PM65459: CM Z/OS 8.4.3 LIBRARY SERVER FIX PACK 3 ROLL-UP PTF

Obtain the fix for this APAR.

APAR status

• Closed as program error.

Error description

• APAR for CM z/OS 8.4.3 Library Server fix pack 3 roll-up PTF
  
  Additional Keywords:
  LS
  fp3
  fixpak
  fixpack
  

Local fix

• N/A
  

Problem summary

• ****************************************************************
  * USERS AFFECTED: Users of IBM(R) Content Manager for z/OS(R)  *
  *                 V8.4.3 library server                        *
  ****************************************************************
  * PROBLEM DESCRIPTION: This PTF is a roll-up of several        *
  *                      IBM(R) Content Manager for z/OS V8.4.3  *
  *                      library server APARs that have been     *
  *                      reported since the release of the       *
  *                      Fix Pack 2 PTF for that product         *
  *                      (UK78469). This roll-up PTF will be     *
  *                      referenced in documentation as the      *
  *                      "IBM(R) Content Manager for z/OS        *
  *                      V8.4.3 library server Fix Pack 3 PTF".  *
  *                                                              *
  *                      The included APARs are:                 *
  *                                                              *
  *                      APAR #  Description                     *
  *                      ------- ------------------------------- *
  *                      IO16509 When you run a query or search  *
  *                              in WEBi, the following error is *
  *                              displayed: LS RC 7015 with      *
  *                              ExtRc = -198, -10 or -104.      *
  *                      IO16263 If a sub-process is shared by   *
  *                              more than one process, the      *
  *                              deletion of one of the          *
  *                              processes corrupts the other    *
  *                              processes.                      *
  *                                                              *
  ****************************************************************
  * RECOMMENDATION: APPLY CORRECTIVE SERVICE                     *
  ****************************************************************
  This is a roll-up PTF. See Problem Description for the list of
  included APARs.
  

Problem conclusion

• This is a roll-up PTF.  Refer to the Problem Description section
  for more detail.
  
  HOLD (DOC)
  ----------------------------------------------------------------
  
  Also see the  "IBM Content Manager Version 8 Release 4
  Modification 3 Fix Pack 3 readme" at
  http://publib.boulder.ibm.com/infocenter/cmgmt/v8r4m0/-->
  -->topic/com.ibm.cmgmt843fpreadme.doc/fp3/about.htm
  for further information.
  
  HOLD (DOC)
  ----------------------------------------------------------------
  
  Also see "System requirements: Hardware and software
  requirements for IBM Content Manager for z/OS Version 8.4.3 Fix
  Pack 3" at
  http://www.ibm.com/support/docview.wss?uid=swg27036383
  for further information.
  
  HOLD (DOC)
  ----------------------------------------------------------------
  
  Also see "Fix list for IBM Content Manager Version 8.4.3 at
  http://www.ibm.com/support/docview.wss?uid=swg27021609
  for further information.
  
  HOLD (ACT)
  ----------------------------------------------------------------
  
  You can use the IBM(R) Content Manager for z/OS Job
  configuration tool to upgrade to V8.4.3 Fix Pack 3.
  
  If your product level, before upgrade, is at the V8.4.3 GA
  level, you must select the 'Fix pack upgrade only' panel
  (panel ID: ICMMFPLV) to customize your upgrade jobs.  Enter 0
  in the 'Fix pack number before the upgrade' field and 3 in the
  'Fix pack number after the upgrade' field.
  
  If your product level, before upgrade, is not at the V8.4.3 GA
  level, you must select the 'Version, release, modification, and
  fix pack upgrade' panel (panel ID: ICMMUPLV) to customize your
  upgrade jobs.  The tool will upgrade your system to the most
  current fix pack level of V8.4.3, even though the panel label
  reads 'upgrade to V8.4.3'. The minimum product level is V8.4
  or above for upgrading to V8.4.3 FP2.
  
  HOLD (ACT)
  ----------------------------------------------------------------
  
  If you are using the IBM(R) Content Manager for z/OS High
  Volume Batch Load Utility, you must run the following jobs
  after you install this PTF:
  
    1.   Run ICMMBLB1 to rebind the DB2 plan for ICMPBL02.
    2.   Run ICMMBLG1 and ICMMBLG2 (or ICMMBLG3 if the library
         server and resource manager OAM are in different DB2
         subsystems) to rebuild all the batch load programs.
  
  
  HOLD (ACT)
  ----------------------------------------------------------------
  
  For newly-installed IBM(R) Content Manager for z/OS V8.4.3
  library servers, customize and run the ICMMLSCR, ICMMLSLD,
  ICMMLSBD, ICMMLSGT, and ICMMCACL post-installation jobs at the
  latest level to create a library server database, as described
  in the Planning and Installing Your Content Management System
  for z/OS guide. After you run the jobs, your library server
  will be at the base level and will require an upgrade to Fix
  Pack 3.
  
  To upgrade an existing IBM(R) Content Manager for z/OS library
  server to the IBM(R) Content Manager for z/OS V8.4.3 Fix Pack 3
  level, perform the following steps:
  
       1. Run the applicable steps of the ICMMLSUP library server
          database upgrade job, as documented in the comments
          within ICMMLSUP.
  
       2. Run the ICMMLSBD library server bind job again.
  
       3. Run the ICMMLSGT library server grant job again.
  
       4. From a command prompt on the computer from which you
          run the Content Manager system administration client,
          run cmcfglsi -t comptypes again. (Note - if you have
          already installed Content Manager for z/OS v8.4.3
          Toolkit Fix Pack 3, you may run the command from a
          Unix System Services shell under z/OS instead.)
  
  
  HOLD (ACT)
  ----------------------------------------------------------------
  
  The following customizable JCL and data members are modified by
  this PTF. If you have modified the originals, you might want to
  compare them to the new versions:
  
  ICMMBIND - Updated the 'VALIDATE' keyword value
  ICMMCACL - Added a reminder comment to keep some DD in the
             'PERM' step.
  ICMMCO   - Updated list of exit names and their descriptions
             in the commnents area.
  ICMMHLLX - Updated the INCLUDE statement for ICMXLSLG
  ICMMLSCR - Added comment, sample, and ref for Data Encryption
             Added default value for ACLTYPE.
  ICMMLSLD - Set current version to Fix Pack 3.
             Added comment about deadlock prevention.
             Added comment, sample, and ref for Data Encryption
  ICMMLSUP - Set current version to Fix Pack 3.
             Added comment, sample, and ref for Data Encryption
             Added note about expected conds: adding indexes
             that already exist, or dropping some that do not.
  ICMMLXLJ - Updated list of exit names and their descriptions
             in the commnents area.
  ICMMLXLK - Removed refs to SMP/E.
             Replaced token ?SMP? with ?ICM?.
             Updated DD for object library,
  
  ICMRMQRY - Updated comment about cm83 with CM8.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

  UK83107

Modules/Macros

•    ICMMBIND ICMMCACL ICMMCO   ICMMHLLX ICMMLSCR
  ICMMLSLD ICMMLSUP ICMMLXLJ ICMMLXLK ICMPBL01 ICMPBL04 ICMPCOF4
  ICMPDRAC ICMPDRAI ICMPDRAL ICMPDREP ICMPDRGR ICMPDRGW ICMPDRIT
  ICMPDRLA ICMPDRLL ICMPDRLW ICMPDRSP ICMPDRUP ICMPDRVS ICMPIID2
  ICMPLSAC ICMPLSAL ICMPLSAN ICMPLSAP ICMPLSAR ICMPLSAT ICMPLSAU
  ICMPLSBC ICMPLSBV ICMPLSB2 ICMPLSCA ICMPLSCI ICMPLSCL ICMPLSCN
  ICMPLSCO ICMPLSCP ICMPLSCV ICMPLSCW ICMPLSC1 ICMPLSC2 ICMPLSDA
  ICMPLSDD ICMPLSDE ICMPLSDI ICMPLSDL ICMPLSDM ICMPLSDP ICMPLSDR
  ICMPLSD2 ICMPLSGA ICMPLSGD ICMPLSGI ICMPLSGK ICMPLSGL ICMPLSGP
  ICMPLSGR ICMPLSGT ICMPLSGU ICMPLSIG ICMPLSIP ICMPLSIR ICMPLSIT
  ICMPLSIV ICMPLSIX ICMPLSI2 ICMPLSKM ICMPLSKY ICMPLSLA ICMPLSLB
  ICMPLSLC ICMPLSLD ICMPLSLE ICMPLSLF ICMPLSLG ICMPLSLI ICMPLSLK
  ICMPLSLL ICMPLSLM ICMPLSLN ICMPLSLP ICMPLSLR ICMPLSLS ICMPLSLU
  ICMPLSLV ICMPLSLX ICMPLSMA ICMPLSMM ICMPLSMT ICMPLSPG ICMPLSPI
  ICMPLSPP ICMPLSPR ICMPLSPS ICMPLSPT ICMPLSP1 ICMPLSP2 ICMPLSP3
  ICMPLSP4 ICMPLSP5 ICMPLSQU ICMPLSRC ICMPLSRD ICMPLSRI ICMPLSRM
  ICMPLSRR ICMPLSR2 ICMPLSSA ICMPLSSC ICMPLSSL ICMPLSS2 ICMPLSTI
  ICMPLSTT ICMPLSUD ICMPLSUG ICMPLSUL ICMPLSUO ICMPLSUR ICMPLSUS
  ICMPLSUU ICMPLSU1 ICMPLSU2 ICMPLSU8 ICMPLSVA ICMPLSVW ICMPLSWE
  ICMPLSW2 ICMPLSXO ICMRMQRY ICMXBAU  ICMXDRUE ICMXENT  ICMXLEA
  ICMXOVE
  

Fix information

• Fixed component name

  CM390 LIB SER R

• Fixed component ID

  5697H6000

Applicable component levels

• R84P PSY UK83107

     UP12/11/14 P F211

Fix is available

• Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.