A fix is available
APAR status
Closed as program error.
Error description
Abend ASRA (s0c1) in EQADCCNM csect EQADCCN1 after applying UK60766. DTCN users who have profiles in a VSAM repository saved prior to the install of UK60766 may receive an Abend0C1 ASRA due to changes in the offset of a field within the VSAM record. Users who have applied UK60766 (now PE) and created DTCN VSAM profiles may see DTCN abends with this fix. If they do, they should use the DTCD transaction to delete the incorrect profile.
Local fix
Use the DTCD transaction to delete the incorrect profile.
Problem summary
**************************************************************** * USERS AFFECTED: Debug Tool 10.1 users who use a CICS DTCN * * VSAM repository and who installed UK60766 * * * * or * * * * who need the fixes in UK60766 or UK60814. * **************************************************************** * PROBLEM DESCRIPTION: Abend ASRA (s0c1) in EQADCCNM csect * * EQADCCN1 after applying UK60766. DTCN * * users who have profiles in a VSAM * * repository saved prior to the install * * of UK60766 may receive an Abend0C1 * * ASRA due to changes in the offset of a * * field within the VSAM record. * * * * Users who have applied UK60766 (now * * PE) and created DTCN VSAM profiles may * * see DTCN abends with this fix. If they * * do, they should use the DTCD * * transaction to delete the incorrect * * profile. * * * * This PTF will contain all the service * * for PM17328/UK60766 and PM23045/UK60814 * * plus this fix. * * * * * * PM17328 / UK60766: * * * * --- Features --- * * * * -Debug Tool now supports debugging of * * assembler programs that exploit the * * latest IBM zEnterprise 196 * * architecture. In addition, new Debug * * Tool variables, %GPRH0, %GPRH1, ... * * %GPRH15, are now available to * * reference the high, 32-bit registers. * * See the +HOLD for more information. * * * * -Debugger support for the new * * Enterprise PL/I 4.1 compiler, * * including the new GONUMBER(SEPARATE) * * compiler option. Support for * * GONUMBER(SEPARATE) also requires a new * * Language Environment runtime PTF for * * APAR PM19445. See the ++HOLD for more * * information. * * * * -Coverage Utiity support for the new * * Enterprise PL/I 4.1 compiler. * * * * -Load Module Analyzer: Add SS * * (seconds) to LEINFO compile time. * * * * -Listing PL/1 array enhancements. * * Display single occurrence and display * * array as it is stored in memory. See * * the +HOLD for more information. * * (PM21186 at 10.1) * * * * -The EQALMA LEINFO option now generates * * non-LE compile date and time * * information for OS/VS COBOL and VS * * COBOL II in addition to the LE * * information for all LE enabled * * languages. * * * * -The Debug Tool internal heap limit for * * expression processing has been * * increased to 250M, allowing larger * * data items to be processed. See the * * ++HOLD for information about changes * * to the Explanation and Programmer * * response for EQA1484E. * * * * -Update the Enterprise PL/I IVPs for * * Enterprise PL/I 4.1. * * * * --- End Features --- * * * * --- Service --- * * * * -ABENDS0C1 in EQA00STO+x'000000E8' * * expanding a C variable from RD/z. * * (PM16663 at 9.1) * * * * -Host session hangs with PROG755 * * monitoring DBCS variable with bad * * data. No error occurs with SET DBCS * * OFF. * * (PM17597 at 9.1) * * * * -User opens a COBOL table. Its index * * number is displayed incorrectly. This * * fails on RDz 7.0.1.1, not 7.0.1.4. * * (PM17732 at 10.1) * * * * -DTSU COPY drops the DUMMY keyword from * * DD statement. * * (PM17984 at 9.1) * * * * -Dynamic Table Manager not compatible * * with CEEBINIT that is linked with * * EQADICXT. * * (PM18400 at 10.1) * * * * -Unable to debug assembler if called * * from LE cobol with CEETEST. * * * * Customer has a main program XXXX which * * call the exit XXX@S01, where a CEETEST * * call is issued and the session for * * debugging is established. After going * * back to the main program XXXX, XXXX * * calls the program which they want to * * debug. Here, they can debug a COBOL * * program with this method. However they * * can not debug an assembler program. * * The session for debugging is * * disconnected when XXXX calls the * * assembler program they want to debug. * * (PM18664 at 9.1) * * * * -Updating a variable monitor in * * optimized COBOL results in: EQA1418E * * One or more of multiple updates were * * not processed. * * (PM18726 at 10.1) * * * * -Exception occurs in * * EQA0AIP1+x'00009414'. The failure is * * occurring on the EXecute instruction * * (44F0B1C6), which is really trying to * * process an MVC instruction (D207 E000 * * 8002). Exception occurs due to an * * invalid address in reg8. * * (PM19035 at 10.1) * * * * -Customer received "EQA1980E The Debug * * File for xxxxxx could not be opened or * * read." when they used SET DEFAULT * * LISTINGS to a copied debug file. * * (PM19270 at 9.1) * * * * -LE U4088 while listing large * * structure. * * (PM19541 at 9.1) * * * * -AbendS0C6 occurred due to bad branch * * out of EQADCCXR. The module was * * attempting to branch to another * * routine whose address should be * * contained in DtRcb control block. * * However, the control block was * * overlaid. This APAR is intended to * * prevent the control block from being * * overlaid. * * (PM20478 at 10.1) * * * * -While debugging a program that expects * * to receive CEE067 condition, the * * message was not issued. * * (PM20538 at 9.1) * * * * -AbendS0C4 in EQANCDBG+x'0000259C' on a * * Load instruction (5890 32F4) due to an * * invalid value in reg3. Problem occurs * * when user issues a QUIT command while * * in Debug Tool. * * (PM20801 at 10.1) * * * * -On entry to an assembler program * * ABENDS0C1 occurs after entering Debug * * Tool command 'LIST R13->+4'. The * * following message is also being * * issued. "+EQA9988S A debug tool has * * terminated the enclave. +nmest:ABEND * * at EQA00EVH+000CCE92 / PSW: ....." * * (PM21358 at 10.1) * * * * -During a debug session, user sets * * fields to monitor, and then finishes * * and gets out of debug, but when they * * start it up again, the fields that * * were set to monitor are either no * * longer there or get an error and have * * to be reset for monitoring. Here is * * the error received: * * * * An error occurred during expression * * evaluation. * * * * This is because the hyphens in the * * COBOL variable names now have spaces * * surrounding them. This problem can be * * seen with commands such as: * * * * MONITOR LIST BRK-INSURANCE-LINE(2), * * * * when also debugging a C program. This * * is due to the fact that data names in * * Assembler and in C are not valid with * * hyphens. * * (PM21196 at 8.1) * * * * -Error in Monitor window when Scroll * * set to CSR. * * The problem occurs during a debugging * * session on a 3270 screen and having * * the "Scroll" set to "CSR". After * * having put several variables in the * * MONITOR window, the cursor has been * * moved inside the MONITOR window and * * the PF8 key (DOWN) had been selected * * several times; after that the PF7 key * * (UP) has been selected once and then a * * second time: the second attempt and * * any other attempt to go UP with the * * PF7 key appear to fail. The problem * * always happens when the cursor is on * * the second-last line of the MONITOR * * window. * * (PM22320 at 10.1) * * * * -Customer is unable to start Debug * * Tool using DTSU setup file. * * Allocation failed - EQAZ050W * * Allocation of a temp data set. * * (PM22676 at 10.1) * * * * -EQALANGX at FA PTF UK59774 level. * * EQALANGX version 2010-08-19 22:17 * * * * -If Debug Tool is running in Separate * * (formerly known as Dual) terminal mode * * or in Screen Control Mode, it runs * * with the userid of the application and * * not the userid of the display * * terminal. This causes * * confusion/problems with SAVESETS and * * SAVEBPS. * * * * This service will change Debug Tool to * * use the userid of the display * * terminal. * * * * -Messaging is enhanced when resources * * are exhausted during expression * * evaluation. See the ++HOLD for * * information about changes to the * * Explanation and Programmer response * * for EQA1484E. * * * * -DTCN plug-in: Test Connection error * * handling fixes. See the ++HOLD DOC * * for information about installing this * * update. * * * * -Some storage isses are resolved by * * limiting the monitor table to 30000 * * lines (SET MONITOR LIMIT is thus * * limited to 30000). * * * * These defects have already been shipped * * via separate PTFs: * * * * PM09411 / UK58904 PE * * -If a Debug Tool user is stopped after * * a STEP, and a previously-set STIMER or * * STIMERM interval expires, and a timer * * exit routine was specified, Debug Tool * * can take an exception (such as an * * s0c1). * * * * PM21383 / UK60143 * * -A Debug Tool session using Terminal * * Interface Manager hangs after starting * * the program after APPLY of UK58904. * * * * --- End Service --- * * * * * * PM23045 / UK60814: * * * * Error message EQA30STO Internal Error * * 00000011 is issued, followed by a * * program check in EQA30STO at offset * * x'138E'. The problem is caused by an * * invalid length of a storage fragment. * * * * * **************************************************************** * RECOMMENDATION: Install this PTF if you have already * * installed PTF UK60766 and use a CICS DTCN * * VSAM repository * * * * or * * * * need the fixes in UK60766 or UK60814. * **************************************************************** Error corrected in UK60766 that caused problems with CICS DTCN VSAM repository. Also includes the fixes in UK60766 and UK60814.
Problem conclusion
Error resolved.
Temporary fix
Comments
APAR Information
APAR number
PM24362
Reported component name
DEBUG TOOL Z/OS
Reported component ID
5655V5000
Reported release
A10
Status
CLOSED PER
PE
YesPE
HIPER
YesHIPER
Special Attention
NoSpecatt / Xsystem
Submitted date
2010-10-12
Closed date
2010-10-12
Last modified date
2010-11-02
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
UK61265
Modules/Macros
EQA00ABE EQA00CIC EQA00CND EQA0CINF EQA0SCL1 EQA0SCL2 EQA0SRP1 EQA0SRP2 EQA10PRC EQA60DTC EQA80VER EQADCCN0 EQADCCN1 EQADCCN2 EQADCCN3 EQADCCN4 EQADCCNH EQADCCXR EQADCDEL EQADCREP EQADCTSQ EQADCVSA EQADCVSD EQADCXXT EQALMA EQAYSMMN
Fix information
Fixed component name
DEBUG TOOL Z/OS
Fixed component ID
5655V5000
Applicable component levels
RA10 PSY UK61265
UP10/10/14 P F010
Fix is available
Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.
[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG19M","label":"APARs - z\/OS environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"A10","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSTQWA","label":"IBM Debug for z\/OS"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"A10","Edition":"","Line of Business":{"code":"LOB35","label":"Mainframe SW"}}]
Document Information
Modified date:
15 October 2020