CURRENT;
     (PM89110 at 12.1)
    
    -In an IMS system that does not use a standardized Sign On, the
     EQASET subparameter TSOID= does not work.
     (PM90332 at 10.1)
    
    -CICS: Storage leak below if SAVEBPS member does not exists.
     User has SET RESTORE BPS AUTO but not SET SAVE BPS AUTO.
     (PM91128 at 12.1)
    
    -Squared bracket in C broken for L or LIST().
     (PM92209 at 12.1)
    
    -In Debug Tool Utilities option
     'C  IMS Transaction and User ID Cross Reference Table', the
     CREATE transaction ID command is not allowing a transaction ID
     name with a Z in it.
     (PM92281 at 12.1)
    
    -Debug Tool Code Coverage:
     When the merged observations (rollup) have at least one debug
     override = 'Y', show 'Y'. For example, 4 observations are
     merged, the debug override rollup option is Yes,
     N+N+N+N, should show 'N',
     N+Y+N+N, should show 'Y'.
    
    -Debug Tool Code Coverage:
     Show the information in an observation table entry at the top
     of the Presentation report.
    
    -The Debug Tool Language Environment User Exit pattern match
     routine gets a blank user exit data set name.
    
    -Debug Tool Code Coverage:
     Better error checking for source marker fields in Observation
     selection criteria panel.
    
    -Debug Tool Code Coverage:
     Report can get ABENDS0C7 in EQADBFIL when OPT COBOL compiler
     option used.
    
    -Debug Tool Code Coverage:
     Improve handling of errors in Observation extraction and
     Report generation.
    
    --- End Service ---
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED: Debug Tool 12.1 users who have the problems  *
    *                 described in the Problem Description.        *
    ****************************************************************
    * PROBLEM DESCRIPTION: -ABENDS01F-04 abend when user handler   *
    *                       is present.                            *
    *                       ABENDS0C4 at ICEEXIT+5C60.             *
    *                       ABENDS0C4 EQA00CEM+B88 in $CeeQLod     *
    *                       Procedure.                             *
    *                       (PM92401 at 12.1)                      *
    *                                                              *
    *                      -Program check EQA00STT+x'20DA'.        *
    *                       (PM86208 at 12.1)                      *
    *                                                              *
    *                      -PROGxxx errors or invalid Monitor      *
    *                       output due to bad DT 3270 buffers      *
    *                       when displaying DBCS characters in     *
    *                       MONITOR or SOURCE windows.             *
    *                       (PM87793 at 11.1)                      *
    *                                                              *
    *                      -Abend in IGZIZQR +000000AE when        *
    *                       expanding complex structure with SET   *
    *                       LIST BY SUBSCRIPT; SET AUTOMONITOR ON  *
    *                       CURRENT;                               *
    *                       (PM89110 at 12.1)                      *
    *                                                              *
    *                      -In an IMS system that does not use a   *
    *                       standardized Sign On, the EQASET       *
    *                       subparameter TSOID= does not work.     *
    *                       (PM90332 at 10.1)                      *
    *                                                              *
    *                      -CICS: Storage leak below if SAVEBPS    *
    *                       member does not exists.  User has SET  *
    *                       RESTORE BPS AUTO but not SET SAVE BPS  *
    *                       AUTO.                                  *
    *                       (PM91128 at 12.1)                      *
    *                                                              *
    *                      -Squared bracket in C broken for L or   *
    *                       LIST().                                *
    *                       (PM92209 at 12.1)                      *
    *                                                              *
    *                      -In Debug Tool Utilities option 'C      *
    *                       IMS Transaction and User ID Cross      *
    *                       Reference Table', the CREATE           *
    *                       transaction ID command is not          *
    *                       allowing a transaction ID name with a  *
    *                       Z in it.                               *
    *                       (PM92281 at 12.1)                      *
    *                                                              *
    *                      -Debug Tool Code Coverage:              *
    *                       When the merged observations (rollup)  *
    *                       have at least one debug override =     *
    *                       'Y', show 'Y'. For example, 4          *
    *                       observations are merged, the debug     *
    *                       override rollup option is Yes,         *
    *                       N+N+N+N, should show 'N',              *
    *                       N+Y+N+N, should show 'Y'.              *
    *                                                              *
    *                      -Debug Tool Code Coverage:              *
    *                       Show the information in an             *
    *                       observation table entry at the top of  *
    *                       the Presentation report.               *
    *                                                              *
    *                      -The Debug Tool Language Environment    *
    *                       User Exit pattern match routine gets   *
    *                       a blank user exit data set name.       *
    *                                                              *
    *                      -Debug Tool Code Coverage:              *
    *                       Better error checking for source       *
    *                       marker fields in Observation           *
    *                       selection criteria panel.              *
    *                                                              *
    *                      -Debug Tool Code Coverage:              *
    *                       Report can get ABENDS0C7 in EQADBFIL   *
    *                       when OPT COBOL compiler option used.   *
    *                                                              *
    *                      -Debug Tool Code Coverage:              *
    *                       Improve handling of errors in          *
    *                       Observation extraction and Report      *
    *                       generation.                            *
    *                                                              *
    *                      --- End Service ---                     *
    ****************************************************************
    * RECOMMENDATION: Installations that need problem fixes        *
    *                 should install this service.                 *
    ****************************************************************
    Miscellaneous service.
    

Problem conclusion

  • Service available.
    

Temporary fix

Comments

APAR Information

  • APAR number

    PM91190

  • Reported component name

    DEBUG TOOL Z/OS

  • Reported component ID

    5655W7000

  • Reported release

    C10

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2013-06-17

  • Closed date

    2013-07-24

  • Last modified date

    2013-08-02

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UK96097

Modules/Macros

  • EQA00A64 EQA00ABE EQA00AEH EQA00AEI EQA00ALO EQA00ANC EQA00ANL
    EQA00BKP EQA00BLD EQA00BLK EQA00BND EQA00B
    
    ***This field was truncated.  To obtain the full apar record, please contact your local support center.***
    

Fix information

  • Fixed component name

    DEBUG TOOL Z/OS

  • Fixed component ID

    5655W7000

Applicable component levels

  • RC10 PSY UK96097

       UP13/07/25 P F307

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.



Document information

More support for: Debug Tool for z/OS

Software version: C10

Reference #: PM91190

Modified date: 2013-08-02